Re: pcibios functions left in m68knommu port

From: Greg KH (greg@kroah.com)
Date: Thu Dec 19 2002 - 12:42:36 EST


On Wed, Dec 18, 2002 at 10:48:42AM +1000, Greg Ungerer wrote:
> Greg KH wrote:
> >I just noticed the arch/m68knommu/kernel/comempci.c file, which contains
> >a lot of pcibios functions that are now removed from the rest of the
> >kernel. Are these present for any specific reason, or would you be
> >willing to take a patch removing them?
>
> Happy to take a patch.
> Most of that baggage has been carried through since that support
> was first coded (circa linux-2.0.38).

Great, here's a patch against 2.5.52 that removes the unneeded
functions. I think you might be able to remove a few of the static
variables in this file now too, but I don't want to break anything, as I
don't have a machine to test this on.

Hm, I think I have a uCsimm around here somewhere...

thanks,

greg k-h

# removed unused pcibios functions from the m68knommu code.

diff -Nru a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
--- a/arch/m68knommu/kernel/comempci.c Thu Dec 19 09:43:11 2002
+++ b/arch/m68knommu/kernel/comempci.c Thu Dec 19 09:43:11 2002
@@ -338,254 +338,6 @@
 
 /*****************************************************************************/
 
-int pcibios_present(void)
-{
- return(pci_bus_is_present);
-}
-
-/*****************************************************************************/
-
-int pcibios_read_config_dword(unsigned char bus, unsigned char dev,
- unsigned char offset, unsigned int *val)
-{
- volatile unsigned long *rp;
- unsigned long idsel, fnsel;
-
-#ifdef DEBUGPCI
- printk("pcibios_read_config_dword(bus=%x,dev=%x,offset=%x,val=%x)\n",
- bus, dev, offset, val);
-#endif
-
- if (bus || ((pci_slotmask & (0x1 << PCI_SLOT(dev))) == 0)) {
- *val = 0xffffffff;
- return(PCIBIOS_SUCCESSFUL);
- }
-
- rp = (volatile unsigned long *) COMEM_BASE;
- idsel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << ((dev >> 3) + 16));
- fnsel = (dev & 0x7) << 8;
-
- rp[LREG(COMEM_DAHBASE)] = idsel;
- *val = rp[LREG(COMEM_PCIBUS + (offset & 0xfc) + fnsel)];
-
-#if 1
- /* If we get back what we wrote, then nothing there */
- /* This is pretty dodgy, but, hey, what else do we do?? */
- if (!offset && (*val == ((idsel & 0xfffff000) | (offset & 0x00000fff))))
- *val = 0xffffffff;
-#endif
-
- return(PCIBIOS_SUCCESSFUL);
-}
-
-/*****************************************************************************/
-
-int pcibios_read_config_word(unsigned char bus, unsigned char dev,
- unsigned char offset, unsigned short *val)
-{
- volatile unsigned long *rp;
- volatile unsigned short *bp;
- unsigned long idsel, fnsel;
- unsigned char swapoffset;
-
-#ifdef DEBUGPCI
- printk("pcibios_read_config_word(bus=%x,dev=%x,offset=%x)\n",
- bus, dev, offset);
-#endif
-
- if (bus || ((pci_slotmask & (0x1 << PCI_SLOT(dev))) == 0)) {
- *val = 0xffff;
- return(PCIBIOS_SUCCESSFUL);
- }
-
- rp = (volatile unsigned long *) COMEM_BASE;
- bp = (volatile unsigned short *) COMEM_BASE;
- idsel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << ((dev >> 3) + 16));
- fnsel = (dev & 0x7) << 8;
- swapoffset = (offset & 0xfc) + (~offset & 0x02);
-
- rp[LREG(COMEM_DAHBASE)] = idsel;
- *val = bp[WREG(COMEM_PCIBUS + swapoffset + fnsel)];
-
- return(PCIBIOS_SUCCESSFUL);
-}
-
-/*****************************************************************************/
-
-int pcibios_read_config_byte(unsigned char bus, unsigned char dev,
- unsigned char offset, unsigned char *val)
-{
- volatile unsigned long *rp;
- volatile unsigned char *bp;
- unsigned long idsel, fnsel;
- unsigned char swapoffset;
-
-#ifdef DEBUGPCI
- printk("pcibios_read_config_byte(bus=%x,dev=%x,offset=%x)\n",
- bus, dev, offset);
-#endif
-
