diff -urN a/arch/m68k/Kconfig b/arch/m68k/Kconfig
--- a/arch/m68k/Kconfig 2003-01-02 10:33:43.000000000 +0100
+++ b/arch/m68k/Kconfig 2003-01-02 16:35:35.000000000 +0100
@@ -1152,496 +1152,6 @@
source "net/Kconfig"
-menu "Network device support"
- depends on NET
-
-config NETDEVICES
- bool "Network device support"
- ---help---
- You can say N here if you don't intend to connect your Linux box to
- any other computer at all or if all your connections will be over a
- telephone line with a modem either via UUCP (UUCP is a protocol to
- forward mail and news between unix hosts over telephone lines; read
- the UUCP-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
- account or a BBS, even using term (term is a program which gives you
- almost full Internet connectivity if you have a regular dial up
- shell account on some Internet connected Unix computer. Read
- <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
- You'll have to say Y if your computer contains a network card that
- you want to use under Linux (make sure you know its name because you
- will be asked for it and read the Ethernet-HOWTO (especially if you
- plan to use more than one network card under Linux)) or if you want
- to use SLIP (Serial Line Internet Protocol is the protocol used to
- send Internet traffic over telephone lines or null modem cables) or
- CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
- and newer replacement for SLIP) or PLIP (Parallel Line Internet
- Protocol is mainly used to create a mini network by connecting the
- parallel ports of two local machines) or AX.25/KISS (protocol for
- sending Internet traffic over amateur radio links).
-
- Make sure to read the NET-3-HOWTO. Eventually, you will have to read
- Olaf Kirch's excellent and free book "Network Administrator's
- Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
- unsure, say Y.
-
-#
-# Network device configuration
-#
-config DUMMY
- tristate "Dummy net driver support"
- depends on NETDEVICES
- ---help---
- This is essentially a bit-bucket device (i.e. traffic you send to
- this device is consigned into oblivion) with a configurable IP
- address. It is most commonly used in order to make your currently
- inactive SLIP address seem like a real address for local programs.
- If you use SLIP or PPP, you might want to say Y here. Since this
- thing often comes in handy, the default is Y. It won't enlarge your
- kernel either. What a deal. Read about it in the Network
- Administrator's Guide, available from
- <http://www.linuxdoc.org/docs.html#guide>.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called dummy.o. If you want to use more than one dummy
- device at a time, you need to compile this driver as a module.
- Instead of 'dummy', the devices will then be called 'dummy0',
- 'dummy1' etc.
-
-config SLIP
- tristate "SLIP (serial line) support"
- depends on NETDEVICES
- ---help---
- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
- connect to your Internet service provider or to connect to some
- other local Unix box or if you want to configure your Linux box as a
- Slip/CSlip server for other people to dial in. SLIP (Serial Line
- Internet Protocol) is a protocol used to send Internet traffic over
- serial connections such as telephone lines or null modem cables;
- nowadays, the protocol PPP is more commonly used for this same
- purpose.
-
- Normally, your access provider has to support SLIP in order for you
- to be able to use it, but there is now a SLIP emulator called SLiRP
- around (available from
- <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
- allows you to use SLIP over a regular dial up shell connection. If
- you plan to use SLiRP, make sure to say Y to CSLIP, below. The
- NET-3-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>, explains how to
- configure SLIP. Note that you don't need this option if you just
- want to run term (term is a program which gives you almost full
- Internet connectivity if you have a regular dial up shell account on
- some Internet connected Unix computer. Read
- <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
- support will enlarge your kernel by about 4 KB. If unsure, say N.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called slip.o.
-
-config SLIP_COMPRESSED
- bool "CSLIP compressed headers"
- depends on SLIP
- ---help---
- This protocol is faster than SLIP because it uses compression on the
- TCP/IP headers (not on the data itself), but it has to be supported
- on both ends. Ask your access provider if you are not sure and
- answer Y, just in case. You will still be able to use plain SLIP. If
- you plan to use SLiRP, the SLIP emulator (available from
- <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
- allows you to use SLIP over a regular dial up shell connection, you
- definitely want to say Y here. The NET-3-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>, explains how to configure
- CSLIP. This won't enlarge your kernel.
-
-config SLIP_SMART
- bool "Keepalive and linefill"
- depends on SLIP
- help
- Adds additional capabilities to the SLIP driver to support the
- RELCOM line fill and keepalive monitoring. Ideal on poor quality
- analogue lines.
-
-config SLIP_MODE_SLIP6
- bool "Six bit SLIP encapsulation"
- depends on SLIP
- help
- Just occasionally you may need to run IP over hostile serial
- networks that don't pass all control characters or are only seven
- bit. Saying Y here adds an extra mode you can use with SLIP:
- "slip6". In this mode, SLIP will only send normal ASCII symbols over
- the serial device. Naturally, this has to be supported at the other
- end of the link as well. It's good enough, for example, to run IP
- over the async ports of a Camtec JNT Pad. If unsure, say N.
