2.5.56 CardBus not accepting USB 2.0 adapter

From: Richard Chan (rspchan@starhub.net.sg)
Date: Fri Jan 10 2003 - 21:45:55 EST


2.5.56 CardBus is not accepting a USB 2.0 adapter due to
the infamous PCI resource collision problem. This was
also seen in 2.5.54, 2.5.55. The card works under 2.4.18.

lspci has
02:03.0 CardBus bridge: Texas Instruments PCI1420
02:03.1 CardBus bridge: Texas Instruments PCI1420

dmesg shows:
cs: cb_alloc(bus 3): vendor 0x1033, device 0x0035
PCI: Device 03:00.0 not available because of resource collisions
PCI: Device 03:00.1 not available because of resource collisions
PCI: Device 03:00.2 not available because of resource collisions

Other people on this list seem to have problems with network cards.
I reported this on the usb devel list but apparently it is CardBus
b0rkeness rather than a usb problem.

Any ideas?

Richard Chan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Jan 15 2003 - 22:00:36 EST