Please apply.
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.1113.1.1 -> 1.1113.1.2
# drivers/video/pvr2fb.c 1.14 -> 1.15
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/05/14 jsimmons@maxwell.earthlink.net 1.1113.1.2
# [PVR2 FBDEV] Port of the Dreamcast Frambuffer to the new api.
# --------------------------------------------
#
diff -Nru a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
--- a/drivers/video/pvr2fb.c Sat May 17 13:27:54 2003
+++ b/drivers/video/pvr2fb.c Sat May 17 13:27:54 2003
@@ -4,7 +4,7 @@
* Dreamcast.
*
* Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2001 Paul Mundt <lethal@chaoticdreams.org>
+ * Copyright (c) 2001, 2002, 2003 Paul Mundt <lethal@linux-sh.org>
*
* This file is part of the LinuxDC project (linuxdc.sourceforge.net).
*
@@ -12,14 +12,15 @@
/*
* This driver is mostly based on the excellent amifb and vfb sources. It uses
- * an odd scheme for converting hardware values to/from framebuffer values, here are
- * some hacked-up formulas:
+ * an odd scheme for converting hardware values to/from framebuffer values,
+ * here are some hacked-up formulas:
*
- * The Dreamcast has screen offsets from each side of its four borders and the start
- * offsets of the display window. I used these values to calculate 'pseudo' values
- * (think of them as placeholders) for the fb video mode, so that when it came time
- * to convert these values back into their hardware values, I could just add mode-
- * specific offsets to get the correct mode settings:
+ * The Dreamcast has screen offsets from each side of its four borders and
+ * the start offsets of the display window. I used these values to calculate
+ * 'pseudo' values (think of them as placeholders) for the fb video mode, so
+ * that when it came time to convert these values back into their hardware
+ * values, I could just add mode- specific offsets to get the correct mode
+ * settings:
*
* left_margin = diwstart_h - borderstart_h;
* right_margin = borderstop_h - (diwstart_h + xres);
@@ -29,9 +30,9 @@
* hsync_len = borderstart_h + (hsync_total - borderstop_h);
* vsync_len = borderstart_v + (vsync_total - borderstop_v);
*
- * Then, when it's time to convert back to hardware settings, the only constants
- * are the borderstart_* offsets, all other values are derived from the fb video
- * mode:
+ * Then, when it's time to convert back to hardware settings, the only
+ * constants are the borderstart_* offsets, all other values are derived from
+ * the fb video mode:
*
* // PAL
* borderstart_h = 116;
@@ -57,7 +58,6 @@
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
-#include <linux/console.h>
#ifdef CONFIG_SH_DREAMCAST
#include <asm/io.h>
@@ -66,14 +66,9 @@
#endif
#ifdef CONFIG_MTRR
- #include <asm/mtrr.h>
+#include <asm/mtrr.h>
#endif
-#include <video/fbcon.h>
-#include <video/fbcon-cfb16.h>
-#include <video/fbcon-cfb24.h>
-#include <video/fbcon-cfb32.h>
-
#ifdef CONFIG_FB_PVR2_DEBUG
# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
#else
@@ -124,16 +119,6 @@
*/
static struct pvr2fb_par {
-
- int xres;
- int yres;
- int vxres;
- int vyres;
- int xoffset;
- int yoffset;
- u_short bpp;
-
- u_long pixclock;
u_short hsync_total; /* Clocks/line */
u_short vsync_total; /* Lines/field */
u_short borderstart_h;
@@ -144,38 +129,37 @@
u_short diwstart_v; /* Vertical offset of the display field, for
interlaced modes, this is the long field */
u_long disp_start; /* Address of image within VRAM */
-
- u_long next_line; /* Modulo for next line */
-
u_char is_interlaced; /* Is the display interlaced? */
u_char is_doublescan; /* Are scanlines output twice? (doublescan) */
u_char is_lowres; /* Is horizontal pixel-doubling enabled? */
+} *currentpar;
- u_long bordercolor; /* RGB888 format border color */
-
- u_long vmode;
-
-} currentpar;
-
-static int currbpp;
-static struct display disp;
-static struct fb_info fb_info;
+static struct fb_info *fb_info;
static int pvr2fb_inverse = 0;
-static struct { u_short red, green, blue, alpha; } palette[256];
-static union {
-#ifdef FBCON_HAS_CFB16
- u16 cfb16[16];
-#endif
-#ifdef FBCON_HAS_CFB24
- u32 cfb24[16];
-#endif
-#ifdef FBCON_HAS_CFB32
- u32 cfb32[16];
-#endif
-} fbcon_cmap;
+static struct fb_fix_screeninfo pvr2_fix __initdata = {
+ .id = "NEC PowerVR2",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .ypanstep = 1,
+ .ywrapstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
-static char pvr2fb_name[16] = "NEC PowerVR2";
