Hi,
please apply.
-- Bartlomiej[ide] switch ide to taskfile IO
- rewrite taskfile PIO handlers (they now comply with ide state machine and use bio walking) - switch ide-disk.c to use *only* taskfile IO - swicth pdc4030.c to use *only* taskfile IO (untested) - remove old cruft (>600 lines)
drivers/ide/Kconfig | 6 drivers/ide/ide-disk.c | 422 ---------------------------------- drivers/ide/ide-taskfile.c | 521 ++++++++++++++++--------------------------- drivers/ide/legacy/pdc4030.c | 220 ++++-------------- include/linux/blkdev.h | 1 include/linux/ide.h | 47 ++- 6 files changed, 290 insertions(+), 927 deletions(-)
diff -puN drivers/ide/Kconfig~ide-taskfile-io-switch drivers/ide/Kconfig --- linux-2.5.70-bk11/drivers/ide/Kconfig~ide-taskfile-io-switch Sat Jun 7 22:33:38 2003 +++ linux-2.5.70-bk11-root/drivers/ide/Kconfig Sat Jun 7 22:33:38 2003 @@ -219,7 +219,6 @@ config IDE_TASK_IOCTL If you are unsure, say N here. -#bool ' IDE Taskfile IO' CONFIG_IDE_TASKFILE_IO comment "IDE chipset support/bugfixes" depends on BLK_DEV_IDE @@ -1071,11 +1070,6 @@ config BLK_DEV_PDC202XX If unsure, say N. -##if [ "$CONFIG_IDE_TASKFILE_IO" = "y" ]; then -## dep_mbool CONFIG_BLK_DEV_TF_DISK $CONFIG_BLK_DEV_IDEDISK -##else -## dep_mbool CONFIG_BLK_DEV_NTF_DISK $CONFIG_BLK_DEV_IDEDISK -##fi config BLK_DEV_IDE_MODES bool depends on BLK_DEV_4DRIVES || BLK_DEV_ALI14XX || BLK_DEV_DTC2278 || BLK_DEV_HT6560B || BLK_DEV_PDC4030 || BLK_DEV_QD65XX || BLK_DEV_UMC8672 || BLK_DEV_AEC62XX=y || BLK_DEV_ALI15X3=y || BLK_DEV_AMD74XX=y || BLK_DEV_CMD640 || BLK_DEV_CMD64X=y || BLK_DEV_CS5530=y || BLK_DEV_CY82C693=y || BLK_DEV_HPT34X=y || BLK_DEV_HPT366=y || BLK_DEV_IDE_PMAC || BLK_DEV_IT8172 || BLK_DEV_MPC8xx_IDE || BLK_DEV_NFORCE=y || BLK_DEV_OPTI621=y || BLK_DEV_PDC202XX || BLK_DEV_PIIX=y || BLK_DEV_SVWKS=y || BLK_DEV_SIIMAGE=y || BLK_DEV_SIS5513=y || BLK_DEV_SL82C105=y || BLK_DEV_SLC90E66=y || BLK_DEV_VIA82CXXX=y diff -puN drivers/ide/ide-disk.c~ide-taskfile-io-switch drivers/ide/ide-disk.c --- linux-2.5.70-bk11/drivers/ide/ide-disk.c~ide-taskfile-io-switch Sat Jun 7 22:33:38 2003 +++ linux-2.5.70-bk11-root/drivers/ide/ide-disk.c Sat Jun 7 22:33:38 2003 @@ -136,423 +136,6 @@ static int idedisk_start_tag(ide_drive_t return ret; } -#ifndef CONFIG_IDE_TASKFILE_IO - -static int driver_blocked; - -/* - * read_intr() is the handler for disk read/multread interrupts - */ -static ide_startstop_t read_intr (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u32 i = 0, nsect = 0, msect = drive->mult_count; - struct request *rq; - unsigned long flags; - u8 stat; - char *to; - - /* new way for dealing with premature shared PCI interrupts */ - if (!OK_STAT(stat=hwif->INB(IDE_STATUS_REG),DATA_READY,BAD_R_STAT)) { - if (stat & (ERR_STAT|DRQ_STAT)) { - return DRIVER(drive)->error(drive, "read_intr", stat); - } - /* no data yet, so wait for another interrupt */ - ide_set_handler(drive, &read_intr, WAIT_CMD, NULL); - return ide_started; - } - -read_next: - rq = HWGROUP(drive)->rq; - if (msect) { - if ((nsect = rq->current_nr_sectors) > msect) - nsect = msect; - msect -= nsect; - } else - nsect = 1; - to = ide_map_buffer(rq, &flags); - taskfile_input_data(drive, to, nsect * SECTOR_WORDS); -#ifdef DEBUG - printk("%s: read: sectors(%ld-%ld), buffer=0x%08lx, remaining=%ld\n", - drive->name, rq->sector, rq->sector+nsect-1, - (unsigned long) rq->buffer+(nsect<<9), rq->nr_sectors-nsect); -#endif - ide_unmap_buffer(rq, to, &flags); - rq->sector += nsect; - rq->errors = 0; - i = (rq->nr_sectors -= nsect); - if (((long)(rq->current_nr_sectors -= nsect)) <= 0) - ide_end_request(drive, 1, rq->hard_cur_sectors); - /* - * Another BH Page walker and DATA INTEGRITY Questioned on ERROR. - * If passed back up on multimode read, BAD DATA could be ACKED - * to FILE SYSTEMS above ... - */ - if (i > 0) { - if (msect) - goto read_next; - ide_set_handler(drive, &read_intr, WAIT_CMD, NULL); - return ide_started; - } - return ide_stopped; -} - -/* - * write_intr() is the handler for disk write interrupts - */ -static ide_startstop_t write_intr (ide_drive_t *drive) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); - ide_hwif_t *hwif = HWIF(drive); - struct request *rq = hwgroup->rq; - u32 i = 0; - u8 stat; - - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), - DRIVE_READY, drive->bad_wstat)) { - printk("%s: write_intr error1: nr_sectors=%ld, stat=0x%02x\n", - drive->name, rq->nr_sectors, stat); - } else { -#ifdef DEBUG - printk("%s: write: sector %ld, buffer=0x%08lx, remaining=%ld\n", - drive->name, rq->sector, (unsigned long) rq->buffer, - rq->nr_sectors-1); -#endif - if ((rq->nr_sectors == 1) ^ ((stat & DRQ_STAT) != 0)) { - rq->sector++; - rq->errors = 0; - i = --rq->nr_sectors; - --rq->current_nr_sectors; - if (((long)rq->current_nr_sectors) <= 0) - ide_end_request(drive, 1, rq->hard_cur_sectors); - if (i > 0) { - unsigned long flags; - char *to = ide_map_buffer(rq, &flags); - taskfile_output_data(drive, to, SECTOR_WORDS); - ide_unmap_buffer(rq, to, &flags); - ide_set_handler(drive, &write_intr, WAIT_CMD, NULL); - return ide_started; - } - return ide_stopped; - } - /* the original code did this here (?) */ - return ide_stopped; - } - return DRIVER(drive)->error(drive, "write_intr", stat); -} - -/* - * ide_multwrite() transfers a block of up to mcount sectors of data - * to a drive as part of a disk multiple-sector write operation. - * - * Returns 0 on success. - * - * Note that we may be called from two contexts - __ide_do_rw_disk() context - * and IRQ context. The IRQ can happen any time after we've output the - * full "mcount" number of sectors, so we must make sure we update the - * state _before_ we output the final part of the data! - * - * The update and return to BH is a BLOCK Layer Fakey to get more data - * to satisfy the hardware atomic segment. If the hardware atomic segment - * is shorter or smaller than the BH segment then we should be OKAY. - * This is only valid if we can rewind the rq->current_nr_sectors counter. - */ -int ide_multwrite (ide_drive_t *drive, unsigned int mcount) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); - struct request *rq = &hwgroup->wrq; - - do { - char *buffer; - int nsect = rq->current_nr_sectors; - unsigned long flags; - - if (nsect > mcount) - nsect = mcount; - mcount -= nsect; - buffer = ide_map_buffer(rq, &flags); - - rq->sector += nsect; - rq->nr_sectors -= nsect; - rq->current_nr_sectors -= nsect; - - /* Do we move to the next bh after this? */ - if (!rq->current_nr_sectors) { - struct bio *bio = rq->bio; - - /* - * only move to next bio, when we have processed - * all bvecs in this one. - */ - if (++bio->bi_idx >= bio->bi_vcnt) { - bio->bi_idx = 0; - bio = bio->bi_next; - } - - /* end early early we ran out of requests */ - if (!bio) { - mcount = 0; - } else { - rq->bio = bio; - rq->current_nr_sectors = bio_iovec(bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - } - } - - /* - * Ok, we're all setup for the interrupt - * re-entering us on the last transfer. - */ - taskfile_output_data(drive, buffer, nsect<<7); - ide_unmap_buffer(rq, buffer, &flags); - } while (mcount); - - return 0; -} - -/* - * multwrite_intr() is the handler for disk multwrite interrupts - */ -static ide_startstop_t multwrite_intr (ide_drive_t *drive) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); - ide_hwif_t *hwif = HWIF(drive); - struct request *rq = &hwgroup->wrq; - u8 stat; - - stat = hwif->INB(IDE_STATUS_REG); - if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) { - if (stat & DRQ_STAT) { - /* - * The drive wants data. Remember rq is the copy - * of the request - */ - if (rq->nr_sectors) { - if (ide_multwrite(drive, drive->mult_count)) - return ide_stopped; - ide_set_handler(drive, &multwrite_intr, WAIT_CMD, NULL); - return ide_started; - } - } else { - /* - * If the copy has all the blocks completed then - * we can end the original request. - */ - if (!rq->nr_sectors) { /* all done? */ - rq = hwgroup->rq; - ide_end_request(drive, 1, rq->nr_sectors); - return ide_stopped; - } - } - /* the original code did this here (?) */ - return ide_stopped; - } - return DRIVER(drive)->error(drive, "multwrite_intr", stat); -} - -/* - * __ide_do_rw_disk() issues READ and WRITE commands to a disk, - * using LBA if supported, or CHS otherwise, to address sectors. - * It also takes care of issuing special DRIVE_CMDs. - */ -ide_startstop_t __ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 lba48 = (drive->addressing == 1) ? 1 : 0; - task_ioreg_t command = WIN_NOP; - ata_nsector_t nsectors; - - nsectors.all = (u16) rq->nr_sectors; - - if (driver_blocked) - panic("Request while ide driver is blocked?"); - - if (drive->using_tcq && idedisk_start_tag(drive, rq)) { - if (!ata_pending_commands(drive)) - BUG(); - - return ide_started; - } - - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - - if (drive->select.b.lba) { - if (drive->addressing == 1) { - task_ioreg_t tasklets[10]; - - if (blk_rq_tagged(rq)) { - tasklets[0] = nsectors.b.low; - tasklets[1] = nsectors.b.high; - tasklets[2] = rq->tag << 3; - tasklets[3] = 0; - } else { - tasklets[0] = 0; - tasklets[1] = 0; - tasklets[2] = nsectors.b.low; - tasklets[3] = nsectors.b.high; - } - - tasklets[4] = (task_ioreg_t) block; - tasklets[5] = (task_ioreg_t) (block>>8); - tasklets[6] = (task_ioreg_t) (block>>16); - tasklets[7] = (task_ioreg_t) (block>>24); - if (sizeof(block) == 4) { - tasklets[8] = (task_ioreg_t) 0; - tasklets[9] = (task_ioreg_t) 0; - } else { - tasklets[8] = (task_ioreg_t)((u64)block >> 32); - tasklets[9] = (task_ioreg_t)((u64)block >> 40); - } -#ifdef DEBUG - printk("%s: %sing: LBAsect=%lu, sectors=%ld, " - "buffer=0x%08lx, LBAsect=0x%012lx\n", - drive->name, - rq_data_dir(rq)==READ?"read":"writ", - block, - rq->nr_sectors, - (unsigned long) rq->buffer, - block); - printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", - drive->name, tasklets[3], tasklets[2], - tasklets[9], tasklets[8], tasklets[7], - tasklets[6], tasklets[5], tasklets[4]); -#endif - hwif->OUTB(tasklets[1], IDE_FEATURE_REG); - hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); - hwif->OUTB(tasklets[7], IDE_SECTOR_REG); - hwif->OUTB(tasklets[8], IDE_LCYL_REG); - hwif->OUTB(tasklets[9], IDE_HCYL_REG); - - hwif->OUTB(tasklets[0], IDE_FEATURE_REG); - hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); - hwif->OUTB(tasklets[4], IDE_SECTOR_REG); - hwif->OUTB(tasklets[5], IDE_LCYL_REG); - hwif->OUTB(tasklets[6], IDE_HCYL_REG); - hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); - } else { -#ifdef DEBUG - printk("%s: %sing: LBAsect=%llu, sectors=%ld, " - "buffer=0x%08lx\n", - drive->name, - rq_data_dir(rq)==READ?"read":"writ", - (unsigned long long)block, rq->nr_sectors, - (unsigned long) rq->buffer); -#endif - if (blk_rq_tagged(rq)) { - hwif->OUTB(nsectors.b.low, IDE_FEATURE_REG); - hwif->OUTB(rq->tag << 3, IDE_NSECTOR_REG); - } else { - hwif->OUTB(0x00, IDE_FEATURE_REG); - hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); - } - - hwif->OUTB(block, IDE_SECTOR_REG); - hwif->OUTB(block>>=8, IDE_LCYL_REG); - hwif->OUTB(block>>=8, IDE_HCYL_REG); - hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); - } - } else { - unsigned int sect,head,cyl,track; - track = (int)block / drive->sect; - sect = (int)block % drive->sect + 1; - hwif->OUTB(sect, IDE_SECTOR_REG); - head = track % drive->head; - cyl = track / drive->head; - - if (blk_rq_tagged(rq)) { - hwif->OUTB(nsectors.b.low, IDE_FEATURE_REG); - hwif->OUTB(rq->tag << 3, IDE_NSECTOR_REG); - } else { - hwif->OUTB(0x00, IDE_FEATURE_REG); - hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); - } - - hwif->OUTB(cyl, IDE_LCYL_REG); - hwif->OUTB(cyl>>8, IDE_HCYL_REG); - hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); -#ifdef DEBUG - printk("%s: %sing: CHS=%d/%d/%d, sectors=%ld, buffer=0x%08lx\n", - drive->name, rq_data_dir(rq)==READ?"read":"writ", cyl, - head, sect, rq->nr_sectors, (unsigned long) rq->buffer); -#endif - } - - if (rq_data_dir(rq) == READ) { - if (blk_rq_tagged(rq)) - return hwif->ide_dma_queued_read(drive); - - if (drive->using_dma && !hwif->ide_dma_read(drive)) - return ide_started; - - command = ((drive->mult_count) ? - ((lba48) ? WIN_MULTREAD_EXT : WIN_MULTREAD) : - ((lba48) ? WIN_READ_EXT : WIN_READ)); - ide_execute_command(drive, command, &read_intr, WAIT_CMD, NULL); - return ide_started; - } else if (rq_data_dir(rq) == WRITE) { - ide_startstop_t startstop; - - if (blk_rq_tagged(rq)) - return hwif->ide_dma_queued_write(drive); - - if (drive->using_dma && !