Zwane Mwaikambo wrote:
>>>
>>>Maybe somebody can come up with other schenarios.
>>>
>>>It would be interesting to hear what "Device Manager" (or whatever it is
>>>called) unde WinXP claims the interrupts are on this machine... Are they
>>>all on irq 48 on XP too? Or has XP gotten magic knowledge somewhere
>>>(ACPI?) and they are on different irq's?
>>>
>>> Linus
>
>
> How about using 'mptable' (Authored by Pete Zaitcev) to view the
> bus,pin and ioapic layout? It showed all the INTA,B,C,D pins on a
> troublesome system of mine and helped track down the problem.
>
> http://people.redhat.com/zaitcev/linux/mptable-2.0.15a-1.i386.rpm
> http://people.redhat.com/zaitcev/linux/mptable-2.0.15a-1.src.rpm
>
> Regards,
> Zwane
Ok,
I hope this adds anything.
Attached is the output of `mptable -dmesg -extra`
Ron Arts
===============================================================================
MPTable, version 2.0.15 Linux
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f7040
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x2e
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0x9f970
signature: 'PCMP'
base table length: 412
version: 1.4
checksum: 0x5b
OEM ID: ' '
Product ID: 'Kings Canyon'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 40
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
-- Processors: APIC ID Version State Family Model Step Flags 0 0x14 BSP, usable 15 2 4 0x3febfbff 6 0x14 AP, usable 15 2 4 0x3febfbff 1 0x14 AP, usable 15 2 4 0x3febfbff 7 0x14 AP, usable 15 2 4 0x3febfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6 ISA -- I/O APICs: APIC ID Version State Address 2 0x20 usable 0xfec00000 3 0x20 usable 0xfec80000 4 0x20 usable 0xfec80400 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 6 0 2 0 INT active-hi edge 6 1 2 1 INT active-hi edge 6 0 2 2 INT active-hi edge 6 3 2 3 INT active-hi edge 6 4 2 4 INT active-hi edge 6 5 2 5 INT active-hi edge 6 6 2 6 INT active-lo level 0 29:C 2 18 INT active-hi edge 6 8 2 8 INT active-hi edge 6 9 2 9 INT active-lo level 0 29:B 2 19 INT active-lo level 0 29:A 2 16 INT active-lo level 5 2:A 2 17 INT active-hi edge 6 13 2 13 INT active-hi edge 6 14 2 14 INT active-hi edge 6 15 2 15 INT active-lo level 3 4:A 4 0 INT active-lo level 3 5:A 4 0 INT active-lo level 3 6:A 4 0 INT active-lo level 3 7:A 4 0 INT active-lo level 4 2:A 3 4 INT active-lo level 4 2:B 3 5 INT active-lo level 4 4:A 3 7 INT active-lo level 5 1:A 2 16 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 6 0 255 0 NMI active-hi edge 6 0 255 1-------------------------------------------------------------------------------
dmesg output:
(TM) CPU 2.40GHz stepping 04 Total of 4 processors activated (19103.65 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-7, 2-10, 2-11, 2-12, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-6, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 008 08 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 00F 0F 0 0 0 0 0 1 1 51 06 00F 0F 0 0 0 0 0 1 1 59 07 000 00 1 0 0 0 0 0 0 00 08 00F 0F 0 0 0 0 0 1 1 61 09 00F 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 00F 0F 0 0 0 0 0 1 1 71 0e 00F 0F 0 0 0 0 0 1 1 79 0f 00F 0F 0 0 0 0 0 1 1 81 10 00F 0F 1 1 0 1 0 1 1 89 11 00F 0F 1 1 0 1 0 1 1 91 12 00F 0F 1 1 0 1 0 1 1 99 13 00F 0F 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 00F 0F 1 1 0 1 0 1 1 A9 05 00F 0F 1 1 0 1 0 1 1 B1 06 000 00 1 0 0 0 0 0 0 00 07 00F 0F 1 1 0 1 0 1 1 B9 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 1 1 0 1 0 1 1 C1 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ28 -> 1:4 IRQ29 -> 1:5 IRQ31 -> 1:7 IRQ48 -> 2:0 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2395.0997 MHz. ..... host bus clock speed is 99.1587 MHz. cpu: 0, clocks: 194934, slice: 38986 CPU0<T0:194928,T1:155936,D:6,S:38986,C:194934> cpu: 1, clocks: 194934, slice: 38986 cpu: 3, clocks: 194934, slice: 38986 cpu: 2, clocks: 194934, slice: 38986 CPU1<T0:194928,T1:116944,D:12,S:38986,C:194934> CPU2<T0:194928,T1:77968,D:2,S:38986,C:194934> CPU3<T0:194928,T1:38976,D:8,S:38986,C:194934> checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Discovered primary peer bus 10 [IRQ] PCI: Discovered primary peer bus 11 [IRQ] PCI: Discovered primary peer bus 12 [IRQ] PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B3,I4,P0) -> 48 PCI->APIC IRQ transform: (B3,I5,P1) -> 48 PCI->APIC IRQ transform: (B3,I6,P2) -> 48 PCI->APIC IRQ transform: (B3,I7,P3) -> 48 PCI->APIC IRQ transform: (B4,I2,P2) -> 28 PCI->APIC IRQ transform: (B4,I2,P3) -> 29 PCI->APIC IRQ transform: (B4,I4,P0) -> 31 PCI->APIC IRQ transform: (B5,I1,P1) -> 16 PCI->APIC IRQ transform: (B5,I2,P2) -> 17 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e oprofile: can't get RTC I/O Ports block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide-floppy driver 0.99.newide Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 257k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
