Hi,
I am getting a strange error while trying to use my ide-tape drive in
kernel 2.4.20-18.9. In dmesg I see that the kernel sees the tape drive:
hdf: Seagate STT8000A, ATAPI TAPE drive
ide-tape: hdf <-> ht0: Seagate STT8000A rev 5.02
ide-tape: hdf <-> ht0: 600KBps, 14*26kB buffer, 5850kB pipeline, 80ms
tDSC, DMA
However, when I try and do a mt -f /dev/ht0 status , I get a device or
resource busy error, and the following gets spit into dmesg:
ide-tape: ht0: I/O error, pc = 34, key = 3, asc = 30, ascq = 0
ide-tape: ht0: I/O error, pc = 1, key = 3, asc = 30, ascq = 0
ide-tape: ht0: I/O error, pc = 0, key = 3, asc = 30, ascq = 0
ide-tape: ht0: drive not ready
What could be the problem here?
Thanks,
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jul 07 2003 - 22:00:16 EST