Problem: Palm Tungsten T + kernel 2.4.20 + Tungsten patch applied

From: Andree Leidenfrost (aleidenf@bigpond.net.au)
Date: Fri Feb 21 2003 - 05:45:12 EST

Dear list

I'm having the above problem. In detail, when pressing the hotsync
button, /var/log/syslog says:

Feb 21 21:15:30 aurich kernel: hub.c: new USB device 00:10.0-1, assigned
address 3
Feb 21 21:15:30 aurich kernel: usb.c: USB device 3 (vend/prod
0x830/0x60) is not claimed by any active driver.
Feb 21 21:15:33 aurich /etc/hotplug/usb.agent: Setup visor for USB
product 830/60/100
Feb 21 21:15:33 aurich kernel: usb.c: registered new driver serial
Feb 21 21:15:33 aurich kernel: usbserial.c: USB Serial Driver core v1.4
Feb 21 21:15:33 aurich kernel: usbserial.c: USB Serial support
registered for Handspring Visor / Palm 4.0 / Clié 4.x
Feb 21 21:15:33 aurich kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter detected
Feb 21 21:15:36 aurich kernel: usb_control/bulk_msg: timeout
Feb 21 21:15:36 aurich kernel: visor.c: visor_startup - error getting
connection information
Feb 21 21:15:36 aurich kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Feb 21 21:15:36 aurich kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
Feb 21 21:15:36 aurich kernel: usbserial.c: USB Serial support
registered for Sony Clié 3.5
Feb 21 21:15:36 aurich kernel: visor.c: USB HandSpring Visor, Palm m50x,
Sony Clié driver v1.6
Feb 21 21:15:36 aurich kernel: usb-uhci.c: interrupt, status 2, frame#
1431
Feb 21 21:15:36 aurich kernel: usbdevfs: USBDEVFS_CONTROL failed dev 3
rqt 128 rq 6 len 0 ret -32
Feb 21 21:15:36 aurich kernel: usbdevfs: USBDEVFS_CONTROL failed dev 3
rqt 128 rq 6 len 0 ret -32

I have applied the following patches:

--- visor.c.orig Wed Feb 19 22:55:38 2003
+++ visor.c Wed Feb 19 22:57:00 2003
@@ -174,6 +174,7 @@
         { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
         { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
         { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
+ { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
         { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
         { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
         { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
@@ -195,6 +196,7 @@
         { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
         { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
         { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
+ { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
         { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
         { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
         { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },

--- visor.h.orig Wed Feb 19 22:57:20 2003
+++ visor.h Wed Feb 19 22:58:04 2003
@@ -27,6 +27,7 @@
 #define PALM_I705_ID 0x0020
 #define PALM_M125_ID 0x0040
 #define PALM_M130_ID 0x0050
+#define PALM_TUNGSTEN_T_ID 0x0060
 #define PALM_ZIRE_ID 0x0070
 
 #define SONY_VENDOR_ID 0x054C

Also I have added the following line to /etc/hotplug/usb.usermap:
visor 0x0003 0x0830 0x0060 0x0000
0x0000 0x00 0x00 0x00
0x00 0x00 0x00 0x00000000

I do not think it matters at this stage, but I'm running pilot-link
0.11.7 and jpliot 0.99.4 on Debian woody.

Syncing my m505 works fine, but I'd love to be able to sync my new and
shiny Tungsten T... ;-)

I have searched google and found this patch and success messages of
other people but no clue as to what my problem could.

Cheers
Andree 

-- 
Andree Leidenfrost
Sydney - Australia

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:33 EST