PATCH: fix fd_mcs build for scsi changes, mca compt

From: Alan Cox (alan@lxorguk.ukuu.org.uk)
Date: Fri Feb 14 2003 - 16:04:18 EST


diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.5.60-ref/drivers/scsi/fd_mcs.c linux-2.5.60-ac1/drivers/scsi/fd_mcs.c
--- linux-2.5.60-ref/drivers/scsi/fd_mcs.c 2003-02-14 21:21:36.000000000 +0000
+++ linux-2.5.60-ac1/drivers/scsi/fd_mcs.c 2003-02-14 20:17:01.000000000 +0000
@@ -87,6 +87,7 @@
 #include <linux/delay.h>
 #include <linux/mca.h>
 #include <linux/spinlock.h>
+#include <linux/mca-legacy.h>
 
 #include <asm/io.h>
 #include <asm/system.h>
@@ -732,7 +733,7 @@
                 outb(0x40 | FIFO_COUNT, Interrupt_Cntl_port);
 
                 outb(0x82, SCSI_Cntl_port); /* Bus Enable + Select */
- outb(adapter_mask | (1 << current_SC->target), SCSI_Data_NoACK_port);
+ outb(adapter_mask | (1 << current_SC->device->id), SCSI_Data_NoACK_port);
 
                 /* Stop arbitration and enable parity */
                 outb(0x10 | PARITY_MASK, TMC_Cntl_port);
@@ -744,7 +745,7 @@
                 status = inb(SCSI_Status_port);
                 if (!(status & 0x01)) {
                         /* Try again, for slow devices */
- if (fd_mcs_select(shpnt, current_SC->target)) {
+ if (fd_mcs_select(shpnt, current_SC->device->id)) {
 #if EVERY_ACCESS
                                 printk(" SFAIL ");
 #endif
@@ -802,7 +803,7 @@
 #endif
 #if ERRORS_ONLY
                         if (current_SC->SCp.Status && current_SC->SCp.Status != 2 && current_SC->SCp.Status != 8) {
- printk("ERROR fd_mcs: target = %d, command = %x, status = %x\n", current_SC->target, current_SC->cmnd[0], current_SC->SCp.Status);
+ printk("ERROR fd_mcs: target = %d, command = %x, status = %x\n", current_SC->device->id, current_SC->cmnd[0], current_SC->SCp.Status);
                         }
 #endif
                         break;
@@ -1150,7 +1151,7 @@
 
 static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
- struct Scsi_Host *shpnt = SCpnt->host;
+ struct Scsi_Host *shpnt = SCpnt->device->host;
 
         if (in_command) {
                 panic("fd_mcs: fd_mcs_queue() NOT REENTRANT!\n");
@@ -1243,7 +1244,7 @@
                 break;
         }
 
- printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", SCpnt->SCp.phase, SCpnt->target, *(unsigned char *) SCpnt->cmnd, SCpnt->use_sg, SCpnt->request_bufflen);
+ printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd, SCpnt->use_sg, SCpnt->request_bufflen);
         printk("sent_command = %d, have_data_in = %d, timeout = %d\n", SCpnt->SCp.sent_command, SCpnt->SCp.have_data_in, SCpnt->timeout);
 #if DEBUG_RACE
         printk("in_interrupt_flag = %d\n", in_interrupt_flag);
@@ -1286,7 +1287,7 @@
 
 static int fd_mcs_abort(Scsi_Cmnd * SCpnt)
 {
- struct Scsi_Host *shpnt = SCpnt->host;
+ struct Scsi_Host *shpnt = SCpnt->device->host;
 
         unsigned long flags;
 #if EVERY_ACCESS || ERRORS_ONLY || DEBUG_ABORT
@@ -1331,7 +1332,7 @@
 }
 
 static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) {
- struct Scsi_Host *shpnt = SCpnt->host;
+ struct Scsi_Host *shpnt = SCpnt->device->host;
 
 #if DEBUG_RESET
         static int called_once = 0;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Feb 15 2003 - 22:00:58 EST