+static struct fb_var_screeninfo pvr2_var __initdata = {
+ .xres = 640,
+ .yres = 480,
+ .xres_virtual = 640,
+ .yres_virtual = 480,
+ .bits_per_pixel =16,
+ .red = { 11, 5, 0 },
+ .green = { 5, 6, 0 },
+ .blue = { 0, 5, 0 },
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
#define VIDEOMEMSIZE (8*1024*1024)
static u_long videomemory = 0xa5000000, videomemorysize = VIDEOMEMSIZE;
@@ -187,10 +171,12 @@
static int mtrr_handle;
#endif
+static int nopan = 0;
+static int nowrap = 1;
+
/*
* We do all updating, blanking, etc. during the vertical retrace period
*/
-
static u_short do_vmode_full = 0; /* Change the video mode */
static u_short do_vmode_pan = 0; /* Update the video mode */
static short do_blank = 0; /* (Un)Blank the screen */
@@ -201,50 +187,15 @@
int pvr2fb_setup(char*);
-static int pvr2fb_get_fix(struct fb_fix_screeninfo *fix, int con,
- struct fb_info *info);
-static int pvr2fb_get_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info);
-static int pvr2fb_set_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info);
-static int pvr2fb_pan_display(struct fb_var_screeninfo *var, int con,
- struct fb_info *info);
-static int pvr2fb_get_cmap(struct fb_cmap *cmap, int kspc, int con,
- struct fb_info *info);
-static int pvr2fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
- struct fb_info *info);
static int pvr2fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info);
static int pvr2fb_blank(int blank, struct fb_info *info);
-
- /*
- * Interface to the low level console driver
- */
-
-static int pvr2fbcon_switch(int con, struct fb_info *info);
-static int pvr2fbcon_updatevar(int con, struct fb_info *info);
-
- /*
- * Internal/hardware-specific routines
- */
-
static u_long get_line_length(int xres_virtual, int bpp);
static void set_color_bitfields(struct fb_var_screeninfo *var);
-static int pvr2_getcolreg(u_int regno, u_int *red, u_int *green, u_int *blue,
- u_int *transp, struct fb_info *info);
-
-static int pvr2_encode_fix(struct fb_fix_screeninfo *fix,
- struct pvr2fb_par *par);
-static int pvr2_decode_var(struct fb_var_screeninfo *var,
- struct pvr2fb_par *par);
-static int pvr2_encode_var(struct fb_var_screeninfo *var,
- struct pvr2fb_par *par);
-static void pvr2_get_par(struct pvr2fb_par *par);
-static void pvr2_set_var(struct fb_var_screeninfo *var);
-static void pvr2_pan_var(struct fb_var_screeninfo *var);
-static int pvr2_update_par(void);
-static void pvr2_update_display(void);
-static void pvr2_init_display(void);
+static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int pvr2fb_set_par(struct fb_info *info);
+static void pvr2_update_display(struct fb_info *info);
+static void pvr2_init_display(struct fb_info *info);
static void pvr2_do_blank(void);
static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id, struct pt_regs *fp);
static int pvr2_init_cable(void);
@@ -252,19 +203,18 @@
int val, int size);
static struct fb_ops pvr2fb_ops = {
- .owner = THIS_MODULE,
- .fb_get_fix = pvr2fb_get_fix,
- .fb_get_var = pvr2fb_get_var,
- .fb_set_var = pvr2fb_set_var,
- .fb_get_cmap = pvr2fb_get_cmap,
- .fb_set_cmap = pvr2fb_set_cmap,
- .fb_setcolreg = pvr2fb_setcolreg,
- .fb_pan_display = pvr2fb_pan_display,
- .fb_blank = pvr2fb_blank,
+ .owner = THIS_MODULE,
+ .fb_setcolreg = pvr2fb_setcolreg,
+ .fb_blank = pvr2fb_blank,
+ .fb_check_var = pvr2fb_check_var,
+ .fb_set_par = pvr2fb_set_par,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = soft_cursor,
};
static struct fb_videomode pvr2_modedb[] __initdata = {
-
/*
* Broadcast video modes (PAL and NTSC). I'm unfamiliar with
* PAL-M and PAL-N, but from what I've read both modes parallel PAL and
@@ -275,21 +225,16 @@
/* 640x480 @ 60Hz interlaced (NTSC) */
"ntsc_640x480i", 60, 640, 480, TV_CLK, 38, 33, 0, 18, 146, 26,
FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP
- },
-
- {
+ }, {
/* 640x240 @ 60Hz (NTSC) */
/* XXX: Broken! Don't use... */
"ntsc_640x240", 60, 640, 240, TV_CLK, 38, 33, 0, 0, 146, 22,
FB_SYNC_BROADCAST, FB_VMODE_YWRAP
- },
-
- {
+ }, {
/* 640x480 @ 60hz (VGA) */
"vga_640x480", 60, 640, 480, VGA_CLK, 38, 33, 0, 18, 146, 26,
0, FB_VMODE_YWRAP
- },
-
+ },
};
#define NUM_TOTAL_MODES ARRAY_SIZE(pvr2_modedb)
@@ -301,222 +246,10 @@
static int defmode = DEFMODE_NTSC;
static char *mode_option __initdata = NULL;
-/* Get the fixed part of the display */
-
-static int pvr2fb_get_fix(struct fb_fix_screeninfo *fix, int con,
- struct fb_info *info)
-{
- struct pvr2fb_par par;
-
