Hello -
This may be of interest...
kernel: 2.5.68-mm2
Linux distro: Red Hat 8.0 + updates
Hardware:
Celeron 1.2 Ghz on Intel Motherboard
512 MB RAM, 2x e100 ethernet
2.5.68-mm2 initially would not boot for me, and I noticed that
it was dying at the point where it was loading the e100 driver -
I booted -mm2 again specifying the eepro100 driver instead
and it came up fine.
To get another look at the e100 problem, I shut down networking
and removed the eepro100 module - all good, so far -
Then I said "modprobe e100" and the following oops occurred:
-------------------------- snip ------------------------------
Unable to handle kernel paging request at virtual address c048f190
printing eip:
c048f190
*pde = 00103027
*pte = 0048f000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c048f190>] Not tainted VLI
EFLAGS: 00010286
EIP is at apply_alternatives+0x0/0xf0
eax: e0e215be ebx: e0e0f618 ecx: 0000008b edx: 00000076
esi: c03df35b edi: e0e0f36e ebp: d566defc esp: d566dee0
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 1524, threadinfo=d566c000 task=d58b8a00)
Stack: c011abe4 e0e21548 e0e215be e0e0f2d2 e0dff000 e0e0f3e8 000004d8
d566df8c
c0143f2b e0dff000 e0e0f3e8 e0e26280 00000018 e0e26280 00000001
00000001
00000000 00000500 000004d8 000002d0 e09d7000 e0e26280 00000013
00000000
Call Trace:
[<c011abe4>] module_finalize+0x94/0xa0
[<c0143f2b>] load_module+0x6cb/0x910
[<c014420b>] sys_init_module+0x9b/0x370
[<c016df05>] sys_read+0x45/0x60
[<c010a51b>] syscall_call+0x7/0xb
Code: Bad EIP value.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 30 2003 - 22:00:22 EST