(HWIF(drive)->ide_dma_write(drive))) - return ide_started; - - command = ((drive->mult_count) ? - ((lba48) ? WIN_MULTWRITE_EXT : WIN_MULTWRITE) : - ((lba48) ? WIN_WRITE_EXT : WIN_WRITE)); - hwif->OUTB(command, IDE_COMMAND_REG); - - if (ide_wait_stat(&startstop, drive, DATA_READY, - drive->bad_wstat, WAIT_DRQ)) { - printk(KERN_ERR "%s: no DRQ after issuing %s\n", - drive->name, - drive->mult_count ? "MULTWRITE" : "WRITE"); - return startstop; - } - if (!drive->unmask) - local_irq_disable(); - if (drive->mult_count) { - ide_hwgroup_t *hwgroup = HWGROUP(drive); - /* - * Ugh.. this part looks ugly because we MUST set up - * the interrupt handler before outputting the first block - * of data to be written. If we hit an error (corrupted buffer list) - * in ide_multwrite(), then we need to remove the handler/timer - * before returning. Fortunately, this NEVER happens (right?). - * - * Except when you get an error it seems... - * - * MAJOR DATA INTEGRITY BUG !!! only if we error - */ - hwgroup->wrq = *rq; /* scratchpad */ - ide_set_handler(drive, &multwrite_intr, WAIT_CMD, NULL); - if (ide_multwrite(drive, drive->mult_count)) { - unsigned long flags; - spin_lock_irqsave(&ide_lock, flags); - hwgroup->handler = NULL; - del_timer(&hwgroup->timer); - spin_unlock_irqrestore(&ide_lock, flags); - return ide_stopped; - } - } else { - unsigned long flags; - char *to = ide_map_buffer(rq, &flags); - ide_set_handler(drive, &write_intr, WAIT_CMD, NULL); - taskfile_output_data(drive, to, SECTOR_WORDS); - ide_unmap_buffer(rq, to, &flags); - } - return ide_started; - } - blk_dump_rq_flags(rq, "__ide_do_rw_disk - bad command"); - ide_end_request(drive, 0, 0); - return ide_stopped; -} -EXPORT_SYMBOL_GPL(__ide_do_rw_disk); - -#else /* CONFIG_IDE_TASKFILE_IO */ - static ide_startstop_t chs_rw_disk(ide_drive_t *, struct request *, unsigned long); static ide_startstop_t lba_28_rw_disk(ide_drive_t *, struct request *, unsigned long); static ide_startstop_t lba_48_rw_disk(ide_drive_t *, struct request *, unsigned long long); @@ -750,8 +333,6 @@ static ide_startstop_t lba_48_rw_disk (i return do_rw_taskfile(drive, &args); } -#endif /* CONFIG_IDE_TASKFILE_IO */ - static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) { ide_hwif_t *hwif = HWIF(drive); @@ -866,6 +447,9 @@ ide_startstop_t idedisk_error (ide_drive return ide_stopped; } #endif + /* make rq completion pointers new submission pointers */ + blk_rq_prep_restart(rq); + if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) { /* other bits are useless when BUSY */ rq->errors |= ERROR_RESET; diff -puN drivers/ide/ide-taskfile.c~ide-taskfile-io-switch drivers/ide/ide-taskfile.c --- linux-2.5.70-bk11/drivers/ide/ide-taskfile.c~ide-taskfile-io-switch Sat Jun 7 22:33:38 2003 +++ linux-2.5.70-bk11-root/drivers/ide/ide-taskfile.c Sat Jun 7 23:32:57 2003 @@ -5,6 +5,7 @@ * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2001-2002 Klaus Smolin * IBM Storage Technology Division + * Copyright (C) 2003 Bartlomiej Zolnierkiewicz * * The big the bad and the ugly. * @@ -58,9 +59,6 @@ #define DTF(x...) #endif -#define task_map_rq(rq, flags) ide_map_buffer((rq), (flags)) -#define task_unmap_rq(rq, buf, flags) ide_unmap_buffer((rq), (buf), (flags)) - static void ata_bswap_data (void *buffer, int wcount) { u16 *p = buffer; @@ -167,9 +165,12 @@ ide_startstop_t do_rw_taskfile (ide_driv hwif->OUTB((taskfile->device_head & HIHI) | drive->select.all, IDE_SELECT_REG); if (task->handler != NULL) { - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); - if (task->prehandler != NULL) + if (task->prehandler != NULL) { + hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); + ndelay(400); /* FIXME */ return task->prehandler(drive, task->rq); + } + ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); return ide_started; } @@ -351,404 +352,271 @@ ide_startstop_t task_no_data_intr (ide_d EXPORT_SYMBOL(task_no_data_intr); +static u8 wait_drive_not_busy(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + int retries = 5; + u8 stat; + /* + * (ks) Last sector was transfered, wait until drive is ready. + * This can take up to 10 usec. We willl wait max 50 us. + */ + while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) + udelay(10); + return stat; +} + /* - * Handler for command with PIO data-in phase, READ - */ -/* - * FIXME before 2.4 enable ... - * DATA integrity issue upon error. <andre@linux-ide.org> + * Handler for command with PIO data-in phase (Read). */ ide_startstop_t task_in_intr (ide_drive_t *drive) { - struct request *rq = HWGROUP(drive)->rq; - ide_hwif_t *hwif = HWIF(drive); - char *pBuf = NULL; - u8 stat; - unsigned long flags; + struct request *rq = HWGROUP(drive)->rq; + u8 stat, good_stat; - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),DATA_READY,BAD_R_STAT)) { - if (stat & (ERR_STAT|DRQ_STAT)) { -#if 0 - DTF("%s: attempting to recover last " \ - "sector counter status=0x%02x\n", - drive->name, stat); - /* - * Expect a BUG BOMB if we attempt to rewind the - * offset in the BH aka PAGE in the current BLOCK - * segment. This is different than the HOST segment. - */ -#endif - if (!rq->bio) - rq->current_nr_sectors++; - return DRIVER(drive)->error(drive, "task_in_intr", stat); - } - if (!