Hi,
I'm using v1.10 of the sundance driver for DFE-580TX (on 2.4.19), I have
5 of these cards in a system. Every few weeks all networking on the box
stops working, only a reboot can fix it. (not tried unloading and
reloading the modules yet, box is miles away to get to keyboard).
Problem does not appear to be reproducable.
Is this a known problem, is there a solution, if not, would you like
some more debugging information?
Thanks.
Attached is lspci -vv, and /proc/interrupts output.
-- // Gianni Tedesco (gianni at scaramanga dot co dot uk) lynx --source www.scaramanga.co.uk/gianni-at-ecsc.asc | gpg --import 8646BE7D: 6D9F 2287 870E A2C9 8F60 3A3C 91B5 7669 8646 BE7D
00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64, cache line size 08
00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
00:03.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller Subsystem: Compaq Computer Corporation: Unknown device b0f3 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at f7df0000 (32-bit, non-prefetchable) [size=256]
00:04.0 RAID bus controller: Symbios Logic Inc. (formerly NCR): Unknown device 0010 (rev 02) Subsystem: Compaq Computer Corporation: Unknown device 4040 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 192 (7500ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=512K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Region 0: Memory at f3000000 (32-bit, prefetchable) [size=16M] Region 1: I/O ports at 2400 [size=256] Region 2: Memory at f4ff0000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51) Subsystem: ServerWorks OSB4 South Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 2800 [size=16]
01:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at 3000 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
01:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 3080 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
01:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at 3400 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
01:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 3480 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
02:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12) Subsystem: Compaq Computer Corporation: Unknown device a2f8 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at f7ef0000 (32-bit, non-prefetchable) [size=256] Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
02:06.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 00004000-00004fff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+
02:08.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=02, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 00005000-00005fff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+
02:09.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=02, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: 00006000-00006fff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+
03:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 4000 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
03:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 4080 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
03:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 4400 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
03:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 4480 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
04:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 5000 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
04:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at 5080 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
04:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 5400 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
04:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at 5480 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
05:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 6000 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
05:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 6080 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
05:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 6400 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
05:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 6480 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
07:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12) Subsystem: Compaq Computer Corporation: Unknown device a2f9 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at f7ff0000 (32-bit, non-prefetchable) [size=256] Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
07:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=07, secondary=08, subordinate=08, sec-latency=64 I/O behind bridge: 00007000-00007fff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+
08:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 7000 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
08:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 7080 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
08:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 7400 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
08:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12) Subsystem: D-Link System Inc: Unknown device 1012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 7480 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
CPU0 0: 4482909 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 11286193 XT-PIC eth0, eth2, eth9, eth11 5: 228654 XT-PIC ida0 8: 1 XT-PIC rtc 11: 10898381 XT-PIC eth1, eth3, eth8, eth10 14: 3 XT-PIC ide0 15: 4224483 XT-PIC eth4, eth5, eth6, eth7, eth12, eth13, eth14, eth15, eth16, eth17, eth18, eth19 NMI: 0 LOC: 4483084 ERR: 0 MIS: 0
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Jan 31 2003 - 22:00:16 EST