Linux version 2.4.20 (root@reddog) (gcc version 3.2.1) #1 Fri Dec 6 01:28:57 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS) BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32752 zone(0): 4096 pages. zone(1): 28656 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=linux ro root=301 Initializing CPU#0 Detected 650.128 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1297.61 BogoMIPS Memory: 126332k/131008k available (1730k kernel code, 4288k reserved, 623k data, 104k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: After generic, caps: 008031b5 808030b5 00000000 00000000 CPU: Common caps: 008031b5 808030b5 00000000 00000000 CPU: Centaur VIA Samuel stepping 03 Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/3074] at 00:11.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 C2, 2 throttling states ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found ACPI: Sleep Button (CM) found ACPI: Thermal Zone found pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD400BB-53DEA0, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive hdd: PCRW804, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c0396ea4, I/O limit 4095Mb (mask 0xffffffff) hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize loop: loaded (max 8 devices) ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PIONEER Model: DVD-ROM DVD-106 Rev: 1.22 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PHILIPS Model: PCRW804 Rev: 2,1 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 512.400 MB/sec 32regs : 286.400 MB/sec pII_mmx : 558.800 MB/sec p5_mmx : 596.400 MB/sec raid5: using function: p5_mmx (596.400 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 104k freed Adding Swap: 1714600k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal reiserfs: checking transaction log (device 03:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:04) ... Using r5 hash to sort names ReiserFS version 3.6.25 usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 11 for device 00:11.2 PCI: Sharing IRQ 11 with 00:09.2 PCI: Sharing IRQ 11 with 00:11.3 PCI: Sharing IRQ 11 with 00:11.4 uhci.c: USB UHCI at I/O 0xdc00, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:11.3 PCI: Sharing IRQ 11 with 00:09.2 PCI: Sharing IRQ 11 with 00:11.2 PCI: Sharing IRQ 11 with 00:11.4 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:11.4 PCI: Sharing IRQ 11 with 00:09.2 PCI: Sharing IRQ 11 with 00:11.2 PCI: Sharing IRQ 11 with 00:11.3 uhci.c: USB UHCI at I/O 0xe400, IRQ 11 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 11 for device 00:0a.0 PCI: Sharing IRQ 11 with 00:09.1 PCI: Sharing IRQ 11 with 00:11.5 eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xc8a5d000, 00:50:ba:c8:1c:12, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' PCI: Found IRQ 11 for device 00:09.2 PCI: Sharing IRQ 11 with 00:11.2 PCI: Sharing IRQ 11 with 00:11.3 PCI: Sharing IRQ 11 with 00:11.4 hcd.c: ehci-hcd @ 00:09.2, NEC Corporation USB 2.0 hcd.c: irq 11, pci mem c8a64000 usb.c: new USB bus registered, assigned bus number 4 ehci-hcd.c: USB 2.0 support enabled, EHCI rev 0.95 hub.c: USB hub found hub.c: 5 ports detected PCI: Found IRQ 11 for device 00:09.0 usb-ohci.c: USB OHCI at membase 0xc8a6c000, IRQ 11 usb-ohci.c: usb-00:09.0, NEC Corporation USB usb.c: new USB bus registered, assigned bus number 5 hub.c: USB hub found hub.c: 3 ports detected PCI: Found IRQ 11 for device 00:09.1 PCI: Sharing IRQ 11 with 00:0a.0 PCI: Sharing IRQ 11 with 00:11.5 usb-ohci.c: USB OHCI at membase 0xc8a6e000, IRQ 11 usb-ohci.c: usb-00:09.1, NEC Corporation USB (#2) usb.c: new USB bus registered, assigned bus number 6 hub.c: USB hub found hub.c: 2 ports detected es1370: version v0.37 time 03:23:54 Dec 6 2002 PCI: Found IRQ 11 for device 00:08.0 es1370: found adapter at io 0xd000 irq 11 es1370: features: joystick off, line in, mic impedance 0 keyboard: unknown scancode e0 2e keyboard: unknown scancode e0 2e usb-uhci.c: $Revision: 1.275 $ time 03:27:43 Dec 6 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1. nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002 keyboard: unknown scancode e0 6c keyboard: unknown scancode e0 20 keyboard: unknown scancode e0 6c keyboard: unknown scancode e0 20 es1370: unloading Via 686a/8233/8235 audio driver 1.9.1-ac2 PCI: Found IRQ 11 for device 00:11.5 PCI: Sharing IRQ 11 with 00:09.1 PCI: Sharing IRQ 11 with 00:0a.0 via82cxxx: Six channel audio available PCI: Setting latency timer of device 00:11.5 to 64 ac97_codec: AC97 Audio codec, id: ICE17(ICE1232) via82cxxx: board #1 at 0xE800, IRQ 11 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 94M agpgart: Detected Via Apollo Pro266 chipset agpgart: AGP aperture is 64M @ 0xe0000000 NVRM: AGPGART: VIA chipset NVRM: AGPGART: aperture: 64M @ 0xe0000000 NVRM: AGPGART: aperture mapped from 0xe0000000 to 0xc9bf0000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 NVRM: AGPGART: freed 16 pages NVRM: AGPGART: backend released NVRM: AGPGART: VIA chipset NVRM: AGPGART: aperture: 64M @ 0xe0000000 NVRM: AGPGART: aperture mapped from 0xe0000000 to 0xc9bf0000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 NVRM: AGPGART: freed 16 pages NVRM: AGPGART: backend released NVRM: AGPGART: VIA chipset NVRM: AGPGART: aperture: 64M @ 0xe0000000 NVRM: AGPGART: aperture mapped from 0xe0000000 to 0xc9bf0000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 NVRM: AGPGART: freed 16 pages NVRM: AGPGART: backend released