- if (con == -1)
- pvr2_get_par(&par);
- else {
- int err;
-
- if ((err = pvr2_decode_var(&fb_display[con].var, &par)))
- return err;
- }
- return pvr2_encode_fix(fix, &par);
-}
-
-/* Get the user-defined part of the display */
-
-static int pvr2fb_get_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info)
-{
- int err = 0;
-
- if (con == -1) {
- struct pvr2fb_par par;
-
- pvr2_get_par(&par);
- err = pvr2_encode_var(var, &par);
- } else
- *var = fb_display[con].var;
-
- return err;
-}
-
-/* Set the user-defined part of the display */
-
-static int pvr2fb_set_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info)
-{
- int err, activate = var->activate;
- int oldxres, oldyres, oldvxres, oldvyres, oldbpp;
- struct pvr2fb_par par;
-
- struct display *display;
- if (con >= 0)
- display = &fb_display[con];
- else
- display = &disp; /* used during initialization */
-
- /*
- * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
- * as FB_VMODE_SMOOTH_XPAN is only used internally
- */
-
- if (var->vmode & FB_VMODE_CONUPDATE) {
- var->vmode |= FB_VMODE_YWRAP;
- var->xoffset = display->var.xoffset;
- var->yoffset = display->var.yoffset;
- }
- if ((err = pvr2_decode_var(var, &par)))
- return err;
- pvr2_encode_var(var, &par);
-
- /* Do memory check and bitfield set here?? */
-
- if ((activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) {
- oldxres = display->var.xres;
- oldyres = display->var.yres;
- oldvxres = display->var.xres_virtual;
- oldvyres = display->var.yres_virtual;
- oldbpp = display->var.bits_per_pixel;
- display->var = *var;
- if (oldxres != var->xres || oldyres != var->yres ||
- oldvxres != var->xres_virtual || oldvyres != var->yres_virtual ||
- oldbpp != var->bits_per_pixel) {
- struct fb_fix_screeninfo fix;
-
- pvr2_encode_fix(&fix, &par);
- display->scrollmode = SCROLL_YREDRAW;
- display->visual = fix.visual;
- display->type = fix.type;
- display->type_aux = fix.type_aux;
- display->ypanstep = fix.ypanstep;
- display->ywrapstep = fix.ywrapstep;
- display->line_length = fix.line_length;
- display->can_soft_blank = 1;
- display->inverse = pvr2fb_inverse;
- switch (var->bits_per_pixel) {
-#ifdef FBCON_HAS_CFB16
- case 16:
- display->dispsw = &fbcon_cfb16;
- display->dispsw_data = fbcon_cmap.cfb16;
- break;
-#endif
-#ifdef FBCON_HAS_CFB24
- case 24:
- display->dispsw = &fbcon_cfb24;
- display->dispsw_data = fbcon_cmap.cfb24;
- break;
-#endif
-#ifdef FBCON_HAS_CFB32
- case 32:
- display->dispsw = &fbcon_cfb32;
- display->dispsw_data = fbcon_cmap.cfb32;
- break;
-#endif
- default:
- display->dispsw = &fbcon_dummy;
- break;
- }
- if (fb_info.changevar)
- (*fb_info.changevar)(con);
- }
- if (oldbpp != var->bits_per_pixel) {
- if ((err = fb_alloc_cmap(&display->cmap, 0, 0)))
- return err;
- do_install_cmap(con, info);
- }
- if (con == info->currcon)
- pvr2_set_var(&display->var);
- }
-
- return 0;
-}
-
-/*
- * Pan or wrap the display.
- * This call looks only at xoffset, yoffset and the FB_VMODE_YRAP flag
- */
-
-static int pvr2fb_pan_display(struct fb_var_screeninfo *var, int con,
- struct fb_info *info)
-{
- if (var->vmode & FB_VMODE_YWRAP) {
- if (var->yoffset<0 || var->yoffset >=
- fb_display[con].var.yres_virtual || var->xoffset)
- return -EINVAL;
- } else {
- if (var->xoffset+fb_display[con].var.xres >
- fb_display[con].var.xres_virtual ||
- var->yoffset+fb_display[con].var.yres >
- fb_display[con].var.yres_virtual)
- return -EINVAL;
- }
- if (con == info->currcon)
- pvr2_pan_var(var);
- fb_display[con].var.xoffset = var->xoffset;
- fb_display[con].var.yoffset = var->yoffset;
- if (var->vmode & FB_VMODE_YWRAP)
- fb_display[con].var.vmode |= FB_VMODE_YWRAP;
- else
- fb_display[con].var.vmode &= ~FB_VMODE_YWRAP;
-
- return 0;
-}
-
-/* Get the colormap */
-
-static int pvr2fb_get_cmap(struct fb_cmap *cmap, int kspc, int con,
- struct fb_info *info)
-{
- if (con == info->currcon) /* current console? */
- return fb_get_cmap(cmap, kspc, pvr2_getcolreg, info);
- else if (fb_display[con].cmap.len) /* non default colormap? */
- fb_copy_cmap(&fb_display[con].cmap, cmap, kspc ? 0 : 2);
- else
- fb_copy_cmap(fb_default_cmap(1<<fb_display[con].var.bits_per_pixel),
- cmap, kspc ? 0 : 2);
- return 0;
-}
-
-/* Set the colormap */
-
-static int pvr2fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
- struct fb_info *info)
-{
- int err;
-
- if (!fb_display[con].cmap.len) { /* no colormap allocated? */
- if ((err = fb_alloc_cmap(&fb_display[con].cmap,
