ChangeSet 1.977.29.5, 2003/04/02 11:29:55-08:00, greg@kroah.com
i2c: convert lm75 chip driver to use sysfs files.
drivers/i2c/chips/lm75.c | 185 +++++++++++++++++++----------------------------
1 files changed, 77 insertions(+), 108 deletions(-)
diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
--- a/drivers/i2c/chips/lm75.c Wed Apr 2 16:01:36 2003
+++ b/drivers/i2c/chips/lm75.c Wed Apr 2 16:01:36 2003
@@ -18,6 +18,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/* #define DEBUG 1 */
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -25,8 +27,6 @@
#include <linux/i2c-proc.h>
-#define LM75_SYSCTL_TEMP 1200 /* Degrees Celsius * 10 */
-
/* Addresses to scan */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { 0x48, 0x4f, SENSORS_I2C_END };
@@ -39,97 +39,113 @@
/* Many LM75 constants specified below */
/* The LM75 registers */
-#define LM75_REG_TEMP 0x00
-#define LM75_REG_CONF 0x01
-#define LM75_REG_TEMP_HYST 0x02
-#define LM75_REG_TEMP_OS 0x03
+#define LM75_REG_TEMP 0x00
+#define LM75_REG_CONF 0x01
+#define LM75_REG_TEMP_HYST 0x02
+#define LM75_REG_TEMP_OS 0x03
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
these macros are called: arguments may be evaluated more than once.
Fixing this is just not worth it. */
-#define TEMP_FROM_REG(val) ((((val & 0x7fff) >> 7) * 5) | ((val & 0x8000)?-256:0))
-#define TEMP_TO_REG(val) (SENSORS_LIMIT((val<0?(0x200+((val)/5))<<7:(((val) + 2) / 5) << 7),0,0xffff))
+#define TEMP_FROM_REG(val) ((((val & 0x7fff) >> 7) * 5) | ((val & 0x8000)?-256:0))
+#define TEMP_TO_REG(val) (SENSORS_LIMIT((val<0?(0x200+((val)/5))<<7:(((val) + 2) / 5) << 7),0,0xffff))
/* Initial values */
-#define LM75_INIT_TEMP_OS 600
-#define LM75_INIT_TEMP_HYST 500
+#define LM75_INIT_TEMP_OS 600
+#define LM75_INIT_TEMP_HYST 500
/* Each client has this additional data */
struct lm75_data {
- int sysctl_id;
-
- struct semaphore update_lock;
- char valid; /* !=0 if following fields are valid */
- unsigned long last_updated; /* In jiffies */
-
- u16 temp, temp_os, temp_hyst; /* Register values */
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ u16 temp_input; /* Register values */
+ u16 temp_max;
+ u16 temp_hyst;
};
static int lm75_attach_adapter(struct i2c_adapter *adapter);
-static int lm75_detect(struct i2c_adapter *adapter, int address,
- unsigned short flags, int kind);
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
static void lm75_init_client(struct i2c_client *client);
static int lm75_detach_client(struct i2c_client *client);
-static u16 swap_bytes(u16 val);
static int lm75_read_value(struct i2c_client *client, u8 reg);
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
-static void lm75_temp(struct i2c_client *client, int operation,
- int ctl_name, int *nrels_mag, long *results);
static void lm75_update_client(struct i2c_client *client);
/* This is the driver that will be inserted */
static struct i2c_driver lm75_driver = {
.owner = THIS_MODULE,
- .name = "LM75 sensor",
+ .name = "lm75",
.id = I2C_DRIVERID_LM75,
.flags = I2C_DF_NOTIFY,
.attach_adapter = lm75_attach_adapter,
.detach_client = lm75_detach_client,
};
-/* These files are created for each detected LM75. This is just a template;
- though at first sight, you might think we could use a statically
- allocated list, we need some way to get back to the parent - which
- is done through one of the 'extra' fields which are initialized
- when a new copy is allocated. */
-static ctl_table lm75_dir_table_template[] = {
- {LM75_SYSCTL_TEMP, "temp", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &lm75_temp},
- {0}
-};
-
static int lm75_id = 0;
+#define show(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct lm75_data *data = i2c_get_clientdata(client); \
+ int temp; \
+ \
+ lm75_update_client(client); \
+ temp = TEMP_FROM_REG(data->value); \
+ return sprintf(buf, "%d\n", temp * 100); \
+}
+show(temp_max);
+show(temp_hyst);
+show(temp_input);
+
+#define set(value, reg) \
+static ssize_t set_##value(struct device *dev, const char *buf, size_t count) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct lm75_data *data = i2c_get_clientdata(client); \
+ int temp = simple_strtoul(buf, NULL, 10) / 100; \
+ \
+ data->value = TEMP_TO_REG(temp); \
+ lm75_write_value(client, reg, data->value); \
+ return count; \
+}
+set(temp_max, LM75_REG_TEMP_OS);
+set(temp_hyst, LM75_REG_TEMP_HYST);
+
+static DEVICE_ATTR(temp_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static DEVICE_ATTR(temp_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp_input, S_IRUGO, show_temp_input, NULL);
+
static int lm75_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, lm75_detect);
}