-
-config PPP
- tristate "PPP (point-to-point protocol) support"
- depends on NETDEVICES
- ---help---
- PPP (Point to Point Protocol) is a newer and better SLIP. It serves
- the same purpose: sending Internet traffic over telephone (and other
- serial) lines. Ask your access provider if they support it, because
- otherwise you can't use it; most Internet access providers these
- days support PPP rather than SLIP.
-
- To use PPP, you need an additional program called pppd as described
- in the PPP-HOWTO, available at
- <http://www.linuxdoc.org/docs.html#howto>. Make sure that you have
- the version of pppd recommended in <file:Documentation/Changes>.
- The PPP option enlarges your kernel by about 16 KB.
-
- There are actually two versions of PPP: the traditional PPP for
- asynchronous lines, such as regular analog phone lines, and
- synchronous PPP which can be used over digital ISDN lines for
- example. If you want to use PPP over phone lines or other
- asynchronous serial lines, you need to say Y (or M) here and also to
- the next option, "PPP support for async serial ports". For PPP over
- synchronous lines, you should say Y (or M) here and to "Support
- synchronous PPP", below.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- If you said Y to "Version information on all symbols" above, then
- you cannot compile the PPP driver into the kernel; you can then only
- compile it as a module. The module will be called ppp_generic.o.
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>.
-
-config PPP_MULTILINK
- bool "PPP multilink support (EXPERIMENTAL)"
- depends on PPP && EXPERIMENTAL
-
-config PPP_FILTER
- bool "PPP filtering"
- depends on PPP && FILTER
-
-config PPP_ASYNC
- tristate "PPP support for async serial ports"
- depends on PPP
-
-config PPP_SYNC_TTY
- tristate "PPP support for sync tty ports"
- depends on PPP
-
-config PPP_DEFLATE
- tristate "PPP Deflate compression"
- depends on PPP
-
-config PPP_BSDCOMP
- tristate "PPP BSD-Compress compression"
- depends on PPP
-
-config PPPOE
- tristate "PPP over Ethernet (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PPP
-
-config EQUALIZER
- tristate "EQL (serial line load balancing) support"
- depends on NETDEVICES
- ---help---
- If you have two serial connections to some other computer (this
- usually requires two modems and two telephone lines) and you use
- SLIP (the protocol for sending Internet traffic over telephone
- lines) or PPP (a better SLIP) on them, you can make them behave like
- one double speed connection using this driver. Naturally, this has
- to be supported at the other end as well, either with a similar EQL
- Linux driver or with a Livingston Portmaster 2e.
-
- Say Y if you want this and read
- <file:Documentation/networking/eql.txt>. You may also want to read
- section 6.2 of the NET-3-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called eql.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>. If
- unsure, say N.
-
-config ARIADNE
- tristate "Ariadne support"
- depends on NETDEVICES && ZORRO
- help
- If you have a Village Tronic Ariadne Ethernet adapter, say Y.
- Otherwise, say N.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called ariadne.o. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
-
-config ARIADNE2
- tristate "Ariadne II support"
- depends on NETDEVICES && ZORRO
- help
- This driver is for the Village Tronic Ariadne II and the Individual
- Computers X-Surf Ethernet cards. If you have such a card, say Y.
- Otherwise, say N.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ariadne2.o. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
-
-config A2065
- tristate "A2065 support"
- depends on NETDEVICES && ZORRO
- help
- If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
- say N.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called a2065.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
-
-config HYDRA
- tristate "Hydra support"
- depends on NETDEVICES && ZORRO
- help
- If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called hydra.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on NETDEVICES && AMIGA_PCMCIA
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called apne.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
-
-config APOLLO_ELPLUS
- tristate "Apollo 3c505 support"
- depends on NETDEVICES && APOLLO
- help
- Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
- If you don't have one made for Apollos, you can use one from a PC,
- except that your Apollo won't be able to boot from it (because the
- code in the ROM will be for a PC).
-
-config MAC8390
- bool "Macintosh NS 8390 based ethernet cards"
- depends on NETDEVICES && MAC
- help
- If you want to include a driver to support Nubus or LC-PDS
- Ethernet cards using an NS8390 chipset or its equivalent, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
-
-config MACSONIC
- tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
- depends on NETDEVICES && MAC
- ---help---
- Support for NatSemi SONIC based Ethernet devices. This includes
- the onboard Ethernet in many Quadras as well as some LC-PDS,
- a few Nubus and all known Comm Slot Ethernet cards. If you have
- one of these say Y and read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. This module will
- be called macsonic.o.
-
-config SMC9194
- tristate "Macintosh SMC 9194 based ethernet cards"
- depends on NETDEVICES && MAC
- ---help---
- This is support for the SMC9xxx based Ethernet cards. Choose this
- option if you have a DELL laptop with the docking station, or
- another SMC9192/9194 based chipset. Say Y if you want it compiled
- into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.linuxdoc.org/docs.html#howto>.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc9194.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
-
-config MAC89x0
- tristate "Macintosh CS89x0 based ethernet cards"
- depends on NETDEVICES && MAC
- ---help---
- Support for CS89x0 chipset based Ethernet cards. If you have a
- Nubus or LC-PDS network (Ethernet) card of this type, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. This module will
- be called mac89x0.o.
