Re: [BUG] ieee1394 sbp2 driver is broken for kernel >= 2.4.21-rc2

From: Matthew Dharm (mdharm-kernel@one-eyed-alien.net)
Date: Tue Jun 03 2003 - 15:25:04 EST


I know jumping in the middle of a conversation is bad, but....

In conversations with the SBP2 folks, they indicated to me that the way
they do hotplugging is very different from the way usb-storage does it.
The end result (I'm told) is that invoking a scan from userspace is often
needed for SBP2 but never for usb-storage.

So, comparing the two is really pointless.

Matt

On Tue, Jun 03, 2003 at 10:20:19PM +0200, Jocelyn Mayer wrote:
> On Tue, 2003-06-03 at 20:54, Ben Collins wrote:
> > > First, I never trust hotplug or other tools like this:
> > > I do all insmod by hand, so I know all drivers have been loaded.
> > > What is hotplug supposed to do (but wasn't in previous driver
> > > version...) ?
> >
> > I didn't say CONFIG_HOTPLUG, I said hotplug. Basically SCSI in 2.4 will
> > not let recognize devices that were not present when the scsi-host was
> > initially registered with the SCSI stack. You have to run
> > rescan-scsi-bus.sh (or manually send the add/remove commands via
> > procfs).
> >
> > Please read the linux-kernel and/or linux1394-devel mailing list
> > archives. I really hate dredging this all up again.
>
> Well, I did understand well hotplug...
> I did read what's said about SBP2 on linux1394.org, BUT:
>
> please read my latest mail, I did some try with the 2.4.21-rc1 ieee1394
> stack, without /sbin/hotplug, and it worked.
> I have neither rescan-scsi-bus.sh, nor scsiadd anywhere on this machine.
> So, I'm sure that no user-space tool have been called by the kernel.
>
> - I NEVER need to do an "echo ... > /proc/scsi/scsi" to see the device
> (I tell again that I never use automatic tools to do this kind of
> low level stuffs).
> - I NEVER have to do this to see an USB mass-storage device:
> I'm *REALLY* sure of this, as I wrote a very simple hotplug
> and automounter for some embedded hardware which uses USB mass
> storage devices. So, I don't see why SBP2 should need this...
>
> - Please take a look at this session:
> First, I reboot the Ibook:
>
> root:~$ reboot
> root:~$
> Broadcast message from root (pts/0) (Tue Jun 3 22:06:13 2003):
>
> The system is going down for reboot NOW!
> Connection to mac closed by remote host.
> Connection to mac closed.
> jma ~ > ssh jocelyn@mac
> jocelyn@mac's password:
> jocelyn:~$ su -
> Password:
> root:~$ ls -l /bin/hotplug
> ls: /bin/hotplug: No such file or directory
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ cat
> /proc/sys/kernel/hotplug
> /sbin/hotplug
> root:~$ cd /lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394/
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ insmod
> ./ieee1394.o
>
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ insmod
> ./cmp.o
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ cat
> /proc/scsi/scsi
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: SONY Model: CD-RW CRX800E Rev: 1.3p
> Type: CD-ROM ANSI SCSI revision: 02
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ insmod
> ./ohci1394.o
>
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ insmod
> ./amdtp.o
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ insmod
> ../scsi/sd_m
> od.o
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ insmod
> ./sbp2.o
> root:/lib/modules/2.4.21-rc6-compat/kernel/drivers/ieee1394$ cat
> /proc/scsi/scsi
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: SONY Model: CD-RW CRX800E Rev: 1.3p
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
> Vendor: Maxtor 6 Model: Y080L0 Rev: YAR4
> Type: Direct-Access ANSI SCSI revision: 06
>
>
> So I NEVER write anything to /proc/scsi/scsi,
> I got NO /sbin/hotplug, I use only insmod,
> so I can have no side-effect due to modprobe usage,
> and it works PERFECTLY on the Ibook,
> using the 2.4.21-rc1 ieee1394 stack.
>
> So, I'm sorry, but I keep thinking the new driver is buggy:
> what used to work and doesn't...
>
>
> Regards.
>
> --
> Jocelyn Mayer <jma@netgem.com>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-- 
Matthew Dharm                              Home: mdharm-usb@one-eyed-alien.net 
Maintainer, Linux USB Mass Storage Driver

Would you mind not using our Web server? We're trying to have a game of Quake here. -- Greg User Friendly, 5/11/1998


- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Jun 07 2003 - 22:00:21 EST