(stat & BUSY_STAT)) { - DTF("task_in_intr to Soon wait for next interrupt\n"); - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - return ide_started; - } + good_stat = DATA_READY; + stat = HWIF(drive)->INB(IDE_STATUS_REG); +check_status: + if (!OK_STAT(stat, good_stat, BAD_R_STAT)) { + if (stat & (ERR_STAT | DRQ_STAT)) + return DRIVER(drive)->error(drive, __FUNCTION__, stat); + /* BUSY_STAT: No data yet, so wait for another IRQ. */ + ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); + return ide_started; } -#if 0 /* - * Holding point for a brain dump of a thought :-/ + * Complete previously submitted bios (if any). + * Status was already verifyied. */ - - if (!OK_STAT(stat,DRIVE_READY,drive->bad_wstat)) { - DTF("%s: READ attempting to recover last " \ - "sector counter status=0x%02x\n", - drive->name, stat); - rq->current_nr_sectors++; - return DRIVER(drive)->error(drive, "task_in_intr", stat); - } - if (!rq->current_nr_sectors) - if (!DRIVER(drive)->end_request(drive, 1, 0)) + while (rq->bio != rq->cbio) + if (!DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio))) return ide_stopped; + /* Complete rq->buffer based request (ioctls). */ + if (!rq->bio && !rq->nr_sectors) { + ide_end_drive_cmd(drive, stat, HWIF(drive)->INB(IDE_ERROR_REG)); + return ide_stopped; + } - if (--rq->current_nr_sectors <= 0) - if (!DRIVER(drive)->end_request(drive, 1, 0)) - return ide_stopped; -#endif + rq->errors = 0; + task_sectors(drive, rq, 1, IDE_PIO_IN); + + /* If it was the last datablock check status and finish transfer. */ + if (!rq->nr_sectors) { + good_stat = 0; + stat = wait_drive_not_busy(drive); + goto check_status; + } + + /* Still data left to transfer. */ + ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - pBuf = task_map_rq(rq, &flags); - DTF("Read: %p, rq->current_nr_sectors: %d, stat: %02x\n", - pBuf, (int) rq->current_nr_sectors, stat); - taskfile_input_data(drive, pBuf, SECTOR_WORDS); - task_unmap_rq(rq, pBuf, &flags); - /* - * FIXME :: We really can not legally get a new page/bh - * regardless, if this is the end of our segment. - * BH walking or segment can only be updated after we have a good - * hwif->INB(IDE_STATUS_REG); return. - */ - if (--rq->current_nr_sectors <= 0) - if (!DRIVER(drive)->end_request(drive, 1, 0)) - return ide_stopped; - /* - * ERM, it is techincally legal to leave/exit here but it makes - * a mess of the code ... - */ - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); return ide_started; } - EXPORT_SYMBOL(task_in_intr); /* - * Handler for command with Read Multiple + * Handler for command with PIO data-in phase (Read Multiple). */ ide_startstop_t task_mulin_intr (ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct request *rq = HWGROUP(drive)->rq; - char *pBuf = NULL; - unsigned int msect = drive->mult_count; + struct request *rq = HWGROUP(drive)->rq; + unsigned int msect = drive->mult_count; unsigned int nsect; - unsigned long flags; - u8 stat; + u8 stat, good_stat; - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),DATA_READY,BAD_R_STAT)) { - if (stat & (ERR_STAT|DRQ_STAT)) { - if (!rq->bio) { - rq->current_nr_sectors += drive->mult_count; - /* - * NOTE: could rewind beyond beginning :-/ - */ - } else { - printk(KERN_ERR "%s: MULTI-READ assume all data " \ - "transfered is bad status=0x%02x\n", - drive->name, stat); - } - return DRIVER(drive)->error(drive, "task_mulin_intr", stat); - } - /* no data yet, so wait for another interrupt */ - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_mulin_intr, WAIT_WORSTCASE, NULL); + good_stat = DATA_READY; + stat = HWIF(drive)->INB(IDE_STATUS_REG); +check_status: + if (!OK_STAT(stat, good_stat, BAD_R_STAT)) { + if (stat & (ERR_STAT | DRQ_STAT)) + return DRIVER(drive)->error(drive, __FUNCTION__, stat); + /* BUSY_STAT: No data yet, so wait for another IRQ. */ + ide_set_handler(drive, &task_mulin_intr, WAIT_WORSTCASE, NULL); return ide_started; } + /* + * Complete previously submitted bios (if any). + * Status was already verifyied. + */ + while (rq->bio != rq->cbio) + if (!DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio))) + return ide_stopped; + /* Complete rq->buffer based request (ioctls). */ + if (!rq->bio && !rq->nr_sectors) { + ide_end_drive_cmd(drive, stat, HWIF(drive)->INB(IDE_ERROR_REG)); + return ide_stopped; + } + + rq->errors = 0; do { nsect = rq->current_nr_sectors; if (nsect > msect) nsect = msect; - pBuf = task_map_rq(rq, &flags); - DTF("Multiread: %p, nsect: %d, msect: %d, " \ - " rq->current_nr_sectors: %d\n", - pBuf, nsect, msect, rq->current_nr_sectors); - taskfile_input_data(drive, pBuf, nsect * SECTOR_WORDS); - task_unmap_rq(rq, pBuf, &flags); - rq->errors = 0; - rq->current_nr_sectors -= nsect; - msect -= nsect; - /* - * FIXME :: We really can not legally get a new page/bh - * regardless, if this is the end of our segment. - * BH walking or segment can only be updated after we have a - * good hwif->INB(IDE_STATUS_REG); return. - */ - if (!rq->current_nr_sectors) { - if (!DRIVER(drive)->end_request(drive, 1, 0)) - return ide_stopped; - } - } while (msect); - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_mulin_intr, WAIT_WORSTCASE, NULL); - return ide_started; -} -EXPORT_SYMBOL(task_mulin_intr); + task_sectors(drive, rq, nsect, IDE_PIO_IN); -/* - * VERIFY ME before 2.4 ... unexpected race is possible based on details - * RMK with 74LS245/373/374 TTL buffer logic because of passthrough. - */ -ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) -{ - char *pBuf = NULL; - unsigned long flags; - ide_startstop_t startstop; + if (!rq->nr_sectors) + msect = 0; + else + msect -= nsect; + } while (msect); - if (ide_wait_stat(&startstop, drive, DATA_READY, - drive->bad_wstat, WAIT_DRQ)) { - printk(KERN_ERR "%s: no DRQ after issuing WRITE%s\n", - drive->name, - drive->addressing ? "_EXT" : ""); - return startstop; + /* If it was the last datablock check status and finish transfer. */ + if (!rq->nr_sectors) { + good_stat = 0; + stat = wait_drive_not_busy(drive); + goto check_status; } - /* For Write_sectors we need to stuff the first sector */ - pBuf = task_map_rq(rq, &flags); - taskfile_output_data(drive, pBuf, SECTOR_WORDS); - rq->current_nr_sectors--; - task_unmap_rq(rq, pBuf, &flags); + + /* Still data left to transfer. */ + ide_set_handler(drive, &task_mulin_intr, WAIT_WORSTCASE, NULL); + return ide_started; } - -EXPORT_SYMBOL(pre_task_out_intr); +EXPORT_SYMBOL(task_mulin_intr); /* - * Handler for command with PIO data-out phase WRITE - * - * WOOHOO this is a CORRECT STATE DIAGRAM NOW, <andre@linux-ide.org> + * Handler for command with PIO data-out phase (Write). */ ide_startstop_t task_out_intr (ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct request *rq = HWGROUP(drive)->rq; - char *pBuf = NULL; - unsigned long flags; + struct request *rq = HWGROUP(drive)->rq; u8 stat; - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), DRIVE_READY, drive->bad_wstat)) { - DTF("%s: WRITE attempting to recover last " \ - "sector counter status=0x%02x\n", - drive->name, stat); - rq->current_nr_sectors++; - return DRIVER(drive)->error(drive, "task_out_intr", stat); + stat = HWIF(drive)->INB(IDE_STATUS_REG); + if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) { + if ((stat & (ERR_STAT | DRQ_STAT)) || + ((stat & WRERR_STAT) && !drive->nowerr)) + return DRIVER(drive)->error(drive, __FUNCTION__, stat); + if (stat & BUSY_STAT) { + /* Not ready yet, so wait for another IRQ. */ + ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); + return ide_started; + } } - /* - * Safe to update request for partial completions. - * We have a good STATUS CHECK!!! + + /* Deal with unexpected ATA data phase. */ + if ((!