I am having an issue with my scsi card. Here is some info.
jgofton@ns1:/var/log$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:08.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP
(rev 5c)
00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
00:0a.1 Input device controller: Creative Labs SB Live! (rev 01)
00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 20)
00:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 64)
This is what shows in the messages.log file: 2.4.20
Dec 1 11:10:32 ns1 kernel: SCSI subsystem driver Revision: 1.00
Dec 1 11:10:32 ns1 kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
DRIVER, Rev 6.2.8
Dec 1 11:10:32 ns1 kernel: <Adaptec 2940 Ultra2 SCSI adapter>
Dec 1 11:10:32 ns1 kernel: aic7890/91: Ultra2 Wide Channel A,
SCSI Id=7, 32/253 SCBs
Dec 1 11:10:32 ns1 kernel:
Dec 1 11:10:32 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:10:32 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:10:32 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:10:32 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:10:32 ns1 kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Dec 1 11:10:32 ns1 kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Dec 1 11:10:32 ns1 kernel: scsi: <fdomain> Detection failed (no card)
Dec 1 11:10:32 ns1 kernel: PCI: Enabling device 00:09.0 (0006 -> 0007)
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
and this is one that works. 2.4.18:
Dec 1 11:16:16 ns1 kernel: SCSI subsystem driver Revision: 1.00
Dec 1 11:16:16 ns1 kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
DRIVER, Rev 6.2.4
Dec 1 11:16:16 ns1 kernel: <Adaptec 2940 Ultra2 SCSI adapter>
Dec 1 11:16:16 ns1 kernel: aic7890/91: Ultra2 Wide Channel A,
SCSI Id=7, 32/253 SCBs
Dec 1 11:16:16 ns1 kernel:
Dec 1 11:16:16 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:16:16 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:16:16 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:16:16 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:16:16 ns1 kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Dec 1 11:16:16 ns1 kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Dec 1 11:16:16 ns1 kernel: scsi: <fdomain> Detection failed (no card)
Dec 1 11:16:16 ns1 kernel: PCI: Enabling device 00:09.0 (0006 -> 0007)
Dec 1 11:16:16 ns1 kernel: Attached scsi disk sda at scsi0, channel 0, id
0, lun 0
Dec 1 11:16:16 ns1 kernel: Attached scsi disk sdb at scsi0, channel 0, id
1, lun 0
Dec 1 11:16:16 ns1 kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz,
offset 63, 16bit)
Dec 1 11:16:16 ns1 kernel: SCSI device sda: 35861388 512-byte hdwr
sectors (18361 MB)
Dec 1 11:16:16 ns1 kernel: Partition check:
Dec 1 11:16:16 ns1 kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Dec 1 11:16:16 ns1 kernel: (scsi0:A:1): 80.000MB/s transfers (40.000MHz,
offset 63, 16bit)
Dec 1 11:16:16 ns1 kernel: SCSI device sdb: 35861388 512-byte hdwr
sectors (18361 MB)
Dec 1 11:16:16 ns1 kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
Is there a known problem and is there a fix? I can't seem to upgrade my
kernel without scsi issues.
-- Joe*** I can only please one person a day. Today is not your day and tomorrow doesn't look good either. ***
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Jan 31 2003 - 22:00:17 EST