blk: queue c45f8418, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST336607LC Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c2d9fe18, I/O limit 4095Mb (mask 0xffffffff) Vendor: SDR Model: GEM318 Rev: 0 Type: Processor ANSI SCSI revision: 02 blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:1:0: Tagged Queuing enabled. Depth 253 blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) Partition check: sda: sda1 sda2 sda3 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 200k freed EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,3), internal journal Adding Swap: 2040244k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: pci_module_init failed ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack (8192 buckets, 65536 max) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others divert: allocating divert_blk for eth0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:B9:2B, IRQ 17. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=211.184.226.193 DST=217.170.33.118 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=10288 DF PROTO=TCP SPT=42855 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=211.184.226.193 DST=217.170.33.118 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=10289 DF PROTO=TCP SPT=42855 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=64.191.52.220 DST=217.170.33.118 LEN=40 TOS=0x10 PREC=0x00 TTL=242 ID=37872 PROTO=TCP SPT=60142 DPT=3128 WINDOW=16384 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=64.191.52.220 DST=217.170.33.118 LEN=40 TOS=0x10 PREC=0x00 TTL=242 ID=9057 PROTO=TCP SPT=19241 DPT=6588 WINDOW=16384 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=64.191.52.220 DST=217.170.33.118 LEN=40 TOS=0x10 PREC=0x00 TTL=242 ID=37385 PROTO=TCP SPT=20112 DPT=8080 WINDOW=16384 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=211.41.128.70 DST=217.170.33.118 LEN=40 TOS=0x00 PREC=0x00 TTL=123 ID=16638 PROTO=TCP SPT=1524 DPT=1524 WINDOW=8620 RES=0x00 SYN URGP=0 Intel(R) PRO/1000 Network Driver - version 4.4.19-k2 Copyright (c) 1999-2002 Intel Corporation. divert: allocating divert_blk for eth1 eth1: Intel(R) PRO/1000 Network Connection Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth2 eth2: Digital DS21143 Tulip rev 65 at 0xf899c000, 00:C0:95:E6:69:B0, IRQ 48. tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth3 eth3: Digital DS21143 Tulip rev 65 at 0xf899e400, 00:C0:95:E6:69:B1, IRQ 48. tulip2: EEPROM default media type Autosense. tulip2: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip2: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip2: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip2: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth4 eth4: Digital DS21143 Tulip rev 65 at 0xf89f6800, 00:C0:95:E6:69:B2, IRQ 48. tulip3: EEPROM default media type Autosense. tulip3: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip3: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip3: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip3: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth5 eth5: Digital DS21143 Tulip rev 65 at 0xf89f8c00, 00:C0:95:E6:69:B3, IRQ 48.
--------------- scanpci output:
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x2540 Intel Device unknown
pci bus 0x0000 cardnum 0x00 function 0x01: vendor 0x8086 device 0x2541 Intel Device unknown
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x8086 device 0x2543 Intel Device unknown
pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x2482 Intel Device unknown
pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x2484 Intel Device unknown
pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x2487 Intel Device unknown
pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Device unknown
pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x2480 Intel Device unknown
pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x248b Intel Device unknown
pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x2483 Intel Device unknown
pci bus 0x0001 cardnum 0x1c function 0x00: vendor 0x8086 device 0x1461 Intel Device unknown
pci bus 0x0001 cardnum 0x1d function 0x00: vendor 0x8086 device 0x1460 Intel Device unknown
pci bus 0x0001 cardnum 0x1e function 0x00: vendor 0x8086 device 0x1461 Intel Device unknown
pci bus 0x0001 cardnum 0x1f function 0x00: vendor 0x8086 device 0x1460 Intel Device unknown
pci bus 0x0002 cardnum 0x01 function 0x00: vendor 0x1011 device 0x0024 Digital DC21152
pci bus 0x0003 cardnum 0x04 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet
pci bus 0x0003 cardnum 0x05 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet
pci bus 0x0003 cardnum 0x06 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet
pci bus 0x0003 cardnum 0x07 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet
pci bus 0x0004 cardnum 0x02 function 0x00: vendor 0x9005 device 0x00cf Adaptec Device unknown
pci bus 0x0004 cardnum 0x02 function 0x01: vendor 0x9005 device 0x00cf Adaptec Device unknown