- 1<<fb_display[con].var.bits_per_pixel,
- 0)))
- return err;
- }
- if (con == info->currcon) /* current console? */
- return fb_set_cmap(cmap, kspc, info);
- else
- fb_copy_cmap(cmap, &fb_display[con].cmap, kspc ? 0 : 1);
-
- return 0;
-}
-
-static int pvr2fbcon_switch(int con, struct fb_info *info)
-{
- /* Do we have to save the colormap? */
- if (fb_display[info->currcon].cmap.len)
- fb_get_cmap(&fb_display[info->currcon].cmap, 1, pvr2_getcolreg, info);
-
- info->currcon = con;
- pvr2_set_var(&fb_display[con].var);
- /* Install new colormap */
- do_install_cmap(con, info);
- return 0;
-}
-
-static int pvr2fbcon_updatevar(int con, struct fb_info *info)
-{
- pvr2_pan_var(&fb_display[con].var);
- return 0;
-}
-
static int pvr2fb_blank(int blank, struct fb_info *info)
{
do_blank = blank ? blank : -1;
+ return 0;
}
static inline u_long get_line_length(int xres_virtual, int bpp)
@@ -548,52 +281,29 @@
}
}
-static int pvr2_getcolreg(u_int regno, u_int *red, u_int *green, u_int *blue,
- u_int *transp, struct fb_info *info)
-{
- if (regno > 255)
- return 1;
-
- *red = palette[regno].red;
- *green = palette[regno].green;
- *blue = palette[regno].blue;
- *transp = 0;
- return 0;
-}
-
static int pvr2fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
if (regno > 255)
return 1;
- palette[regno].red = red;
- palette[regno].green = green;
- palette[regno].blue = blue;
-
if (regno < 16) {
- switch (currbpp) {
-#ifdef FBCON_HAS_CFB16
+ switch (info->var.bits_per_pixel) {
case 16: /* RGB 565 */
- fbcon_cmap.cfb16[regno] = (red & 0xf800) |
- ((green & 0xfc00) >> 5) |
+ ((u16*)(info->pseudo_palette))[regno] = (red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11);
break;
-#endif
-#ifdef FBCON_HAS_CFB24
case 24: /* RGB 888 */
red >>= 8; green >>= 8; blue >>= 8;
- fbcon_cmap.cfb24[regno] = (red << 16) | (green << 8) | blue;
+ ((u32*)(info->pseudo_palette))[regno] = (red << 16) | (green << 8) | blue;
break;
-#endif
-#ifdef FBCON_HAS_CFB32
case 32: /* ARGB 8888 */
red >>= 8; green >>= 8; blue >>= 8;
- fbcon_cmap.cfb32[regno] = (red << 16) | (green << 8) | blue;
+ ((u32*)(info->pseudo_palette))[regno] = (transp << 24) |(red << 16) | (green << 8) | blue;
break;
-#endif
default:
- DPRINTK("Invalid bit depth %d?!?\n", currbpp);
+ DPRINTK("Invalid bit depth %d?!?\n", info->var.bits_per_pixel);
return 1;
}
}
@@ -601,85 +311,33 @@
return 0;
}
-
-static int pvr2_encode_fix(struct fb_fix_screeninfo *fix,
- struct pvr2fb_par *par)
-{
- memset(fix, 0, sizeof(struct fb_fix_screeninfo));
- strcpy(fix->id, pvr2fb_name);
- fix->smem_start = videomemory;
- fix->smem_len = videomemorysize;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->type_aux = 0;
- fix->visual = FB_VISUAL_TRUECOLOR;
-
- if (par->vmode & FB_VMODE_YWRAP) {
- fix->ywrapstep = 1;
- fix->xpanstep = fix->ypanstep = 0;
- } else {
- fix->ywrapstep = 0;
- fix->xpanstep = 1;
- fix->ypanstep = 1;
- }
- fix->line_length = par->next_line;
-
- return 0;
-}
-
-/*
- * Create a hardware video mode using the framebuffer values. If a value needs
- * to be clipped or constrained it's done here. This routine needs a bit more
- * work to make sure we're doing the right tests at the right time.
- */
-static int pvr2_decode_var(struct fb_var_screeninfo *var,
- struct pvr2fb_par *par)
+static int pvr2fb_set_par(struct fb_info *info)
{
+ struct pvr2fb_par *par = (struct pvr2fb_par *)info->par;
+ struct fb_var_screeninfo *var = &info->var;
u_long line_length;
u_short vtotal;
- if (var->pixclock != TV_CLK && var->pixclock != VGA_CLK) {
- DPRINTK("Invalid pixclock value %d\n", var->pixclock);
- return -EINVAL;
- }
- par->pixclock = var->pixclock;
-
- if ((par->xres = var->xres) < 320)
- par->xres = 320;
- if ((par->yres = var->yres) < 240)
- par->yres = 240;
- if ((par->vxres = var->xres_virtual) < par->xres)
- par->vxres = par->xres;
- if ((par->vyres = var->yres_virtual) < par->yres)
- par->vyres = par->yres;
-
- if ((par->bpp = var->bits_per_pixel) <= 16)
- par->bpp = 16;
- else if ((par->bpp = var->bits_per_pixel) <= 24)
- par->bpp = 24;
- else if ((par->bpp = var->bits_per_pixel) <= 32)
- par->bpp = 32;
-
- currbpp = par->bpp;
-
/*
* XXX: It's possible that a user could use a VGA box, change the cable
- * type in hardware (i.e. switch from VGA<->composite), then change modes
- * (i.e. switching to another VT). If that happens we should automagically
- * change the output format to cope, but currently I don't have a VGA box
- * to make sure this works properly.
