Re: is irq smp affinity good for anything?

From: Richard B. Johnson (root@chaos.analogic.com)
Date: Tue Mar 11 2003 - 07:40:15 EST


On Tue, 11 Mar 2003 uaca@alumni.uv.es wrote:

>
>
> if IRQ affinity cannot help in interrupt latency and
> interrupt auto/balancing get's the same throughtput
> as irq binding... what is irq smp affinity for???
>
> from this mail from intel
> http://www.uwsg.iu.edu/hypermail/linux/kernel/0301.0/1886.html
> I understand that intel's interrupt auto/balancing works equal that manually
> tunning the interrupts....
>
> so?
>
> Ulisses
>
>
>
> On Mon, Mar 10, 2003 at 11:22:22PM +0100, uaca@alumni.uv.es wrote:
> >
> > Hi all
> >
> > I have measured interrupt latency of a bi-processor system with akpm's intlat/timepeg
> > utilities and kernel 2.4.20. The system uses is a two-way PIII@800Mhz
> > -- Intel motherboard, ISP 2100 if I remember ok, with a SCSI disk on a aic-7896
> >
> > I tried to know if I could reduce the latency of an interrupt handler by
> > binding this handler to a particular cpu and not allowing any other
> > interrupt to execute in that cpu.
> >
> > I found that overall latency increases, but also the latency on both cpus,
> > that is, I could not reduce the latency on the interrupt I was interested
> >
> > I also tried to disallowing just scsi & ethernet handlers to execute on the
> > cpu in wich I'm binding the interrupt handler I'm insterested with, I get
> > similar results
> >
> > the interrupt handler I'm interested with is an ATM card receiving
> > around 6000 interrupts/second
> >
[SNIPPED...]

33 MHz machines easily handle 6,000 interrupts per second --
unless you are trying to execute code within that interrupt
that requires 1/6000th of a second to execute! Perhaps it's
not a "latency" problem, but an interrupt code-bloat problem
where most of the stuff should be executed out of the interrupt
context.

There are timer queues and kernel threads available that might
help you. Also a tightly-coupled user-mode daemon that uses
your driver only to interface with the hardware and not do
any "logic" is probably the way to go.

Cheers,
Dick Johnson
Penguin : Linux version 2.4.20 on an i686 machine (797.90 BogoMips).
Why is the government concerned about the lunatic fringe? Think about it.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Mar 15 2003 - 22:00:25 EST