Alan,
A couple of questions if you please.
1) When I compile the siimage driver into the kernel, the ide buses are
scanned in the following order:
IDE0 - SATA primary - hda, hdb
IDE1 - SATA secondary - hdc, hdd
IDE2 - ATA tertiary - hde, hdf
IDE3 - ATA quandrary hdg, hdh
I want the ATA to be IDE0/1 and SATA to be IDE2/3. I have noticed from
some of the posts about the siimage driver on the ASUS nforce2 mobo this
is the apparent order scanned. My mobo is an Abit NF7-S nforce2. Is
there someway of controlling the order of scannin the IDE buses? I
tried append="ide=reverse" to no avail.
2) To try and get the nforce2 IDE buses scanned first, I compiled
siimage as a module, but when I did an "insmod siimage" I get an
unresolved external, "noautodma", in siimage.
I'd appreciate any help you can offer.
Thanks,
John Copeland
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 15 2003 - 22:00:34 EST