+ * type in hardware (i.e. switch from VGA<->composite), then change
+ * modes (i.e. switching to another VT). If that happens we should
+ * automagically change the output format to cope, but currently I
+ * don't have a VGA box to make sure this works properly.
*/
cable_type = pvr2_init_cable();
if (cable_type == CT_VGA && video_output != VO_VGA)
video_output = VO_VGA;
- par->vmode = var->vmode & FB_VMODE_MASK;
- if (par->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA)
+ var->vmode &= FB_VMODE_MASK;
+ if (var->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA)
par->is_interlaced = 1;
/*
* XXX: Need to be more creative with this (i.e. allow doublecan for
* PAL/NTSC output).
*/
- par->is_doublescan = (par->yres < 480 && video_output == VO_VGA);
+ if (var->vmode & FB_VMODE_DOUBLE && video_output == VO_VGA)
+ par->is_doublescan = 1;
par->hsync_total = var->left_margin + var->xres + var->right_margin +
var->hsync_len;
@@ -691,22 +349,12 @@
if (par->is_interlaced)
vtotal /= 2;
if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) {
- /* PAL video output */
- /* XXX: Should be using a range here ... ? */
- if (par->hsync_total != PAL_HTOTAL) {
- DPRINTK("invalid hsync total for PAL\n");
- return -EINVAL;
- }
/* XXX: Check for start values here... */
/* XXX: Check hardware for PAL-compatibility */
par->borderstart_h = 116;
par->borderstart_v = 44;
} else {
/* NTSC video output */
- if (par->hsync_total != NTSC_HTOTAL) {
- DPRINTK("invalid hsync total for NTSC\n");
- return -EINVAL;
- }
par->borderstart_h = 126;
par->borderstart_v = 18;
}
@@ -714,155 +362,122 @@
/* VGA mode */
/* XXX: What else needs to be checked? */
/*
- * XXX: We have a little freedom in VGA modes, what ranges should
- * be here (i.e. hsync/vsync totals, etc.)?
+ * XXX: We have a little freedom in VGA modes, what ranges
+ * should be here (i.e. hsync/vsync totals, etc.)?
*/
par->borderstart_h = 126;
par->borderstart_v = 40;
}
/* Calculate the remainding offsets */
- par->borderstop_h = par->borderstart_h + par->hsync_total -
- var->hsync_len;
- par->borderstop_v = par->borderstart_v + par->vsync_total -
- var->vsync_len;
par->diwstart_h = par->borderstart_h + var->left_margin;
par->diwstart_v = par->borderstart_v + var->upper_margin;
+ par->borderstop_h = par->diwstart_h + var->xres +
+ var->right_margin;
+ par->borderstop_v = par->diwstart_v + var->yres +
+ var->lower_margin;
+
if (!par->is_interlaced)
par->borderstop_v /= 2;
-
- if (par->xres < 640)
+ if (info->var.xres < 640)
par->is_lowres = 1;
- /* XXX: Needs testing. */
- if (!((par->vmode ^ var->vmode) & FB_VMODE_YWRAP)) {
- par->xoffset = var->xoffset;
- par->yoffset = var->yoffset;
- if (par->vmode & FB_VMODE_YWRAP) {
- if (par->xoffset || par->yoffset < 0 || par->yoffset >=
- par->vyres)
- par->xoffset = par->yoffset = 0;
- } else {
- if (par->xoffset < 0 || par->xoffset > par->vxres-par->xres ||
- par->yoffset < 0 || par->yoffset > par->vyres-par->yres)
- par->xoffset = par->yoffset = 0;
- }
- } else
- par->xoffset = par->yoffset = 0;
-
- /* Check memory sizes */
line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
- if (line_length * var->yres_virtual > videomemorysize)
- return -ENOMEM;
- par->disp_start = videomemory + (get_line_length(par->vxres, par->bpp) *
- par->yoffset) * get_line_length(par->xoffset, par->bpp);
- par->next_line = line_length;
-
+ par->disp_start = videomemory + (line_length * var->yoffset) * line_length;
+ info->fix.line_length = line_length;
return 0;
}
-static int pvr2_encode_var(struct fb_var_screeninfo *var,
- struct pvr2fb_par *par)
+static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
- memset(var, 0, sizeof(struct fb_var_screeninfo));
+ struct pvr2fb_par *par = (struct pvr2fb_par *)info->par;
+ u_short vtotal, hsync_total;
+ u_long line_length;
- var->xres = par->xres;
- var->yres = par->yres;
- var->xres_virtual = par->vxres;
- var->yres_virtual = par->vyres;
- var->xoffset = par->xoffset;
- var->yoffset = par->yoffset;
+ if (var->pixclock != TV_CLK || var->pixclock != VGA_CLK) {
+ DPRINTK("Invalid pixclock value %d\n", var->pixclock);
+ return -EINVAL;
+ }
- var->bits_per_pixel = par->bpp;
- set_color_bitfields(var);
+ if (var->xres < 320)
+ var->xres = 320;
+ if (var->yres < 240)
+ var->yres = 240;
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 24)
+ var->bits_per_pixel = 24;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
- var->activate = FB_ACTIVATE_NOW;
- var->height = -1;
- var->width = -1;
+ set_color_bitfields(var);
- var->pixclock = par->pixclock;
+ if (var->vmode & FB_VMODE_YWRAP) {
+ if (var->xoffset || var->yoffset < 0 ||
+ var->yoffset >= var->yres_virtual)
+ var->xoffset = var->yoffset = 0;
+ } else {
+ if (var->xoffset > var->xres_virtual - var->xres ||
+ var->yoffset > var->yres_virtual - var->yres ||
+ var->xoffset < 0 || var->yoffset < 0)
+ var->xoffset = var->yoffset = 0;
+ }
+ } else
+ var->xoffset = var->yoffset = 0;
- if (par->is_doublescan)
+ /*
+ * XXX: Need to be more creative with this (i.e. allow doublecan for
+ * PAL/NTSC output).