/* This function is called by i2c_detect */
-static int lm75_detect(struct i2c_adapter *adapter, int address,
- unsigned short flags, int kind)
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, cur, conf, hyst, os;
struct i2c_client *new_client;
struct lm75_data *data;
int err = 0;
- const char *type_name, *client_name;
+ const char *name;
/* Make sure we aren't probing the ISA bus!! This is just a safety check
at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
if (i2c_is_isa_adapter(adapter)) {
- printk
- ("lm75.o: lm75_detect called for an ISA bus adapter?!?\n");
- return 0;
+ dev_dbg(&adapter->dev,
+ "lm75_detect called for an ISA bus adapter?!?\n");
+ goto exit;
}
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
- goto error0;
+ goto exit;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
@@ -138,7 +154,7 @@
sizeof(struct lm75_data),
GFP_KERNEL))) {
err = -ENOMEM;
- goto error0;
+ goto exit;
}
memset(new_client, 0x00, sizeof(struct i2c_client) +
sizeof(struct lm75_data));
@@ -157,16 +173,10 @@
hyst = i2c_smbus_read_word_data(new_client, 2);
os = i2c_smbus_read_word_data(new_client, 3);
for (i = 0; i <= 0x1f; i++)
- if (
- (i2c_smbus_read_byte_data
- (new_client, i * 8 + 1) != conf)
- ||
- (i2c_smbus_read_word_data
- (new_client, i * 8 + 2) != hyst)
- ||
- (i2c_smbus_read_word_data
- (new_client, i * 8 + 3) != os))
- goto error1;
+ if ((i2c_smbus_read_byte_data(new_client, i * 8 + 1) != conf) ||
+ (i2c_smbus_read_word_data(new_client, i * 8 + 2) != hyst) ||
+ (i2c_smbus_read_word_data(new_client, i * 8 + 3) != os))
+ goto exit_free;
}
/* Determine the chip type - only one kind supported! */
@@ -174,15 +184,15 @@
kind = lm75;
if (kind == lm75) {
- type_name = "lm75";
- client_name = "LM75 chip";
+ name = "lm75";
} else {
- pr_debug("lm75.o: Internal error: unknown kind (%d)?!?", kind);
- goto error1;
+ dev_dbg(&adapter->dev, "Internal error: unknown kind (%d)?!?",
+ kind);
+ goto exit_free;
}
/* Fill in the remaining client fields and put it into the global list */
- strncpy(new_client->dev.name, client_name, DEVICE_NAME_SIZE);
+ strncpy(new_client->dev.name, name, DEVICE_NAME_SIZE);
new_client->id = lm75_id++;
data->valid = 0;
@@ -190,36 +200,23 @@
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
- goto error3;
+ goto exit_free;
- /* Register a new directory entry with module sensors */
- i = i2c_register_entry(new_client, type_name, lm75_dir_table_template);
- if (i < 0) {
- err = i;
- goto error4;
- }
- data->sysctl_id = i;
+ device_create_file(&new_client->dev, &dev_attr_temp_max);
+ device_create_file(&new_client->dev, &dev_attr_temp_min);
+ device_create_file(&new_client->dev, &dev_attr_temp_input);
lm75_init_client(new_client);
return 0;
-/* OK, this is not exactly good programming practice, usually. But it is
- very code-efficient in this case. */
-
- error4:
- i2c_detach_client(new_client);
- error3:
- error1:
+exit_free:
kfree(new_client);
- error0:
+exit:
return err;
}
static int lm75_detach_client(struct i2c_client *client)
{
- struct lm75_data *data = i2c_get_clientdata(client);
-
- i2c_deregister_entry(data->sysctl_id);
i2c_detach_client(client);
kfree(client);
return 0;
@@ -271,44 +268,16 @@
if ((jiffies - data->last_updated > HZ + HZ / 2) ||
(jiffies < data->last_updated) || !data->valid) {
- pr_debug("Starting lm75 update\n");
+ dev_dbg(&client->dev, "Starting lm75 update\n");
- data->temp = lm75_read_value(client, LM75_REG_TEMP);
- data->temp_os = lm75_read_value(client, LM75_REG_TEMP_OS);
- data->temp_hyst =
- lm75_read_value(client, LM75_REG_TEMP_HYST);
+ data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
+ data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS);
+ data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
-}
-
-
-static void lm75_temp(struct i2c_client *client, int operation, int ctl_name,
- int *nrels_mag, long *results)
-{
- struct lm75_data *data = i2c_get_clientdata(client);
- if (operation == SENSORS_PROC_REAL_INFO)
- *nrels_mag = 1;
- else if (operation == SENSORS_PROC_REAL_READ) {
- lm75_update_client(client);
- results[0] = TEMP_FROM_REG(data->temp_os);
- results[1] = TEMP_FROM_REG(data->temp_hyst);
- results[2] = TEMP_FROM_REG(data->temp);
- *nrels_mag = 3;
- } else if (operation == SENSORS_PROC_REAL_WRITE) {
- if (*nrels_mag >= 1) {
- data->temp_os = TEMP_TO_REG(results[0]);
- lm75_write_value(client, LM75_REG_TEMP_OS,
- data->temp_os);
- }
- if (*nrels_mag >= 2) {
- data->temp_hyst = TEMP_TO_REG(results[1]);
- lm75_write_value(client, LM75_REG_TEMP_HYST,
- data->temp_hyst);
- }
- }
}
static int __init sensors_lm75_init(void)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 07 2003 - 22:00:18 EST