Hi,
This is my idea of how to start the consolidation of s390 and s390x
that Christoph Hellwig proposed (repeatedly).
It's a hack to add a configuration option for 64 bit kernels to arch/s390
and to use files from arch/s390x instead of the ones in arch/s390 if they
exist both (same for include/asm). Any duplicate files can simply be
deleted from {arch/,include/asm-}s390x.
The necessary steps would be:
- Add support for compiling 64 bit in arch/s390 (this patch)
- While arch/s390x and include/s390x are not empty:
* Merge some s390x files into their s390 counterparts
* Remove merged and duplicate files
- Remove the makefile hacks introduced here
- Profit
Arnd <><
===== arch/s390/kernel/Makefile 1.17 vs edited =====
--- 1.17/arch/s390/kernel/Makefile Sun Mar 9 23:15:54 2003
+++ edited/arch/s390/kernel/Makefile Sun Mar 30 03:13:37 2003
@@ -16,3 +16,24 @@
# Kernel debugging
#
obj-$(CONFIG_REMOTE_DEBUG) += gdb-stub.o #gdb-low.o
+
+obj-$(CONFIG_S390_SUPPORT) += linux32.o signal32.o ioctl32.o wrapper32.o \
+ exec32.o exec_domain32.o
+obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o
+
+ifdef CONFIG_ARCH_S390X
+$(obj)%.o: $(patsubst arch/s390/%,arch/s390x/%,$(src))%.S
+ $(call if_changed_dep,as_o_S)
+
+$(obj)%.o: $(patsubst arch/s390/%,arch/s390x/%,$(src))%.c
+ifdef CONFIG_MODVERSIONS
+ $(call if_changed_rule,vcc_o_c)
+else
+ $(call if_changed_dep,cc_o_c)
+endif
+endif
+
+#
+# This is just to get the dependencies...
+#
+binfmt_elf32.o: $(TOPDIR)/fs/binfmt_elf.c
===== arch/s390/lib/Makefile 1.8 vs edited =====
--- 1.8/arch/s390/lib/Makefile Sun Dec 15 21:03:39 2002
+++ edited/arch/s390/lib/Makefile Sun Mar 30 03:42:32 2003
@@ -7,3 +7,8 @@
EXTRA_AFLAGS := -traditional
obj-y = delay.o memset.o strcmp.o strncpy.o uaccess.o
+
+ifdef CONFIG_ARCH_S390X
+$(obj)%.o: $(patsubst arch/s390/%,arch/s390x/%,$(src))%.S
+ $(call if_changed_dep,as_o_S)
+endif
===== arch/s390/mm/Makefile 1.6 vs edited =====
--- 1.6/arch/s390/mm/Makefile Sun Dec 15 21:03:39 2002
+++ edited/arch/s390/mm/Makefile Sun Mar 30 03:24:36 2003
@@ -3,3 +3,8 @@
#
obj-y := init.o fault.o ioremap.o extable.o
+
+ifdef CONFIG_ARCH_S390X
+$(obj)%.o: $(patsubst arch/s390/%,arch/s390x/%,$(src))%.c
+ $(call if_changed_dep,cc_o_c)
+endif
===== arch/s390/Kconfig 1.8 vs edited =====
--- 1.8/arch/s390/Kconfig Sat Mar 8 23:50:37 2003
+++ edited/arch/s390/Kconfig Thu Mar 27 23:25:00 2003
@@ -7,10 +7,6 @@
bool
default y
-config UID16
- bool
- default y
-
config RWSEM_GENERIC_SPINLOCK
bool
@@ -31,13 +27,23 @@
mainframes of the S/390 generation. You should have installed the
s390-compiler released by IBM (based on gcc-2.95.1) before.
-source "init/Kconfig"
+config UID16
+ bool
+ default y
+ depends on ARCH_S390X
+source "init/Kconfig"
menu "Base setup"
comment "Processor type and features"
+config ARCH_S390X
+ bool "64 bit kernel"
+ help
+ Select this option if you have a 64 bit IBM zSeries machine
+ and want to use the 64 bit addressing mode.
+
config SMP
bool "Symmetric multi-processing support"
---help---
@@ -67,16 +73,9 @@
If you don't know what to do here, say N.
-config MATHEMU
- bool "IEEE FPU emulation"
- help
- This option is required for IEEE compliant floating point arithmetic
- on the Alpha. The only time you would ever not say Y is to say M in
- order to debug the code. Say Y unless you know what you are doing.