+ */
+ if (var->yres < 480 && video_output == VO_VGA)
var->vmode = FB_VMODE_DOUBLE;
- if (par->is_interlaced)
- var->vmode |= FB_VMODE_INTERLACED;
- else
- var->vmode |= FB_VMODE_NONINTERLACED;
-
- var->right_margin = par->borderstop_h - (par->diwstart_h + par->xres);
- var->left_margin = par->diwstart_h - par->borderstart_h;
- var->hsync_len = par->borderstart_h + (par->hsync_total - par->borderstop_h);
- var->upper_margin = par->diwstart_v - par->borderstart_v;
- var->lower_margin = par->borderstop_v - (par->diwstart_v + par->yres);
- var->vsync_len = par->borderstart_v + (par->vsync_total - par->borderstop_v);
if (video_output != VO_VGA)
- var->sync = FB_SYNC_BROADCAST;
-
- if (par->vmode & FB_VMODE_YWRAP)
- var->vmode |= FB_VMODE_YWRAP;
-
- return 0;
-}
-
-static void pvr2_get_par(struct pvr2fb_par *par)
-{
- *par = currentpar;
-}
-
-/* Setup the new videomode in hardware */
-
-static void pvr2_set_var(struct fb_var_screeninfo *var)
-{
- do_vmode_pan = 0;
- do_vmode_full = 0;
- pvr2_decode_var(var, ¤tpar);
+ var->sync = FB_SYNC_BROADCAST | FB_VMODE_INTERLACED;
- do_vmode_full = 1;
-}
-
-/*
- * Pan or wrap the display
- * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag in `var'.
- */
-static void pvr2_pan_var(struct fb_var_screeninfo *var)
-{
- struct pvr2fb_par *par = ¤tpar;
-
- par->xoffset = var->xoffset;
- par->yoffset = var->yoffset;
- if (var->vmode & FB_VMODE_YWRAP)
- par->vmode |= FB_VMODE_YWRAP;
- else
- par->vmode &= ~FB_VMODE_YWRAP;
-
- do_vmode_pan = 0;
- pvr2_update_par();
- do_vmode_pan = 1;
-}
-
-static int pvr2_update_par(void)
-{
- struct pvr2fb_par *par = ¤tpar;
- u_long move;
-
- move = get_line_length(par->xoffset, par->bpp);
- if (par->yoffset) {
- par->disp_start += (par->next_line * par->yoffset) + move;
- } else
- par->disp_start += move;
+ hsync_total = var->left_margin + var->xres + var->right_margin +
+ var->hsync_len;
+ vtotal = var->upper_margin + var->yres + var->lower_margin +
+ var->vsync_len;
+ if (var->sync & FB_SYNC_BROADCAST) {
+ if (var->vmode & FB_VMODE_INTERLACED)
+ vtotal /= 2;
+ if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) {
+ /* PAL video output */
+ /* XXX: Should be using a range here ... ? */
+ if (hsync_total != PAL_HTOTAL) {
+ DPRINTK("invalid hsync total for PAL\n");
+ return -EINVAL;
+ }
+ } else {
+ /* NTSC video output */
+ if (hsync_total != NTSC_HTOTAL) {
+ DPRINTK("invalid hsync total for NTSC\n");
+ return -EINVAL;
+ }
+ }
+ /* Check memory sizes */
+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+ if (line_length * var->yres_virtual > videomemorysize)
+ return -ENOMEM;
return 0;
}
-static void pvr2_update_display(void)
+static void pvr2_update_display(struct fb_info *info)
{
- struct pvr2fb_par *par = ¤tpar;
+ struct pvr2fb_par *par = (struct pvr2fb_par *) info->par;
+ struct fb_var_screeninfo *var = &info->var;
/* Update the start address of the display image */
ctrl_outl(par->disp_start, DISP_DIWADDRL);
ctrl_outl(par->disp_start +
- get_line_length(par->xoffset + par->xres, par->bpp),
+ get_line_length(var->xoffset+var->xres, var->bits_per_pixel),
DISP_DIWADDRS);
}
@@ -872,11 +487,12 @@
* registers are still undocumented.
