Hi everybody.
This patch fixes the
Ok, booting the kernel. [hangs]
problem with BIOSes that report E820 memory maps with zero-size entries.
Among the mainboards affected are
EPOX 4G4A+ (presumably)
EPOX 4BEA[-R]
Chaintech 9EJL .
In the past (kernels up to 2.4.20), these mainboards could only boot Linux
with explicit 'mem=' boot parameters.
Up to 2.4.20, a zero-size E820 memory region (eg 0xa0000 - 0xa0000)
reported by the BIOS causes 'sanitize_e820_map' to take the end of this
region as the start of another region, producing two overlapping regions
extending to the end of addressable memory. If the zero-size region is of
a higher type than 'usable RAM' (eg 'reserved'), this causes all memory
above the zero-size region to be marked unusable (leaving 640k as of the
above example -- the kernel fails to start at all).
The patch adds code to remove empty entries before sorting regions. It
was generated for a 2.4.20 kernel.
Best regards,
Alex
[ Please send answers to my Reply-To address.
I'm not subscribed to the kernel mailing list. ]
diff -ur linux-2.4.20/arch/i386/kernel/setup.c linux-2.4.20-nullmem/arch/i386/kernel/setup.c
--- linux-2.4.20/arch/i386/kernel/setup.c Fri Nov 29 00:53:09 2002
+++ linux-2.4.20-nullmem/arch/i386/kernel/setup.c Mon Dec 16 14:52:21 2002
@@ -71,6 +71,9 @@
* CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
* Dave Jones <davej@suse.de>, September, October 2001.
*
+ * Provisions for empty E820 memory regions (reported by certain BIOSes).
+ * Alex Achenbach <xela@slit.de>, December 2002.
+ *
*/
/*
@@ -501,7 +504,7 @@
int chgidx, still_changing;
int overlap_entries;
int new_bios_entry;
- int old_nr, new_nr;
+ int old_nr, new_nr, chg_nr;
int i;
/*
@@ -555,20 +558,24 @@
for (i=0; i < 2*old_nr; i++)
change_point[i] = &change_point_list[i];
- /* record all known change-points (starting and ending addresses) */
+ /* record all known change-points (starting and ending addresses),
+ omitting those that are for empty memory regions */
chgidx = 0;
for (i=0; i < old_nr; i++) {
- change_point[chgidx]->addr = biosmap[i].addr;
- change_point[chgidx++]->pbios = &biosmap[i];
- change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
- change_point[chgidx++]->pbios = &biosmap[i];
+ if (biosmap[i].size != 0) {
+ change_point[chgidx]->addr = biosmap[i].addr;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ }
}
+ chg_nr = chgidx; /* true number of change-points */
/* sort change-point list by memory addresses (low -> high) */
still_changing = 1;
while (still_changing) {
still_changing = 0;
- for (i=1; i < 2*old_nr; i++) {
+ for (i=1; i < chg_nr; i++) {
/* if <current_addr> > <last_addr>, swap */
/* or, if current=<start_addr> & last=<end_addr>, swap */
if ((change_point[i]->addr < change_point[i-1]->addr) ||
@@ -591,7 +598,7 @@
last_type = 0; /* start with undefined memory type */
last_addr = 0; /* start with 0 as last starting address */
/* loop through change-points, determining affect on the new bios map */
- for (chgidx=0; chgidx < 2*old_nr; chgidx++)
+ for (chgidx=0; chgidx < chg_nr; chgidx++)
{
/* keep track of all overlapping bios entries */
if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:26 EST