Hi,
The recent changes in 2.5.65-BK broke my pcmcia network driver.
It smells like a synchronisation and locking issue between the
pcmcia / ds / pcnet_cs modules loading and initialisation.
This is reproducible 99%, in 1% of the cases timing gets slightly
modified and I get a succesful loading, see below.
I've enabled debugging in lib/kobject.c and here is what I get:
---------8<---------------------------------------8<-----------
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
subsystem pcmcia_socket: registering
kobject pcmcia_socket: registering. parent: <NULL>, set: class
kobject devices: registering. parent: pcmcia_socket, set: <NULL>
kobject drivers: registering. parent: pcmcia_socket, set: <NULL>
subsystem pcmcia: registering
kobject pcmcia: registering. parent: <NULL>, set: bus
kobject devices: registering. parent: pcmcia, set: <NULL>
kobject drivers: registering. parent: pcmcia, set: <NULL>
ds: no socket drivers loaded!
pcnet_cs: Unknown symbol pcmcia_unregister_driver
pcnet_cs: Unknown symbol pcmcia_register_driver
kobject cardbus: registering. parent: <NULL>, set: drivers
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000006
subsystem pcmcia: registering
kobject pcmcia: registering. parent: <NULL>, set: bus
Unable to handle kernel paging request at virtual address c7980928
printing eip:
c01b8748
*pde = 01171067
*pte = 00000000
Oops: 0002 [#1]
CPU: 0
EIP: 0060:[<c01b8748>] Not tainted
EFLAGS: 00010282
EIP is at kobject_add+0x108/0x120
eax: c03123a8 ebx: c03123a0 ecx: c7980928 edx: c797b928
esi: c03123dc edi: c797b914 ebp: c6397f50 esp: c6397f30
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 682, threadinfo=c6396000 task=c6ab06c0)
Stack: c029b6f4 00000042 c02ac63a c03123b0 00000000 c797b904 c797b904 c797b924
c6397f64 c01b8aff c797b914 c797b914 c797b900 c6397f84 c0212909 c797b904
0000001d 0000000d c797b9e0 c02debd8 c02debd8 c6397f90 c7951012 c797b900
Call Trace:
[<c797b904>] pcmcia_bus_type+0x4/0xe0 [ds]
[<c797b904>] pcmcia_bus_type+0x4/0xe0 [ds]
[<c797b924>] pcmcia_bus_type+0x24/0xe0 [ds]
[<c01b8aff>] subsystem_register+0x2f/0x50
[<c797b914>] pcmcia_bus_type+0x14/0xe0 [ds]
[<c797b914>] pcmcia_bus_type+0x14/0xe0 [ds]
[<c797b900>] pcmcia_bus_type+0x0/0xe0 [ds]
[<c0212909>] bus_register+0x39/0xb0
[<c797b904>] pcmcia_bus_type+0x4/0xe0 [ds]
[<c797b9e0>] +0x0/0x100 [ds]
[<c7951012>] +0x12/0x20 [ds]
[<c797b900>] pcmcia_bus_type+0x0/0xe0 [ds]
[<c7951248>] init_pcmcia_module+0x8/0xe [ds]
[<c0135c5a>] sys_init_module+0x15a/0x240
[<c010b25b>] syscall_call+0x7/0xb
Code: 89 11 89 4a 04 8b 47 20 83 c0 10 89 04 24 e8 e5 00 00 00 89
---------8<---------------------------------------8<-----------
Under some circumstances modifying slightly the timings (here it
was a forced fsck on /), all loads corectly, as shown below:
---------8<---------------------------------------8<-----------
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
subsystem pcmcia_socket: registering
kobject pcmcia_socket: registering. parent: <NULL>, set: class
kobject devices: registering. parent: pcmcia_socket, set: <NULL>
kobject drivers: registering. parent: pcmcia_socket, set: <NULL>
subsystem pcmcia: registering
kobject pcmcia: registering. parent: <NULL>, set: bus
kobject devices: registering. parent: pcmcia, set: <NULL>
kobject drivers: registering. parent: pcmcia, set: <NULL>
ds: no socket drivers loaded!
pcnet_cs: Unknown symbol pcmcia_unregister_driver
pcnet_cs: Unknown symbol pcmcia_register_driver
kobject cardbus: registering. parent: <NULL>, set: drivers
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000419
subsystem pcmcia: registering
kobject pcmcia: registering. parent: <NULL>, set: bus
kobject devices: registering. parent: pcmcia, set: <NULL>
kobject drivers: registering. parent: pcmcia, set: <NULL>
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
kobject pcnet_cs: registering. parent: <NULL>, set: drivers
kobject eth0: registering. parent: <NULL>, set: net
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:50:01:00:38:DE
Module pcnet_cs cannot be unloaded due to unsafe usage in include/linux/module.h:432
---------8<---------------------------------------8<-----------
Need more details ?
Thanks,
Stelian.
-- Stelian Pop <stelian.pop@fr.alcove.com> Alcove - http://www.alcove.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Mar 31 2003 - 22:00:16 EST