*/
-static void pvr2_init_display(void)
+static void pvr2_init_display(struct fb_info *info)
{
- struct pvr2fb_par *par = ¤tpar;
+ struct pvr2fb_par *par = (struct pvr2fb_par *) info->par;
+ struct fb_var_screeninfo *var = &info->var;
u_short diw_height, diw_width, diw_modulo = 1;
- u_short bytesperpixel = par->bpp / 8;
+ u_short bytesperpixel = var->bits_per_pixel >> 3;
/* hsync and vsync totals */
ctrl_outl((par->vsync_total << 16) | par->hsync_total, DISP_SYNCSIZE);
@@ -885,16 +501,16 @@
/* since we're "panning" within vram, we need to offset things based
* on the offset from the virtual x start to our real gfx. */
if (video_output != VO_VGA && par->is_interlaced)
- diw_modulo += par->next_line / 4;
- diw_height = (par->is_interlaced ? par->yres / 2 : par->yres);
- diw_width = get_line_length(par->xres, par->bpp) / 4;
+ diw_modulo += info->fix.line_length / 4;
+ diw_height = (par->is_interlaced ? var->yres / 2 : var->yres);
+ diw_width = get_line_length(var->xres, var->bits_per_pixel) / 4;
ctrl_outl((diw_modulo << 20) | (--diw_height << 10) | --diw_width,
DISP_DIWSIZE);
/* display address, long and short fields */
ctrl_outl(par->disp_start, DISP_DIWADDRL);
ctrl_outl(par->disp_start +
- get_line_length(par->xoffset + par->xres, par->bpp),
+ get_line_length(var->xoffset+var->xres, var->bits_per_pixel),
DISP_DIWADDRS);
/* border horizontal, border vertical, border color */
@@ -919,7 +535,6 @@
/* video enable, color sync, interlace,
* hsync and vsync polarity (currently unused) */
ctrl_outl(0x100 | ((par->is_interlaced /*|4*/) << 4), DISP_SYNCCONF);
-
}
/* Simulate blanking by making the border cover the entire screen */
@@ -941,23 +556,20 @@
static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id, struct pt_regs *fp)
{
- if (do_vmode_pan || do_vmode_full)
- pvr2_update_display();
+ struct fb_info *info = dev_id;
+ if (do_vmode_pan || do_vmode_full)
+ pvr2_update_display(info);
if (do_vmode_full)
- pvr2_init_display();
-
+ pvr2_init_display(info);
if (do_vmode_pan)
do_vmode_pan = 0;
-
+ if (do_vmode_full)
+ do_vmode_full = 0;
if (do_blank) {
pvr2_do_blank();
do_blank = 0;
}
-
- if (do_vmode_full) {
- do_vmode_full = 0;
- }
return IRQ_HANDLED;
}
@@ -997,51 +609,83 @@
if (!MACH_DREAMCAST)
return -ENXIO;
+ fb_info = kmalloc(sizeof(struct fb_info) + sizeof(struct pvr2fb_par) +
+ sizeof(u32) * 16, GFP_KERNEL);
+
+ if (!fb_info) {
+ printk(KERN_ERR "Failed to allocate memory for fb_info\n");
+ return -ENOMEM;
+ }
+
+ memset(fb_info, 0, sizeof(fb_info) + sizeof(struct pvr2fb_par) + sizeof(u32) * 16);
+
+ currentpar = (struct pvr2fb_par *)(fb_info + 1);
+
/* Make a guess at the monitor based on the attached cable */
if (pvr2_init_cable() == CT_VGA) {
- fb_info.monspecs.hfmin = 30000;
- fb_info.monspecs.hfmax = 70000;
- fb_info.monspecs.vfmin = 60;
- fb_info.monspecs.vfmax = 60;
- }
- else { /* Not VGA, using a TV (taken from acornfb) */
- fb_info.monspecs.hfmin = 15469;
- fb_info.monspecs.hfmax = 15781;
- fb_info.monspecs.vfmin = 49;
- fb_info.monspecs.vfmax = 51;
+ fb_info->monspecs.hfmin = 30000;
+ fb_info->monspecs.hfmax = 70000;
+ fb_info->monspecs.vfmin = 60;
+ fb_info->monspecs.vfmax = 60;
+ } else {
+ /* Not VGA, using a TV (taken from acornfb) */
+ fb_info->monspecs.hfmin = 15469;
+ fb_info->monspecs.hfmax = 15781;
+ fb_info->monspecs.vfmin = 49;
+ fb_info->monspecs.vfmax = 51;
}
- /* XXX: This needs to pull default video output via BIOS or other means */
+ /*
+ * XXX: This needs to pull default video output via BIOS or other means
+ */
if (video_output < 0) {
- if (cable_type == CT_VGA)
+ if (cable_type == CT_VGA) {
video_output = VO_VGA;
- else
+ } else {
video_output = VO_NTSC;
+ }
}
- strcpy(fb_info.modename, pvr2fb_name);
- fb_info.changevar = NULL;
- fb_info.fbops = &pvr2fb_ops;
- fb_info.screen_base = (char *) videomemory;
- fb_info.disp = &disp;
- fb_info.currcon = -1;
