Hi,
I'm testing swsusp with the 2.6.0-test1 kernel. I'm experiencing
problems when suspending (S4) with usb modules loaded (still hve to
narow down which one gives problem - ready to help debugging if not a
known issue).
the 2 problems are:
1. cannot suspend with usb modules loaded (as said) and I have to stop
hotplug to be able to go S4
2. after resuming an X session the synaptics touchpad goes nuts (not
imeediately anyway)
the common workaround is reloading usb modules after resuming restores
the synaptics tp too :)
NB: I also have an USB mouse attached
when suspending I just issue a
/etc/init.d/hotplug stop && echo 4 > /proc/acpi/sleep
here' some logs (I can provide any other useful info):
** relevant kernel config
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_MOUSE=y
** from /v/l/messages
Jul 16 22:52:02 inferi kernel: pdflush left refrigerator
--> Jul 16 22:54:18 inferi kernel: psmouse.c: Lost synchronization, throwing 2 bytes away.
here the TP is gone
Jul 16 22:54:37 inferi kernel: drivers/usb/core/usb.c: registered new driver usbfs
Jul 16 22:54:37 inferi kernel: drivers/usb/core/usb.c: registered new driver hub
Jul 16 22:54:37 inferi kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
Jul 16 22:54:37 inferi kernel: uhci-hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub
Jul 16 22:54:37 inferi kernel: uhci-hcd 0000:00:1d.0: irq 9, io base 00001800
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jul 16 22:54:38 inferi kernel: hub 1-0:0: USB hub found
Jul 16 22:54:38 inferi kernel: hub 1-0:0: 2 ports detected
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.1: irq 9, io base 00001820
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jul 16 22:54:38 inferi kernel: hub 2-0:0: USB hub found
Jul 16 22:54:38 inferi kernel: hub 2-0:0: 2 ports detected
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.2: Intel Corp. 82801CA/CAM USB (Hub
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.2: irq 9, io base 00001840
Jul 16 22:54:38 inferi kernel: uhci-hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jul 16 22:54:38 inferi kernel: hub 3-0:0: USB hub found
Jul 16 22:54:38 inferi kernel: hub 3-0:0: 2 ports detected
Jul 16 22:54:38 inferi usb.agent: ... no modules for USB product 0/0/206
Jul 16 22:54:38 inferi usb.agent: ... no modules for USB product 0/0/206
Jul 16 22:54:38 inferi kernel: hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
Jul 16 22:54:39 inferi kernel: hub 2-0:0: new USB device on port 1, assigned address 2
Jul 16 22:54:39 inferi kernel: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1
Jul 16 22:54:39 inferi kernel: drivers/usb/core/usb.c: registered new driver hid
Jul 16 22:54:39 inferi kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jul 16 22:54:39 inferi kernel: hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
Jul 16 22:54:39 inferi kernel: hub 3-0:0: new USB device on port 1, assigned address 2
Jul 16 22:54:39 inferi kernel: Initializing USB Mass Storage driver...
Jul 16 22:54:39 inferi kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jul 16 22:54:39 inferi kernel: Vendor: Sony Model: MSC-U02 Rev: 1.00
Jul 16 22:54:39 inferi kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 16 22:54:40 inferi scsi.agent: how to add device type= at /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:0/host3/3:0:0:0 ??
Jul 16 22:54:40 inferi kernel: Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
Jul 16 22:54:40 inferi kernel: Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0
Jul 16 22:54:40 inferi kernel: drivers/usb/core/usb.c: registered new driver usb-storage
Jul 16 22:54:40 inferi kernel: USB Mass Storage support registered.
** lsmod
Module Size Used by
usb_storage 27648 0
hid 23680 0
uhci_hcd 30088 0
usbcore 97748 5 usb_storage,hid,uhci_hcd
nls_iso8859_1 3968 0
isofs 31672 0
zlib_inflate 21760 1 isofs
sg 30348 0
parport_pc 21636 0
parport 23104 1 parport_pc
nfs 92716 8
lockd 59344 2 nfs,[unsafe]
sunrpc 119876 11 nfs,lockd
ds 11392 4
yenta_socket 11008 0
pcmcia_core 59776 2 ds,yenta_socket
e100 60548 0
sd_mod 12192 0
ipt_state 1536 1
ip_conntrack 26004 1 ipt_state
iptable_filter 2304 1
ip_tables 16512 2 ipt_state,iptable_filter
scsi_mod 64788 3 usb_storage,sg,sd_mod
snd_seq_oss 32768 0
snd_seq_midi_event 6144 1 snd_seq_oss
snd_seq 53200 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 49924 0
snd_mixer_oss 17408 2 snd_pcm_oss
snd_intel8x0 27844 1
snd_ac97_codec 49284 1 snd_intel8x0
snd_pcm 88704 2 snd_pcm_oss,snd_intel8x0
snd_timer 22144 2 snd_seq,snd_pcm
snd_page_alloc 8196 2 snd_intel8x0,snd_pcm
snd_mpu401_uart 6400 1 snd_intel8x0
snd_rawmidi 20736 1 snd_mpu401_uart
snd_seq_device 6660 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 44292 12 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7232 2 snd
rtc 10916 0
** /proc/usb
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test1 uhci-hcd
S: Product=Intel Corp. 82801CA/CAM USB (Hub
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0056 Rev= 1.80
S: Manufacturer=Sony
S: Product=USB Memory Stick Slot
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=05 Prot=00 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=1ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test1 uhci-hcd
S: Product=Intel Corp. 82801CA/CAM USB (Hub
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c001 Rev= 4.10
S: Manufacturer=Logitech
S: Product=USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test1 uhci-hcd
S: Product=Intel Corp. 82801CA/CAM USB (Hub
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
** lspci
00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 41)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 01)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 01)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 01)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02)
02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
-- mattia :wq! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:26 EST