(stat & DATA_READY) && rq->nr_sectors) || + ((stat & DATA_READY) && !rq->nr_sectors)) + return DRIVER(drive)->error(drive, __FUNCTION__, stat); + + /* + * Complete previously submitted bios (if any). + * Status was already verifyied. */ - if (!rq->current_nr_sectors) - if (!DRIVER(drive)->end_request(drive, 1, 0)) + while (rq->bio != rq->cbio) + if (!DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio))) return ide_stopped; - if ((rq->current_nr_sectors==1) ^ (stat & DRQ_STAT)) { - rq = HWGROUP(drive)->rq; - pBuf = task_map_rq(rq, &flags); - DTF("write: %p, rq->current_nr_sectors: %d\n", - pBuf, (int) rq->current_nr_sectors); - taskfile_output_data(drive, pBuf, SECTOR_WORDS); - task_unmap_rq(rq, pBuf, &flags); - rq->errors = 0; - rq->current_nr_sectors--; + /* Complete rq->buffer based request (ioctls). */ + if (!rq->bio && !rq->nr_sectors) { + ide_end_drive_cmd(drive, stat, HWIF(drive)->INB(IDE_ERROR_REG)); + return ide_stopped; } - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); + + /* Still data left to transfer. */ + ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); + + rq->errors = 0; + task_sectors(drive, rq, 1, IDE_PIO_OUT); + return ide_started; } EXPORT_SYMBOL(task_out_intr); -#undef ALTERNATE_STATE_DIAGRAM_MULTI_OUT - -ide_startstop_t pre_task_mulout_intr (ide_drive_t *drive, struct request *rq) +ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) { -#ifdef ALTERNATE_STATE_DIAGRAM_MULTI_OUT - ide_hwif_t *hwif = HWIF(drive); - char *pBuf = NULL; - unsigned int nsect = 0, msect = drive->mult_count; - u8 stat; - unsigned long flags; -#endif /* ALTERNATE_STATE_DIAGRAM_MULTI_OUT */ - - ide_task_t *args = rq->special; ide_startstop_t startstop; -#if 0 - /* - * assign private copy for multi-write - */ - memcpy(&HWGROUP(drive)->wrq, rq, sizeof(struct request)); -#endif - if (ide_wait_stat(&startstop, drive, DATA_READY, - drive->bad_wstat, WAIT_DRQ)) { - printk(KERN_ERR "%s: no DRQ after issuing %s\n", - drive->name, - drive->addressing ? "MULTWRITE_EXT" : "MULTWRITE"); + drive->bad_wstat, WAIT_DRQ)) { + printk(KERN_ERR "%s: no DRQ after issuing WRITE%s\n", + drive->name, drive->addressing ? "_EXT" : ""); return startstop; } -#ifdef ALTERNATE_STATE_DIAGRAM_MULTI_OUT - do { - nsect = rq->current_nr_sectors; - if (nsect > msect) - nsect = msect; - pBuf = task_map_rq(rq, &flags); - DTF("Pre-Multiwrite: %p, nsect: %d, msect: %d, " \ - "rq->current_nr_sectors: %ld\n", - pBuf, nsect, msect, rq->current_nr_sectors); - msect -= nsect; - taskfile_output_data(drive, pBuf, nsect * SECTOR_WORDS); - task_unmap_rq(rq, pBuf, &flags); - rq->current_nr_sectors -= nsect; - if (!rq->current_nr_sectors) { - if (!DRIVER(drive)->end_request(drive, 1, 0)) - if (!rq->bio) { - stat = hwif->INB(IDE_STATUS_REG); - return ide_stopped; - } - } - } while (msect); - rq->errors = 0; - return ide_started; -#else /* ! ALTERNATE_STATE_DIAGRAM_MULTI_OUT */ - if (!(drive_is_ready(drive))) { - int i; - for (i=0; i<100; i++) { - if (drive_is_ready(drive)) - break; - } - } - - /* - * WARNING :: if the drive as not acked good status we may not - * move the DATA-TRANSFER T-Bar as BSY != 0. <andre@linux-ide.org> - */ - return args->handler(drive); -#endif /* ALTERNATE_STATE_DIAGRAM_MULTI_OUT */ + return task_out_intr(drive); } - -EXPORT_SYMBOL(pre_task_mulout_intr); +EXPORT_SYMBOL(pre_task_out_intr); /* - * FIXME before enabling in 2.4 ... DATA integrity issue upon error. - */ -/* - * Handler for command write multiple - * Called directly from execute_drive_cmd for the first bunch of sectors, - * afterwards only by the ISR + * Handler for command with PIO data-out phase (Write Multiple). */ ide_startstop_t task_mulout_intr (ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - u8 stat = hwif->INB(IDE_STATUS_REG); - struct request *rq = HWGROUP(drive)->rq; - char *pBuf = NULL; - ide_startstop_t startstop = ide_stopped; - unsigned int msect = drive->mult_count; + struct request *rq = HWGROUP(drive)->rq; + unsigned int msect = drive->mult_count; unsigned int nsect; - unsigned long flags; + u8 stat; - /* - * (ks/hs): Handle last IRQ on multi-sector transfer, - * occurs after all data was sent in this chunk - */ - if (rq->current_nr_sectors == 0) { - if (stat & (ERR_STAT|DRQ_STAT)) { - if (!rq->bio) { - rq->current_nr_sectors += drive->mult_count; - /* - * NOTE: could rewind beyond beginning :-/ - */ - } else { - printk(KERN_ERR "%s: MULTI-WRITE assume all data " \ - "transfered is bad status=0x%02x\n", - drive->name, stat); - } - return DRIVER(drive)->error(drive, "task_mulout_intr", stat); + stat = HWIF(drive)->INB(IDE_STATUS_REG); + if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) { + if ((stat & (ERR_STAT | DRQ_STAT)) || + ((stat & WRERR_STAT) && !drive->nowerr)) + return DRIVER(drive)->error(drive, __FUNCTION__, stat); + if (stat & BUSY_STAT) { + /* Not ready yet, so wait for another IRQ. */ + ide_set_handler(drive, &task_mulout_intr, WAIT_WORSTCASE, NULL); + return ide_started; } - if (!rq->bio) - DRIVER(drive)->end_request(drive, 1, 0); - return startstop; } - /* - * DON'T be lazy code the above and below togather !!! + + /* Deal with unexpected ATA data phase. */ + if ((!