pci bus 0x0004 cardnum 0x04 function 0x00: vendor 0x8086 device 0x100d Intel Device unknown
pci bus 0x0005 cardnum 0x01 function 0x00: vendor 0x1002 device 0x4752 ATI Mach64 GR
pci bus 0x0005 cardnum 0x02 function 0x00: vendor 0x8086 device 0x1229 Intel 82557/8/9 10/100MBit network controller
----------------- /proc/pci output:
PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. e7500 (Plumas) DRAM Controller (rev 3). Bus 0, device 0, function 1: Class ff00: Intel Corp. e7500 (Plumas) DRAM Controller Error Reporting (rev 3). Bus 0, device 2, function 0: PCI bridge: Intel Corp. e7500 (Plumas) HI_B Virtual PCI-to-PCI Bridge (F0) (rev 3). Master Capable. Latency=64. Min Gnt=4. Bus 0, device 29, function 0: USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 2). IRQ 16. I/O at 0x1400 [0x141f]. Bus 0, device 29, function 1: USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 2). IRQ 19. I/O at 0x1420 [0x143f]. Bus 0, device 29, function 2: USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 2). IRQ 18. I/O at 0x1440 [0x145f]. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 66). Master Capable. No bursts. Min Gnt=12. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801CA ISA Bridge (LPC) (rev 2). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801CA IDE U100 (rev 2). I/O at 0x1460 [0x146f]. Non-prefetchable 32 bit memory at 0x80000000 [0x800003ff]. Bus 0, device 31, function 3: SMBus: Intel Corp. 82801CA/CAM SMBus (rev 2). I/O at 0x1100 [0x111f]. Bus 1, device 28, function 0: PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 3). Non-prefetchable 32 bit memory at 0xfc100000 [0xfc100fff]. Bus 1, device 30, function 0: PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (#2) (rev 3). Non-prefetchable 32 bit memory at 0xfc101000 [0xfc101fff]. Bus 1, device 29, function 0: PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 3). Master Capable. Latency=64. Min Gnt=36. Bus 1, device 31, function 0: PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (#2) (rev 3). Master Capable. Latency=64. Min Gnt=36. Bus 2, device 1, function 0: PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 3). Master Capable. Latency=64. Min Gnt=4. Bus 3, device 4, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2000 [0x207f]. Non-prefetchable 32 bit memory at 0xfc200000 [0xfc2003ff]. Bus 3, device 5, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (#2) (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2080 [0x20ff]. Non-prefetchable 32 bit memory at 0xfc200400 [0xfc2007ff]. Bus 3, device 6, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (#3) (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2400 [0x247f]. Non-prefetchable 32 bit memory at 0xfc200800 [0xfc200bff]. Bus 3, device 7, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (#4) (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2480 [0x24ff]. Non-prefetchable 32 bit memory at 0xfc200c00 [0xfc200fff]. Bus 4, device 2, function 0: SCSI storage controller: Adaptec AIC-7899P U160/m (rev 1). IRQ 28. Master Capable. Latency=64. Min Gnt=40.Max Lat=25. I/O at 0x3000 [0x30ff]. Non-prefetchable 64 bit memory at 0xfc340000 [0xfc340fff]. Bus 4, device 2, function 1: SCSI storage controller: Adaptec AIC-7899P U160/m (#2) (rev 1). IRQ 29. Master Capable. Latency=64. Min Gnt=40.Max Lat=25. I/O at 0x3400 [0x34ff]. Non-prefetchable 64 bit memory at 0xfc341000 [0xfc341fff]. Bus 4, device 4, function 0: Ethernet controller: Intel Corp. 82544GC Gigabit Ethernet Controller (rev 2). IRQ 31. Master Capable. Latency=64. Min Gnt=255. Non-prefetchable 32 bit memory at 0xfc320000 [0xfc33ffff]. Non-prefetchable 32 bit memory at 0xfc300000 [0xfc31ffff]. I/O at 0x3800 [0x381f]. Bus 5, device 1, function 0: VGA compatible controller: ATI Technologies Inc Rage XL (rev 39). IRQ 16. Master Capable. Latency=64. Min Gnt=8. Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff]. I/O at 0x4000 [0x40ff]. Non-prefetchable 32 bit memory at 0xfc400000 [0xfc400fff]. Bus 5, device 2, function 0: Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 13). IRQ 17. Master Capable. Latency=64. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xfc401000 [0xfc401fff]. I/O at 0x4400 [0x443f]. Non-prefetchable 32 bit memory at 0xfc420000 [0xfc43ffff].
------------------------ /proc/interrupts output:
CPU0 CPU1 CPU2 CPU3 0: 2578705 2579945 2579879 2579906 IO-APIC-edge timer 1: 1 0 1 1 IO-APIC-edge keyboard 2: 0 0 0 0 XT-PIC cascade 8: 1 0 0 0 IO-APIC-edge rtc 15: 1 0 0 1 IO-APIC-edge ide1 17: 12260 12348 12338 12225 IO-APIC-level eth0 28: 1194 1251 1197 1228 IO-APIC-level aic7xxx 29: 4 4 4 4 IO-APIC-level aic7xxx 31: 13 12 12 12 IO-APIC-level eth1 48: 11 8 8 9 IO-APIC-level eth2, eth3, eth4, eth5 NMI: 0 0 0 0 LOC: 10318937 10318977 10318977 10318976 ERR: 0 MIS: 0
===============================================================================
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 07 2003 - 22:00:26 EST