Russell King <rmk@arm.linux.org.uk> writes:
> On Sun, Jun 15, 2003 at 08:50:49PM +0300, Jaakko Niemi wrote:
>> I seem to be able to reproduce crash with 2.7.70-bk and .71.
>> First, I tried getting dlink dwl-650 wlan card up on my thinkpad
>> 570e, but orinoco_cs does not seem to want to even look at it.
>> (any ideas what's the deal with that, btw?)
>
> What happens if you plug in your cardbus card before the dlink wlan card?
Same thing.
> If that doesn't work, please repeat your procedure to cause the oops.
If I boot without the card, I don't seem to be able to get any
packets out at all, but if I boot with the card inserted, the
driver loads normally and I can get the interface up. Still, if
I remove it and reinsert few times, crash happens.
Looks like I now get repeatedly the oops when removing the
card for the second time.
> In either case, could you send the output of lspci -vv at the
> following points:
>
> - directly after boot
lspci1.boot
> - after you insert the cardbus card
lspci2.inserted
lspci3.driver is after installing the driver
> - after you remove it
lspci4.removed
lspci5.reinserted is after reinsert
> - after you re-insert (and get the oops)
lspci segfaults after the oops.
dmesg.out and dmes.out.ksymoops have the latest oops.
--j
This archive was generated by hypermail 2b29 : Sun Jun 15 2003 - 22:00:43 EST