(stat & DATA_READY) && rq->nr_sectors) || + ((stat & DATA_READY) && !rq->nr_sectors)) + return DRIVER(drive)->error(drive, __FUNCTION__, stat); + + /* + * Complete previously submitted bios (if any). + * Status was already verifyied. */ - if (!OK_STAT(stat,DATA_READY,BAD_R_STAT)) { - if (stat & (ERR_STAT|DRQ_STAT)) { - if (!rq->bio) { - rq->current_nr_sectors += drive->mult_count; - /* - * NOTE: could rewind beyond beginning :-/ - */ - } else { - printk("%s: MULTI-WRITE assume all data " \ - "transfered is bad status=0x%02x\n", - drive->name, stat); - } - return DRIVER(drive)->error(drive, "task_mulout_intr", stat); - } - /* no data yet, so wait for another interrupt */ - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_mulout_intr, WAIT_WORSTCASE, NULL); - return ide_started; + while (rq->bio != rq->cbio) + if (!DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio))) + return ide_stopped; + /* Complete rq->buffer based request (ioctls). */ + if (!rq->bio && !rq->nr_sectors) { + ide_end_drive_cmd(drive, stat, HWIF(drive)->INB(IDE_ERROR_REG)); + return ide_stopped; } -#ifndef ALTERNATE_STATE_DIAGRAM_MULTI_OUT - if (HWGROUP(drive)->handler != NULL) { - unsigned long lflags; - spin_lock_irqsave(&ide_lock, lflags); - HWGROUP(drive)->handler = NULL; - del_timer(&HWGROUP(drive)->timer); - spin_unlock_irqrestore(&ide_lock, lflags); - } -#endif /* ALTERNATE_STATE_DIAGRAM_MULTI_OUT */ + /* Still data left to transfer. */ + ide_set_handler(drive, &task_mulout_intr, WAIT_WORSTCASE, NULL); + rq->errors = 0; do { nsect = rq->current_nr_sectors; if (nsect > msect) nsect = msect; - pBuf = task_map_rq(rq, &flags); - DTF("Multiwrite: %p, nsect: %d, msect: %d, " \ - "rq->current_nr_sectors: %ld\n", - pBuf, nsect, msect, rq->current_nr_sectors); - msect -= nsect; - taskfile_output_data(drive, pBuf, nsect * SECTOR_WORDS); - task_unmap_rq(rq, pBuf, &flags); - rq->current_nr_sectors -= nsect; - /* - * FIXME :: We really can not legally get a new page/bh - * regardless, if this is the end of our segment. - * BH walking or segment can only be updated after we - * have a good hwif->INB(IDE_STATUS_REG); return. - */ - if (!rq->current_nr_sectors) { - if (!DRIVER(drive)->end_request(drive, 1, 0)) - if (!rq->bio) - return ide_stopped; - } + + task_sectors(drive, rq, nsect, IDE_PIO_OUT); + + if (!rq->nr_sectors) + msect = 0; + else + msect -= nsect; } while (msect); - rq->errors = 0; - if (HWGROUP(drive)->handler == NULL) - ide_set_handler(drive, &task_mulout_intr, WAIT_WORSTCASE, NULL); + return ide_started; } - EXPORT_SYMBOL(task_mulout_intr); +ide_startstop_t pre_task_mulout_intr (ide_drive_t *drive, struct request *rq) +{ + ide_startstop_t startstop; + + if (ide_wait_stat(&startstop, drive, DATA_READY, + drive->bad_wstat, WAIT_DRQ)) { + printk(KERN_ERR "%s: no DRQ after issuing MULTWRITE%s\n", + drive->name, drive->addressing ? "_EXT" : ""); + return startstop; + } + + return task_mulout_intr(drive); +} +EXPORT_SYMBOL(pre_task_mulout_intr); + /* Called by internal to feature out type of command being called */ //ide_pre_handler_t * ide_pre_handler_parser (task_struct_t *taskfile, hob_struct_t *hobfile) ide_pre_handler_t * ide_pre_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile) @@ -1092,11 +960,12 @@ int ide_diag_taskfile (ide_drive_t *driv */ if (args->command_type != IDE_DRIVE_TASK_NO_DATA) { if (data_size == 0) - rq.current_nr_sectors = rq.nr_sectors = (args->hobRegister[IDE_NSECTOR_OFFSET_HOB] << 8) | args->tfRegister[IDE_NSECTOR_OFFSET]; - /* rq.hard_cur_sectors */ + rq.nr_sectors = (args->hobRegister[IDE_NSECTOR_OFFSET_HOB] << 8) | args->tfRegister[IDE_NSECTOR_OFFSET]; else - rq.current_nr_sectors = rq.nr_sectors = data_size / SECTOR_SIZE; - /* rq.hard_cur_sectors */ + rq.nr_sectors = data_size / SECTOR_SIZE; + + rq.hard_nr_sectors = rq.nr_sectors; + rq.hard_cur_sectors = rq.current_nr_sectors = rq.nr_sectors; } if (args->tf_out_flags.all == 0) { diff -puN drivers/ide/legacy/pdc4030.c~ide-taskfile-io-switch drivers/ide/legacy/pdc4030.c --- linux-2.5.70-bk11/drivers/ide/legacy/pdc4030.c~ide-taskfile-io-switch Sat Jun 7 22:33:38 2003 +++ linux-2.5.70-bk11-root/drivers/ide/legacy/pdc4030.c Sun Jun 8 00:54:43 2003 @@ -94,7 +94,7 @@ #include "pdc4030.h" -static ide_startstop_t promise_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block); +static ide_startstop_t promise_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block); /* * promise_selectproc() is invoked by ide.c @@ -408,67 +408,44 @@ module_exit(pdc4030_mod_exit); */ static ide_startstop_t promise_read_intr (ide_drive_t *drive) { - int total_remaining; unsigned int sectors_left, sectors_avail, nsect; - struct request *rq; + struct request *rq = HWGROUP(drive)->rq; ata_status_t status; -#ifdef CONFIG_IDE_TASKFILE_IO - unsigned long flags; - char *to; -#endif /* CONFIG_IDE_TASKFILE_IO */ status.all = HWIF(drive)->INB(IDE_STATUS_REG); if (!OK_STAT(status.all, DATA_READY, BAD_R_STAT)) - return DRIVER(drive)->error(drive, - "promise_read_intr", status.all); + return DRIVER(drive)->error(drive, __FUNCTION__, status.all); read_again: do { sectors_left = HWIF(drive)->INB(IDE_NSECTOR_REG); HWIF(drive)->INB(IDE_SECTOR_REG); } while (HWIF(drive)->INB(IDE_NSECTOR_REG) != sectors_left); - rq = HWGROUP(drive)->rq; sectors_avail = rq->nr_sectors - sectors_left; if (!sectors_avail) goto read_again; read_next: - rq = HWGROUP(drive)->rq; nsect = rq->current_nr_sectors; if (nsect > sectors_avail) nsect = sectors_avail; sectors_avail -= nsect; -#ifdef CONFIG_IDE_TASKFILE_IO - to = ide_map_buffer(rq, &flags); - HWIF(drive)->ata_input_data(drive, to, nsect * SECTOR_WORDS); -#else /* !CONFIG_IDE_TASKFILE_IO */ - HWIF(drive)->ata_input_data(drive, rq->buffer, nsect * SECTOR_WORDS); -#endif /* CONFIG_IDE_TASKFILE_IO */ #ifdef DEBUG_READ - printk(KERN_DEBUG "%s: promise_read: sectors(%ld-%ld), " - "buf=0x%08lx, rem=%ld\n", drive->name, (long)rq->sector, - (long)rq->sector+nsect-1, -#ifdef CONFIG_IDE_TASKFILE_IO - (unsigned long) to, -#else /* !CONFIG_IDE_TASKFILE_IO */ - (unsigned long) rq->buffer, -#endif /* CONFIG_IDE_TASKFILE_IO */ - rq->nr_sectors-nsect); + printk(KERN_DEBUG "%s: %s: sectors(%lu-%lu), rem=%lu\n", + drive->name, __FUNCTION__, + (unsigned long)rq->sector, + (unsigned long)rq->sector + nsect - 1, + (unsigned long)rq->nr_sectors - nsect); #endif /* DEBUG_READ */ -#ifdef CONFIG_IDE_TASKFILE_IO - ide_unmap_buffer(to, &flags); -#else /* !CONFIG_IDE_TASKFILE_IO */ - rq->buffer += nsect<<9; -#endif /* CONFIG_IDE_TASKFILE_IO */ - rq->sector += nsect; - rq->errors = 0; - rq->nr_sectors -= nsect; - total_remaining = rq->nr_sectors; - if ((rq->current_nr_sectors -= nsect) <= 0) { - DRIVER(drive)->end_request(drive, 1, 0); - } + task_sectors(drive, rq, nsect, IDE_PIO_IN); + + /* FIXME: can we check status after transfer on pdc4030? */ + /* Complete previously submitted bios. */ + while (rq->bio != rq->cbio) + if (!DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio))) + return ide_stopped; /* * Now the data has been read in, do the following: * @@ -480,7 +457,7 @@ read_next: * else if BUSY is asserted, we are going to get an interrupt, so * set the handler for the interrupt and just return */ - if (total_remaining > 0) { + if (rq->nr_sectors > 0) { if (sectors_avail) goto read_next; status.all = HWIF(drive)->INB(IDE_STATUS_REG); @@ -519,7 +496,6 @@ static ide_startstop_t promise_complete_ { ide_hwgroup_t *hwgroup = HWGROUP(drive); struct request *rq = hwgroup->rq; - int i; if ((HWIF(drive)->INB(IDE_STATUS_REG)) & BUSY_STAT) { if (time_before(jiffies, hwgroup->poll_timeout)) { @@ -542,85 +518,35 @@ static ide_startstop_t promise_complete_ #ifdef DEBUG_WRITE printk(KERN_DEBUG "%s: Write complete - end_request\n", drive->name); #endif /* DEBUG_WRITE */ - for (i = rq->nr_sectors; i > 0; ) { - i -= rq->current_nr_sectors; - DRIVER(drive)->end_request(drive, 1, 0); - } + + /* Complete previously submitted bios. */ + while (rq->bio != rq->cbio) + (void) DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio)); return ide_stopped; } /* * promise_multwrite() transfers a block of up to mcount sectors of data * to a drive as part of a disk multiple-sector write operation. - * - * Returns 0 on success. - * - * Note that we may be called from two contexts - the do_rw_disk context - * and IRQ context. The IRQ can happen any time after we've output the - * full "mcount" number of sectors, so we must make sure we update the - * state _before_ we output the final part of the data! */ -int promise_multwrite (ide_drive_t *drive, unsigned int mcount) +static void promise_multwrite (ide_drive_t *drive, unsigned int msect) { - ide_hwgroup_t *hwgroup = HWGROUP(drive); - struct request *rq = &hwgroup->wrq; + struct request* rq = HWGROUP(drive)->rq; + unsigned int nsect; + rq->errors = 0; do { - char *buffer; - int nsect = rq->current_nr_sectors; -#ifdef CONFIG_IDE_TASKFILE_IO - unsigned long flags; -#endif /* CONFIG_IDE_TASKFILE_IO */ - - if (nsect > mcount) - nsect = mcount; - mcount -= nsect; -#ifdef CONFIG_IDE_TASKFILE_IO - buffer = ide_map_buffer(rq, &flags); - rq->sector += nsect; -#else /* !CONFIG_IDE_TASKFILE_IO */ - buffer = rq->buffer; - - rq->sector += nsect; - rq->buffer += nsect << 9; -#endif /* CONFIG_IDE_TASKFILE_IO */ - rq->nr_sectors -= nsect; - rq->current_nr_sectors -= nsect; - - /* Do we move to the next bh after this? */ - if (!rq->current_nr_sectors) { - struct bio *bio = rq->bio; - - /* - * only move to next bio, when we have processed - * all bvecs in this one. - */ - if (++bio->bi_idx >= bio->bi_vcnt) { - bio->bi_idx = 0; - bio = bio->bi_next; - } - - /* end early early we ran out of requests */ - if (!bio) { - mcount = 0; - } else { - rq->bio = bio; - rq->current_nr_sectors = bio_iovec(bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - } - } - - /* - * Ok, we're all setup for the interrupt - * re-entering us on the last transfer. - */ - taskfile_output_data(drive, buffer, nsect<<7); -#ifdef CONFIG_IDE_TASKFILE_IO - ide_unmap_buffer(buffer, &flags); -#endif /* CONFIG_IDE_TASKFILE_IO */ - } while (mcount); - - return 0; + nsect = rq->current_nr_sectors; + if (nsect > msect) + nsect = msect; + + task_sectors(drive, rq, nsect, IDE_PIO_OUT); + + if (!rq->nr_sectors) + msect = 0; + else + msect -= nsect; + } while (msect); } /* @@ -629,6 +555,7 @@ int promise_multwrite (ide_drive_t *driv static ide_startstop_t promise_write_pollfunc (ide_drive_t *drive) { ide_hwgroup_t *hwgroup = HWGROUP(drive); + struct request *rq = hwgroup->rq; if (HWIF(drive)->INB(IDE_NSECTOR_REG) != 0) { if (time_before(jiffies, hwgroup->poll_timeout)) { @@ -646,6 +573,10 @@ static ide_startstop_t promise_write_pol HWIF(drive)->INB(IDE_STATUS_REG)); } + /* Complete previously submitted bios. */ + while (rq->bio != rq->cbio) + (void) DRIVER(drive)->end_request(drive, 1, bio_sectors(rq->bio)); + /* * Now write out last 4 sectors and poll for not BUSY */ @@ -671,12 +602,13 @@ static ide_startstop_t promise_write_pol static ide_startstop_t promise_write (ide_drive_t *drive) { ide_hwgroup_t *hwgroup = HWGROUP(drive); - struct request *rq = &hwgroup->wrq; + struct request *rq = hwgroup->rq; #ifdef DEBUG_WRITE - printk(KERN_DEBUG "%s: promise_write: sectors(%ld-%ld), " - "buffer=%p\n", drive->name, (long)rq->sector, - (long)rq->sector + rq->nr_sectors - 1, rq->buffer); + printk(KERN_DEBUG "%s: %s: sectors(%lu-%lu)\n", + drive->name, __FUNCTION__, + (unsigned long)rq->sector, + (unsigned long)rq->sector + rq->nr_sectors - 1); #endif /* DEBUG_WRITE */ /* @@ -684,8 +616,7 @@ static ide_startstop_t promise_write (id * the polling strategy as defined above. */ if (rq->nr_sectors > 4) { - if (promise_multwrite(drive, rq->nr_sectors - 4)) - return ide_stopped; + promise_multwrite(drive, rq->nr_sectors - 4); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; if (hwgroup->handler != NULL) /* paranoia check */ BUG(); @@ -696,8 +627,7 @@ static ide_startstop_t promise_write (id * There are 4 or fewer sectors to transfer, do them all in one go * and wait for NOT BUSY. */ - if (promise_multwrite(drive, rq->nr_sectors)) - return ide_stopped; + promise_multwrite(drive, rq->nr_sectors); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; if (hwgroup->handler != NULL) BUG(); @@ -720,26 +650,14 @@ static ide_startstop_t promise_write (id * already set up. It issues a READ or WRITE command to the Promise * controller, assuming LBA has been used to set up the block number. */ -#ifndef CONFIG_IDE_TASKFILE_IO -ide_startstop_t do_pdc4030_io (ide_drive_t *drive, struct request *rq) -{ -#else /* CONFIG_IDE_TASKFILE_IO */ -ide_startstop_t do_pdc4030_io (ide_drive_t *drive, ide_task_t *task) +static ide_startstop_t do_pdc4030_io (ide_drive_t *drive, ide_task_t *task) { struct