- fb_info.switch_con = &pvr2fbcon_switch;
- fb_info.updatevar = &pvr2fbcon_updatevar;
- fb_info.flags = FBINFO_FLAG_DEFAULT;
+ pvr2_fix.smem_start = videomemory;
+ pvr2_fix.smem_len = videomemorysize;
+
+ fb_info->screen_base = ioremap_nocache(pvr2_fix.smem_start,
+ pvr2_fix.smem_len);
+
+ if (!fb_info->screen_base) {
+ printk("Failed to remap MMIO space\n");
+ kfree(fb_info);
+ return -ENXIO;
+ }
+
+ memset_io((unsigned long)fb_info->screen_base, 0, pvr2_fix.smem_len);
+
+ pvr2_fix.ypanstep = nopan ? 0 : 1;
+ pvr2_fix.ywrapstep = nowrap ? 0 : 1;
+
+ fb_info->fbops = &pvr2fb_ops;
+ fb_info->fix = pvr2_fix;
+ fb_info->par = currentpar;
+ fb_info->pseudo_palette = (void *)(fb_info->par + 1);
+ fb_info->flags = FBINFO_FLAG_DEFAULT;
+
memset(&var, 0, sizeof(var));
if (video_output == VO_VGA)
defmode = DEFMODE_VGA;
- if (!fb_find_mode(&var, &fb_info, mode_option, pvr2_modedb,
- NUM_TOTAL_MODES, &pvr2_modedb[defmode], 16)) {
- return -EINVAL;
- }
+ if (!mode_option)
+ mode_option = "640x480@60";
+
+ if (!fb_find_mode(&fb_info->var, fb_info, mode_option, pvr2_modedb,
+ NUM_TOTAL_MODES, &pvr2_modedb[defmode], 16))
+ fb_info->var = pvr2_var;
if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, 0,
- "pvr2 VBL handler", ¤tpar)) {
+ "pvr2 VBL handler", fb_info)) {
DPRINTK("couldn't register VBL int\n");
- return -EBUSY;
+ kfree(fb_info);
+ return -EBUSY;
}
#ifdef CONFIG_MTRR
@@ -1051,18 +695,18 @@
}
#endif
- pvr2fb_set_var(&var, -1, &fb_info);
-
- if (register_framebuffer(&fb_info) < 0)
+ if (register_framebuffer(fb_info) < 0) {
+ kfree(fb_info);
return -EINVAL;
+ }
modememused = get_line_length(var.xres_virtual, var.bits_per_pixel);
modememused *= var.yres_virtual;
printk("fb%d: %s frame buffer device, using %ldk/%ldk of video memory\n",
- fb_info.node, fb_info.modename, modememused>>10,
+ fb_info->node, fb_info->fix.id, modememused>>10,
videomemorysize>>10);
printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n",
- fb_info.node, var.xres, var.yres, var.bits_per_pixel,
+ fb_info->node, var.xres, var.yres, var.bits_per_pixel,
get_line_length(var.xres, var.bits_per_pixel),
(char *)pvr2_get_param(cables, NULL, cable_type, 3),
(char *)pvr2_get_param(outputs, NULL, video_output, 3));
@@ -1078,7 +722,8 @@
printk("pvr2fb: MTRR turned off\n");
}
#endif
- unregister_framebuffer(&fb_info);
+ unregister_framebuffer(fb_info);
+ kfree(fb_info);
}
static int __init pvr2_get_param(const struct pvr2_params *p, const char *s,
@@ -1102,7 +747,6 @@
* Parse command arguments. Supported arguments are:
* inverse Use inverse color maps
* nomtrr Disable MTRR usage
- * font:<fontname> Specify console font
* cable:composite|rgb|vga Override the video cable type
* output:NTSC|PAL|VGA Override the video output format
*
@@ -1117,8 +761,6 @@
char cable_arg[80];
char output_arg[80];
- fb_info.fontname[0] = '\0';
-
if (!options || !*options)
return 0;
@@ -1128,23 +770,25 @@
if (!strcmp(this_opt, "inverse")) {
pvr2fb_inverse = 1;
fb_invert_cmaps();
- } else if (!strncmp(this_opt, "font:", 5))
- strcpy(fb_info.fontname, this_opt + 5);
- else if (!strncmp(this_opt, "cable:", 6))
+ } else if (!strncmp(this_opt, "cable:", 6)) {
strcpy(cable_arg, this_opt + 6);
- else if (!strncmp(this_opt, "output:", 7))
+ } else if (!strncmp(this_opt, "output:", 7)) {
strcpy(output_arg, this_opt + 7);
+ } else if (!strncmp(this_opt, "nopan", 5)) {
+ nopan = 1;
+ } else if (!strncmp(this_opt, "nowrap", 6)) {
+ nowrap = 1;
#ifdef CONFIG_MTRR
- else if (!strncmp(this_opt, "nomtrr", 6))
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
enable_mtrr = 0;
#endif
- else
+ } else {
mode_option = this_opt;
+ }
}
if (*cable_arg)
cable_type = pvr2_get_param(cables, cable_arg, 0, 3);
-
if (*output_arg)
video_output = pvr2_get_param(outputs, output_arg, 0, 3);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri May 23 2003 - 22:00:46 EST