Note: forwarded message attached.
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
attached mail follows:
From: ybusenet@yahoo.com (YB)
Newsgroups: linux.kernel
Subject: Re: Oops in reading cdrom (2.4.21-rc6)
References: <20030612204023$5735@gated-at.bofh.it>
NNTP-Posting-Host: 12.235.93.124
Message-ID: <1ce5eed2.0306222156.9b980b9@posting.google.com>
If any one is interested, this problem was fixed by recompiling the kernel
with gcc 2.95.3. Earlier I had used gcc 3.1.
Regards,
-- YogeshY B <ybusenet@yahoo.com> wrote in message news:<20030612204023$5735@gated-at.bofh.it>... > Hardware: > Leadtek K7NCR18G-Pro (nforce2) with Athlon 1700+. > Yamaha CDRW 2200E on hdc > > I have > CONFIG_IDEDMA_ONLYDISK=y > > ide-cd is a module. Command line is hdc=ide-scsi > In single user mode.. > mount /dev/scd0 /mnt/cdrom > read files from cdrom ... OK > umount /mnt/cdrom > mount /dev/scd0 /mnt/cdrom > read files from cdrom ... hang.. > press ctl+alt+del after a minute or so => oops!! > > ----------------------Oops------------------------------------------------- > > Syncing hardware clock to system time. Kernel bug at > ide-scsi.c:512! > Invalid operand: 0000 > > CPU 0 > EIP: 0010:[<de8a8a4f>] Not tainted > EFLAGS: 0010286 > eax: c1be9280 ebx: c0306d04 ecx: 5e6cc224 edx: > c01a9e60 > esi: c15cfcc0 edi: ddbe7d80 ebp: c02afe94 esp: > c02a5e70 > ds: 0018 es: 0018 ss: 0018 > > stack: 00000172 c0306d04 00000008 00000080 000001f4 > ddbe7d80 c0306d04 > 00000000 00000000 c02a5ec8 c01b250a c0306d04 c15cfcc0 > 00000000 > 00000088 > 000001f4 dd898940 00000000 00000016 c0306d04 c15c9280 > dd898ec0 > c02a5eec > c01b2680 > > call trace: c01b250a c01b2686 c01b292a c01b2840 > c0125463 c0124bed > c0121446 c0121366 c0121197 c010a700 c010760 c010cb98 > c0107060 c0107083 > c01070f2 c0105666 > > code: 0c 0b 00 02 be a3 8a de 8b 56 38 a1 44 65 2d c0 > 89 d1 29 c1 > <0> Kernel panic: Aiee! Killing interrupt handler. > -------------------------Ksymoops > o/p-------------------------------------- > Syncing hardware clock to system time. Kernel bug at > ide-scsi.c:512! > Invalid operand: 0000 > CPU 0 > EIP: 0010:[<de8a8a4f>] Not tainted > Using defaults from ksymoops -t elf32-i386 -a i386 > EFLAGS: 0010286 > eax: c1be9280 ebx: c0306d04 ecx: 5e6cc224 edx: > c01a9e60 > esi: c15cfcc0 edi: ddbe7d80 ebp: c02afe94 esp: > c02a5e70 > ds: 0018 es: 0018 ss: 0018 > stack: 00000172 c0306d04 00000008 00000080 000001f4 > ddbe7d80 c0306d04 > 00000000 00000000 c02a5ec8 c01b250a c0306d04 c15cfcc0 > 00000000 > 00000088 > 000001f4 dd898940 00000000 00000016 c0306d04 c15c9280 > dd898ec0 > c02a5eec > c01b2680 > call trace: c01b250a c01b2686 c01b292a c01b2840 > c0125463 c0124bed > c0121446 c0121366 c0121197 c010a700 c010760 c010cb98 > c0107060 c0107083 > c01070f2 c0105666 > code: 0c 0b 00 02 be a3 8a de 8b 56 38 a1 44 65 2d c0 > 89 d1 29 c1 > > >>EIP; de8a8a4f <[ipchains].bss.end+f740/1acf1> > <===== > Trace; c01b250a <start_request+18a/200> > Trace; c01b2686 <ide_do_request+b6/190> > Trace; c01b292a <ide_timer_expiry+ea/1c0> > Trace; c01b2840 <ide_timer_expiry+0/1c0> > Trace; c0125463 <run_timer_list+f3/160> > Trace; c0124bed <update_wall_time+d/40> > Code; de8a8a4f <[ipchains].bss.end+f740/1acf1> > 00000000 <_EIP>: > Code; de8a8a4f <[ipchains].bss.end+f740/1acf1> > <===== > 0: 0c 0b or $0xb,%al > <===== > Code; de8a8a51 <[ipchains].bss.end+f742/1acf1> > 2: 00 02 add %al,(%edx) > Code; de8a8a53 <[ipchains].bss.end+f744/1acf1> > 4: be a3 8a de 8b mov > $0x8bde8aa3,%esi > Code; de8a8a58 <[ipchains].bss.end+f749/1acf1> > 9: 56 push %esi > Code; de8a8a59 <[ipchains].bss.end+f74a/1acf1> > a: 38 a1 44 65 2d c0 cmp > %ah,0xc02d6544(%ecx) > Code; de8a8a5f <[ipchains].bss.end+f750/1acf1> > 10: 89 d1 mov %edx,%ecx > Code; de8a8a61 <[ipchains].bss.end+f752/1acf1> > 12: 29 c1 sub %eax,%ecx > > <0> Kernel panic: Aiee! Killing interrupt handler. > > 1 warning issued. Results may not be reliable. > > -------------------------From > dmesg---------------------------------------- > > ide: Assuming 33MHz system bus speed for PIO modes; > override with > idebus=xx > NFORCE2: IDE controller at PCI slot 00:09.0 > NFORCE2: chipset revision 162 > NFORCE2: not 100% native mode: will probe irqs later > AMD_IDE: Bios didn't set cable bits corectly. Enabling > workaround. > ide: Assuming 33MHz system bus speed for PIO modes; > override with > idebus=xx > AMD_IDE: PCI device 10de:0065 (nVidia Corporation) > (rev a2) UDMA100 > controller on pci00:09.0 > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: > hda:DMA, hdb:DMA > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: > hdc:DMA, hdd:DMA > hda: WDC WD153BA, ATA DISK drive > hdb: Maxtor 6Y080P0, ATA DISK drive > blk: queue c03068c0, I/O limit 4095Mb (mask > 0xffffffff) > blk: queue c03069fc, I/O limit 4095Mb (mask > 0xffffffff) > hdc: YAMAHA CRW2200E, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: attached ide-disk driver. > hda: host protected area => 1 > hda: 30043440 sectors (15382 MB) w/2048KiB Cache, > CHS=1870/255/63, > UDMA(66) > hdb: attached ide-disk driver. > hdb: host protected area => 1 > hdb: 160086528 sectors (81964 MB) w/7936KiB Cache, > CHS=9964/255/63, > UDMA(100) > ide-floppy driver 0.99.newide > ... > ide-cd: ignoring drive hdc > ... > ------------------cat > /proc/ide/amd74xx------------------------------- > ----------AMD BusMastering IDE > Configuration---------------- > Driver Version: 2.10 > %ah,0xc02d6544(%ecx) > South Bridge: PCI device > 10de:0065 (nVidia > Corporation) > Revision: IDE 0xa2x,%ecx > Highest DMA rate: UDMA100cf1> > BM-DMA base: 0xf000eax,%ecx > PCI clock: 33.3MHz > -----------------------Primary IDE-------Secondary > IDE------ > Prefetch Buffer: yes yes > Post Write Buffer: yes yes > Enabled: yes > yes6/ > Simplex only: no > nonfig > Cable Type: 80w 40w > -------------------drive0----drive1----drive2----drive3----- > Transfer Mode: UDMA UDMA PIO > DMA > Address Setup: 30ns 30ns 30ns > 90ns > Cmd Active: 90ns 90ns 90ns > 90ns > Cmd Recovery: 30ns 30ns 30ns > 30ns > Data Active: 90ns 90ns 90ns > 330ns > Data Recovery: 30ns 30ns 30ns > 270ns > Cycle Time: 30ns 20ns 120ns > 600ns > Transfer Rate: 66.6MB/s 99.9MB/s 16.6MB/s > 3.3MB/s > --------------------------Oops----------------------------------- > > > __________________________________ > Do you Yahoo!? > Yahoo! Calendar - Free online calendar with sync to Outlook(TM). > http://calendar.yahoo.com > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jun 23 2003 - 22:00:39 EST