Re: xircom card bus with 2.4.20 link trouble

From: Mike Dresser (mdresser_l@windsormachine.com)
Date: Sun Jun 22 2003 - 14:47:40 EST


On 21 Jun 2003, Alan Cox wrote:

> On Gwe, 2003-06-20 at 16:49, Mike Dresser wrote:
> > Now if only DMA mode would work on the Opti 621 chipset inside this
> > Omnibook 5500/5700 hybrid laptop :) Then it wouldn't take 38 minutes to
> > compile.
>
> It should do - drivers/ide/pci/opti621.c

Indeed, I have it compiled in even.

Let me see if hte laptop is turned on currently.

Unfortunately, no. But anyways, it does the classic error of {your drive}
{shouldn't do this}

and then disables DMA mode, and goes back to working.

It's an HP Omnibook 5700, and it's a Toshiba 1.3 gig drive in there. I
don't remember if my Omnibook 5500 did it, and it's a pain to take the
donor screen back off the 5700 and putting it on the 5500 to try.

I had to disable "automatically enable DMA" for the laptop not to jam up
for a minute while it figures out the DMA mode isn't going to work.

It doesn't work in windows either for that matter, if I remember right the
option is completely greyed out. Blacklist on windows?

I will check the exact lspci and hdparm -i when I get to the office
tomorrow.

Mike

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Jun 23 2003 - 22:00:38 EST