request *rq = HWGROUP(drive)->rq; task_struct_t *taskfile = (task_struct_t *) task->tfRegister; -#endif /* CONFIG_IDE_TASKFILE_IO */ ide_startstop_t startstop; unsigned long timeout; u8 stat = 0; - if (!blk_fs_request(rq)) { - blk_dump_rq_flags(rq, "do_pdc4030_io - bad command"); - DRIVER(drive)->end_request(drive, 0, 0); - return ide_stopped; - } - -#ifdef CONFIG_IDE_TASKFILE_IO if (IDE_CONTROL_REG) HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ SELECT_MASK(drive, 0); @@ -752,12 +670,8 @@ ide_startstop_t do_pdc4030_io (ide_drive HWIF(drive)->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); HWIF(drive)->OUTB(taskfile->device_head, IDE_SELECT_REG); HWIF(drive)->OUTB(taskfile->command, IDE_COMMAND_REG); -#endif /* CONFIG_IDE_TASKFILE_IO */ if (rq_data_dir(rq) == READ) { -#ifndef CONFIG_IDE_TASKFILE_IO - HWIF(drive)->OUTB(PROMISE_READ, IDE_COMMAND_REG); -#endif /* CONFIG_IDE_TASKFILE_IO */ /* * The card's behaviour is odd at this point. If the data is * available, DRQ will be true, and no interrupt will be @@ -793,9 +707,6 @@ ide_startstop_t do_pdc4030_io (ide_drive "waiting - Odd!\n", drive->name); return ide_stopped; } else { -#ifndef CONFIG_IDE_TASKFILE_IO - HWIF(drive)->OUTB(PROMISE_WRITE, IDE_COMMAND_REG); -#endif /* CONFIG_IDE_TASKFILE_IO */ if (ide_wait_stat(&startstop, drive, DATA_READY, drive->bad_wstat, WAIT_DRQ)) { printk(KERN_ERR "%s: no DRQ after issuing " @@ -804,12 +715,11 @@ ide_startstop_t do_pdc4030_io (ide_drive } if (!drive->unmask) local_irq_disable(); - HWGROUP(drive)->wrq = *rq; /* scratchpad */ return promise_write(drive); } } -static ide_startstop_t promise_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) +static ide_startstop_t promise_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) { /* The four drives on the two logical (one physical) interfaces are distinguished by writing the drive number (0-3) to the @@ -817,33 +727,22 @@ static ide_startstop_t promise_rw_disk ( FIXME: Is promise_selectproc now redundant?? */ int drive_number = (HWIF(drive)->channel << 1) + drive->select.b.unit; -#ifndef CONFIG_IDE_TASKFILE_IO - ide_hwif_t *hwif = HWIF(drive); + struct hd_drive_task_hdr taskfile; + ide_task_t args; BUG_ON(rq->nr_sectors > 127); - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); + if (!blk_fs_request(rq)) { + blk_dump_rq_flags(rq, "promise_rw_disk - bad command"); + DRIVER(drive)->end_request(drive, 0, 0); + return ide_stopped; + } #ifdef DEBUG - printk("%s: %sing: LBAsect=%ld, sectors=%ld, " - "buffer=0x%08lx\n", drive->name, - (rq->cmd==READ)?"read":"writ", block, - rq->nr_sectors, (unsigned long) rq->buffer); + printk(KERN_DEBUG "%s: %sing: LBAsect=%lu, sectors=%lu\n", + drive->name, rq_data_dir(rq) ? "writ" : "read", + block, rq->nr_sectors); #endif - hwif->OUTB(drive_number, IDE_FEATURE_REG); - hwif->OUTB(rq->nr_sectors, IDE_NSECTOR_REG); - hwif->OUTB(block,IDE_SECTOR_REG); - hwif->OUTB(block>>=8,IDE_LCYL_REG); - hwif->OUTB(block>>=8,IDE_HCYL_REG); - hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); - - return do_pdc4030_io(drive, rq); - -#else /* CONFIG_IDE_TASKFILE_IO */ - - struct hd_drive_task_hdr taskfile; - ide_task_t args; memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr)); @@ -867,5 +766,4 @@ static ide_startstop_t promise_rw_disk ( rq->special = (ide_task_t *)&args; return do_pdc4030_io(drive, &args); -#endif /* CONFIG_IDE_TASKFILE_IO */ } diff -puN include/linux/blkdev.h~ide-taskfile-io-switch include/linux/blkdev.h --- linux-2.5.70-bk11/include/linux/blkdev.h~ide-taskfile-io-switch Sat Jun 7 22:33:38 2003 +++ linux-2.5.70-bk11-root/include/linux/blkdev.h Sat Jun 7 22:33:38 2003 @@ -457,6 +457,7 @@ extern void blk_queue_invalidate_tags(re extern void blk_congestion_wait(int rw, long timeout); extern void blk_rq_bio_prep(request_queue_t *, struct request *, struct bio *); +extern void blk_rq_prep_restart(struct request *); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 diff -puN include/linux/ide.h~ide-taskfile-io-switch include/linux/ide.h --- linux-2.5.70-bk11/include/linux/ide.h~ide-taskfile-io-switch Sat Jun 7 22:33:38 2003 +++ linux-2.5.70-bk11-root/include/linux/ide.h Sun Jun 8 01:58:54 2003 @@ -817,33 +817,25 @@ typedef struct ide_dma_ops_s { * * temporarily mapping a (possible) highmem bio for PIO transfer */ -#define ide_rq_offset(rq) \ - (((rq)->hard_cur_sectors - (rq)->current_nr_sectors) << 9) -/* - * taskfiles really should use hard_cur_sectors as well! - */ -#define task_rq_offset(rq) \ - (((rq)->nr_sectors - (rq)->current_nr_sectors) * SECTOR_SIZE) - -static inline void *ide_map_buffer(struct request *rq, unsigned long *flags) +static inline void *task_map_rq(struct request *rq, unsigned long *flags) { /* * fs request */ - if (rq->bio) - return bio_kmap_irq(rq->bio, flags) + ide_rq_offset(rq); + if (rq->cbio) + return rq_map_buffer(rq, flags); /* * task request */ - return rq->buffer + task_rq_offset(rq); + return rq->buffer + blk_rq_offset(rq); } -static inline void ide_unmap_buffer(struct request *rq, char *buffer, unsigned long *flags) +static inline void task_unmap_rq(struct request *rq, char *buffer, unsigned long *flags) { - if (rq->bio) - bio_kunmap_irq(buffer, flags); + if (rq->cbio) + rq_unmap_buffer(buffer, flags); } #define IDE_CHIPSET_PCI_MASK \ @@ -1418,6 +1410,31 @@ extern void atapi_output_bytes(ide_drive extern void taskfile_input_data(ide_drive_t *, void *, u32); extern void taskfile_output_data(ide_drive_t *, void *, u32); +#define IDE_PIO_IN 0 +#define IDE_PIO_OUT 1 + +static inline void task_sectors(ide_drive_t *drive, struct request *rq, + unsigned nsect, int rw) +{ + unsigned long flags; + char *buf; + + buf = task_map_rq(rq, &flags); + + /* + * IRQ can happen instantly after reading/writing + * last sector of the datablock. + */ + process_that_request_first(rq, nsect); + + if (rw == IDE_PIO_OUT) + taskfile_output_data(drive, buf, nsect * SECTOR_WORDS); + else + taskfile_input_data(drive, buf, nsect * SECTOR_WORDS); + + task_unmap_rq(rq, buf, &flags); +} + extern int drive_is_ready(ide_drive_t *); extern int wait_for_ready(ide_drive_t *, int /* timeout */);
_
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 07 2003 - 22:00:34 EST