Code originally by James Cleverdon. Abstracts out some sections
that were switched by clustered_apic_mode into the following functions:
apic_id_registered()
init_apic_ldr()
multi_timer_check()
Changes the return check in balance_irq from testing clustered_apic_mode
to testing "no_balance_irq" to be more general.
The removal of:
entry.dest.logical.logical_dest = TARGET_CPUS;
is because it's a duplicate (we do it twice in the same function for
no reason).
diff -urpN -X /home/fletch/.diff.exclude 11-numaq1/arch/i386/kernel/apic.c 12-numaq2/arch/i386/kernel/apic.c
--- 11-numaq1/arch/i386/kernel/apic.c Sun Dec 22 12:08:42 2002
+++ 12-numaq2/arch/i386/kernel/apic.c Sun Dec 22 12:09:41 2002
@@ -311,11 +311,9 @@ void __init setup_local_APIC (void)
__error_in_apic_c();
/*
- * Double-check wether this APIC is really registered.
- * This is meaningless in clustered apic mode, so we skip it.
+ * Double-check whether this APIC is really registered.
*/
- if (!clustered_apic_mode &&
- !test_bit(GET_APIC_ID(apic_read(APIC_ID)), &phys_cpu_present_map))
+ if (!apic_id_registered())
BUG();
/*
@@ -323,21 +321,7 @@ void __init setup_local_APIC (void)
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
-
- if (!clustered_apic_mode) {
- /*
- * In clustered apic mode, the firmware does this for us
- * Put the APIC into flat delivery mode.
- * Must be "all ones" explicitly for 82489DX.
- */
- apic_write_around(APIC_DFR, APIC_DFR_VALUE);
-
- /*
- * Set up the logical destination ID.
- */
- value = apic_read(APIC_LDR);
- apic_write_around(APIC_LDR, calculate_ldr(value));
- }
+ init_apic_ldr();
/*
* Set Task Priority to 'accept all'. We never change this
diff -urpN -X /home/fletch/.diff.exclude 11-numaq1/arch/i386/kernel/io_apic.c 12-numaq2/arch/i386/kernel/io_apic.c
--- 11-numaq1/arch/i386/kernel/io_apic.c Sun Dec 22 12:08:42 2002
+++ 12-numaq2/arch/i386/kernel/io_apic.c Sun Dec 22 12:09:41 2002
@@ -262,7 +262,7 @@ static inline void balance_irq(int irq)
irq_balance_t *entry = irq_balance + irq;
unsigned long now = jiffies;
- if (clustered_apic_mode)
+ if (no_balance_irq)
return;
if (unlikely(time_after(now, entry->timestamp + IRQ_BALANCE_INTERVAL))) {
@@ -740,7 +740,6 @@ void __init setup_IO_APIC_irqs(void)
if (irq_trigger(idx)) {
entry.trigger = 1;
entry.mask = 1;
- entry.dest.logical.logical_dest = TARGET_CPUS;
}
irq = pin_2_irq(idx, apic, pin);
@@ -748,7 +747,7 @@ void __init setup_IO_APIC_irqs(void)
* skip adding the timer int on secondary nodes, which causes
* a small but painful rift in the time-space continuum
*/
- if (clustered_apic_mode && (apic != 0) && (irq == 0))
+ if (multi_timer_check(apic, irq))
continue;
else
add_pin_to_irq(irq, apic, pin);
diff -urpN -X /home/fletch/.diff.exclude 11-numaq1/include/asm-i386/mach-default/mach_apic.h 12-numaq2/include/asm-i386/mach-default/mach_apic.h
--- 11-numaq1/include/asm-i386/mach-default/mach_apic.h Sun Dec 22 12:09:22 2002
+++ 12-numaq2/include/asm-i386/mach-default/mach_apic.h Sun Dec 22 12:09:41 2002
@@ -1,14 +1,6 @@
#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
-static inline unsigned long calculate_ldr(unsigned long old)
-{
- unsigned long id;
-
- id = 1UL << smp_processor_id();
- return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
-}
-
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#ifdef CONFIG_SMP
@@ -17,6 +9,8 @@ static inline unsigned long calculate_ld
#define TARGET_CPUS 0x01
#endif
+#define no_balance_irq (0)
+
#define APIC_BROADCAST_ID 0x0F
#define check_apicid_used(bitmap, apicid) (bitmap & (1 << apicid))
@@ -24,10 +18,38 @@ static inline void summit_check(char *oe
{
}
+static inline int apic_id_registered(void)
+{
+ return (test_bit(GET_APIC_ID(apic_read(APIC_ID)),
+ &phys_cpu_present_map));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+
+ apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+ apic_write_around(APIC_LDR, val);
+}
+
static inline void clustered_apic_check(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Flat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return 0;
}
static inline int cpu_present_to_apicid(int mps_cpu)
diff -urpN -X /home/fletch/.diff.exclude 11-numaq1/include/asm-i386/mach-numaq/mach_apic.h 12-numaq2/include/asm-i386/mach-numaq/mach_apic.h
--- 11-numaq1/include/asm-i386/mach-numaq/mach_apic.h Sun Dec 22 12:09:22 2002
+++ 12-numaq2/include/asm-i386/mach-numaq/mach_apic.h Sun Dec 22 12:09:41 2002
@@ -1,18 +1,12 @@
#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
-static inline unsigned long calculate_ldr(unsigned long old)
-{
- unsigned long id;
-
- id = 1UL << smp_processor_id();
- return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
-}
-
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#define TARGET_CPUS (0xf)
+#define no_balance_irq (1)
+
#define APIC_BROADCAST_ID 0x0F
#define check_apicid_used(bitmap, apicid) (bitmap & (1 << apicid))
@@ -20,10 +14,25 @@ static inline void summit_check(char *oe
{
}
+static inline int apic_id_registered(void)
+{
+ return (1);
+}
+
+static inline void init_apic_ldr(void)
+{
+ /* Already done in NUMA-Q firmware */
+}
+
static inline void clustered_apic_check(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"NUMA-Q", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return (apic != 0 && irq == 0);
}
static inline int cpu_present_to_apicid(int mps_cpu)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:31 EST