-
-config MACMACE
- bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
- depends on NETDEVICES && MAC && EXPERIMENTAL
- help
- Support for the onboard AMD 79C940 MACE Ethernet controller used in
- the 660AV and 840AV Macintosh. If you have one of these Macintoshes
- say Y and read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
-
-config MVME147_NET
- tristate "MVME147 (Lance) Ethernet support"
- depends on NETDEVICES && MVME147
- help
- Support for the on-board Ethernet interface on the Motorola MVME147
- single-board computer. Say Y here to include the
- driver for this chip in your kernel. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
-
-config MVME16x_NET
- tristate "MVME16x Ethernet support"
- depends on NETDEVICES && MVME16x
- help
- This is the driver for the Ethernet interface on the Motorola
- MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
- driver for this chip in your kernel. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
-
-config BVME6000_NET
- tristate "BVME6000 Ethernet support"
- depends on NETDEVICES && BVME6000
- help
- This is the driver for the Ethernet interface on BVME4000 and
- BVME6000 VME boards. Say Y here to include the driver for this chip
- in your kernel. If you want to compile it as a module, say M here
- and read <file:Documentation/modules.txt>.
-
-config ATARILANCE
- tristate "Atari Lance support"
- depends on NETDEVICES && ATARI
- help
- Say Y to include support for several Atari Ethernet adapters based
- on the AMD Lance chipset: RieblCard (with or without battery), or
- PAMCard VME (also the version by Rhotron, with different addresses).
-
-config ATARI_BIONET
- tristate "BioNet-100 support"
- depends on NETDEVICES && ATARI && ATARI_ACSI!=n
- help
- Say Y to include support for BioData's BioNet-100 Ethernet adapter
- for the ACSI port. The driver works (has to work...) with a polled
- I/O scheme, so it's rather slow :-(
-
-config ATARI_PAMSNET
- tristate "PAMsNet support"
- depends on NETDEVICES && ATARI && ATARI_ACSI!=n
- help
- Say Y to include support for the PAMsNet Ethernet adapter for the
- ACSI port ("ACSI node"). The driver works (has to work...) with a
- polled I/O scheme, so it's rather slow :-(
-
-config SUN3LANCE
- tristate "Sun3/Sun3x on-board LANCE support"
- depends on NETDEVICES && (SUN3 || SUN3X)
- help
- Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
- featured an AMD Lance 10Mbit Ethernet controller on board; say Y
- here to compile in the Linux driver for this and enable Ethernet.
- General Linux information on the Sun 3 and 3x series (now
- discontinued) is at
- <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
- If you're not building a kernel for a Sun 3, say N.
-
-config SUN3_82586
- tristate "Sun3 on-board Intel 82586 support"
- depends on NETDEVICES && SUN3
- help
- This driver enables support for the on-board Intel 82586 based
- Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
- that this driver does not support 82586-based adapters on additional
- VME boards.
-
-config HPLANCE
- bool "HP on-board LANCE support"
- depends on NETDEVICES && HP300
- help
- If you want to use the builtin "LANCE" Ethernet controller on an
- HP300 machine, say Y here.
-
-config PLIP
- tristate "PLIP (parallel port) support"
- depends on NETDEVICES && Q40 && PARPORT
- ---help---
- PLIP (Parallel Line Internet Protocol) is used to create a
- reasonably fast mini network consisting of two (or, rarely, more)
- local machines. A PLIP link from a Linux box is a popular means to
- install a Linux distribution on a machine which doesn't have a
- CD-ROM drive (a minimal system has to be transferred with floppies
- first). The kernels on both machines need to have this PLIP option
- enabled for this to work.
-
- The PLIP driver has two modes, mode 0 and mode 1. The parallel
- ports (the connectors at the computers with 25 holes) are connected
- with "null printer" or "Turbo Laplink" cables which can transmit 4
- bits at a time (mode 0) or with special PLIP cables, to be used on
- bidirectional parallel ports only, which can transmit 8 bits at a
- time (mode 1); you can find the wiring of these cables in
- <file:Documentation/networking/PLIP.txt>. The cables can be up to
- 15m long. Mode 0 works also if one of the machines runs DOS/Windows
- and has some PLIP software installed, e.g. the Crynwr PLIP packet
- driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
- and winsock or NCSA's telnet.
-
- If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
- as the NET-3-HOWTO, both available from
- <http://www.linuxdoc.org/docs.html#howto>. Note that the PLIP
- protocol has been changed and this PLIP driver won't work together
- with the PLIP support in Linux versions 1.0.x. This option enlarges
- your kernel by about 8 KB.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called plip.o. If unsure, say Y or M, in case you buy a laptop
- later.
-
-config NE2000
- tristate "NE2000/NE1000 support"
- depends on NETDEVICES && Q40 && m
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>. Many Ethernet cards
- without a specific driver are compatible with NE2000.
-
- If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 support", above. If you have a NE2000 card and are running on
- an MCA system (a bus system used on some IBM PS/2 computers and
- laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
- below.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ne.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
-
-endmenu
-
-
menu "Character devices"
config SERIAL
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jan 07 2003 - 22:00:18 EST