-
config NR_CPUS
int "Maximum number of CPUs (2-32)"
- depends on SMP
+ depends on SMP && ARCH_S390X = 'n'
default "32"
help
This allows you to specify the maximum number of CPUs which this
@@ -85,13 +84,54 @@
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-64)"
+ depends on SMP && ARCH_S390X
+ default "64"
+ help
+ This allows you to specify the maximum number of CPUs which this
+ kernel will support. The maximum supported value is 64 and the
+ minimum value which makes sense is 2.
+
+ This is purely to save memory - each supported CPU adds
+ approximately sixteen kilobytes to the kernel image.
+
+config MATHEMU
+ bool "IEEE FPU emulation"
+ depends on ARCH_S390X = n
+ help
+ This option is required for IEEE compliant floating point arithmetic
+ on the Alpha. The only time you would ever not say Y is to say M in
+ order to debug the code. Say Y unless you know what you are doing.
+
+config S390_SUPPORT
+ bool "Kernel support for 31 bit emulation"
+ depends on ARCH_S390X
+ help
+ Select this option if you want to enable your system kernel to
+ handle system-calls from ELF binaries for 31 bit ESA. This option
+ (and some other stuff like libraries and such) is needed for
+ executing 31 bit applications. It is safe to say "Y".
+
+config COMPAT
+ bool
+ depends on S390_SUPPORT
+ default y
+
+config BINFMT_ELF32
+ tristate "Kernel support for 31 bit ELF binaries"
+ depends on S390_SUPPORT
+ help
+ This allows you to run 32-bit Linux/ELF binaries on your Ultra.
+ Everybody wants this; say Y.
comment "I/O subsystem configuration"
config MACHCHK_WARNING
bool "Process warning machine checks"
help
- Select this option if you want the machine check handler on IBM S/390 or
+ Select this option if you want the machine check handler on IBM S/390 or
zSeries to process warning machine checks (e.g. on power failures).
If unsure, say "Y".
===== arch/s390/Makefile 1.24 vs edited =====
--- 1.24/arch/s390/Makefile Fri Mar 7 22:28:49 2003
+++ edited/arch/s390/Makefile Sun Mar 30 03:41:46 2003
@@ -12,15 +12,35 @@
#
# Copyright (C) 1994 by Linus Torvalds
#
+ifndef CONFIG_ARCH_S390X
LDFLAGS := -m elf_s390
-OBJCOPYFLAGS := -O binary
-LDFLAGS_vmlinux := -e start
LDFLAGS_BLOB := --format binary --oformat elf32-s390
+CFLAGS += -m31
+
+else
+
+LDFLAGS := -m elf64_s390
+MODFLAGS += -fpic -D__PIC__
+LDFLAGS_BLOB := --format binary --oformat elf64-s390
+CFLAGS += -m64
-CFLAGS += -pipe -fno-strength-reduce -finline-limit=10000 -Wno-sign-compare
+# this is a hack to use both include/asm directories
+# include/asm-s390x should be removed before 2.6
+CC += -Iinclude/asm-s390x
+prepare: include/asm-s390x/asm
+include/asm-s390x/asm:
+ @ln -s . $@
+
+define src64 $$(patsubst arch/s390/%,arch/s390x/%,$(src))
+endef
+export src64
+endif
+OBJCOPYFLAGS := -O binary
+LDFLAGS_vmlinux := -e start
+CFLAGS += -pipe -fno-strength-reduce -finline-limit-10000 -Wno-sign-compare
-head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
+head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
core-y += arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/
libs-y += arch/$(ARCH)/lib/
===== arch/s390/vmlinux.lds.S 1.10 vs edited =====
--- 1.10/arch/s390/vmlinux.lds.S Mon Mar 3 20:37:38 2003
+++ edited/arch/s390/vmlinux.lds.S Fri Mar 28 00:00:30 2003
@@ -3,11 +3,20 @@
*/
#include <asm-generic/vmlinux.lds.h>
+#include <linux/config.h>
+#ifndef CONFIG_ARCH_S390X
OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
OUTPUT_ARCH(s390)
ENTRY(_start)
jiffies = jiffies_64 + 4;
+#else
+OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390")
+OUTPUT_ARCH(s390)
+ENTRY(_start)
+jiffies = jiffies_64;
+#endif
+
SECTIONS
{
. = 0x00000000;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Mar 31 2003 - 22:00:36 EST