- if (bus || ((pci_slotmask & (0x1 << PCI_SLOT(dev))) == 0)) {
- *val = 0xff;
- return(PCIBIOS_SUCCESSFUL);
- }
-
- rp = (volatile unsigned long *) COMEM_BASE;
- bp = (volatile unsigned char *) COMEM_BASE;
- idsel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << ((dev >> 3) + 16));
- fnsel = (dev & 0x7) << 8;
- swapoffset = (offset & 0xfc) + (~offset & 0x03);
-
- rp[LREG(COMEM_DAHBASE)] = idsel;
- *val = bp[(COMEM_PCIBUS + swapoffset + fnsel)];
-
- return(PCIBIOS_SUCCESSFUL);
-}
-
-/*****************************************************************************/
-
-int pcibios_write_config_dword(unsigned char bus, unsigned char dev,
- unsigned char offset, unsigned int val)
-{
- volatile unsigned long *rp;
- unsigned long idsel, fnsel;
-
-#ifdef DEBUGPCI
- printk("pcibios_write_config_dword(bus=%x,dev=%x,offset=%x,val=%x)\n",
- bus, dev, offset, val);
-#endif
-
- if (bus || ((pci_slotmask & (0x1 << PCI_SLOT(dev))) == 0))
- return(PCIBIOS_SUCCESSFUL);
-
- rp = (volatile unsigned long *) COMEM_BASE;
- idsel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << ((dev >> 3) + 16));
- fnsel = (dev & 0x7) << 8;
-
- rp[LREG(COMEM_DAHBASE)] = idsel;
- rp[LREG(COMEM_PCIBUS + (offset & 0xfc) + fnsel)] = val;
- return(PCIBIOS_SUCCESSFUL);
-}
-
-/*****************************************************************************/
-
-int pcibios_write_config_word(unsigned char bus, unsigned char dev,
- unsigned char offset, unsigned short val)
-{
-
- volatile unsigned long *rp;
- volatile unsigned short *bp;
- unsigned long idsel, fnsel;
- unsigned char swapoffset;
-
-#ifdef DEBUGPCI
- printk("pcibios_write_config_word(bus=%x,dev=%x,offset=%x,val=%x)\n",
- bus, dev, offset, val);
-#endif
-
- if (bus || ((pci_slotmask & (0x1 << PCI_SLOT(dev))) == 0))
- return(PCIBIOS_SUCCESSFUL);
-
- rp = (volatile unsigned long *) COMEM_BASE;
- bp = (volatile unsigned short *) COMEM_BASE;
- idsel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << ((dev >> 3) + 16));
- fnsel = (dev & 0x7) << 8;
- swapoffset = (offset & 0xfc) + (~offset & 0x02);
-
- rp[LREG(COMEM_DAHBASE)] = idsel;
- bp[WREG(COMEM_PCIBUS + swapoffset + fnsel)] = val;
- return(PCIBIOS_SUCCESSFUL);
-}
-
-/*****************************************************************************/
-
-int pcibios_write_config_byte(unsigned char bus, unsigned char dev,
- unsigned char offset, unsigned char val)
-{
- volatile unsigned long *rp;
- volatile unsigned char *bp;
- unsigned long idsel, fnsel;
- unsigned char swapoffset;
-
-#ifdef DEBUGPCI
- printk("pcibios_write_config_byte(bus=%x,dev=%x,offset=%x,val=%x)\n",
- bus, dev, offset, val);
-#endif
-
- if (bus || ((pci_slotmask & (0x1 << PCI_SLOT(dev))) == 0))
- return(PCIBIOS_SUCCESSFUL);
-
- rp = (volatile unsigned long *) COMEM_BASE;
- bp = (volatile unsigned char *) COMEM_BASE;
- idsel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << ((dev >> 3) + 16));
- fnsel = (dev & 0x7) << 8;
- swapoffset = (offset & 0xfc) + (~offset & 0x03);
-
- rp[LREG(COMEM_DAHBASE)] = idsel;
- bp[(COMEM_PCIBUS + swapoffset + fnsel)] = val;
- return(PCIBIOS_SUCCESSFUL);
-}
-
-/*****************************************************************************/
-
-int pcibios_find_device(unsigned short vendor, unsigned short devid,
- unsigned short index, unsigned char *bus, unsigned char *dev)
-{
- unsigned int vendev, val;
- unsigned char devnr;
-
-#ifdef DEBUGPCI
- printk("pcibios_find_device(vendor=%04x,devid=%04x,index=%d)\n",
- vendor, devid, index);
-#endif
-
- if (vendor == 0xffff)
- return(PCIBIOS_BAD_VENDOR_ID);
-
- vendev = (devid << 16) | vendor;
- for (devnr = 0; (devnr < 32); devnr++) {
- pcibios_read_config_dword(0, devnr, PCI_VENDOR_ID, &val);
- if (vendev == val) {
- if (index-- == 0) {
- *bus = 0;
- *dev = devnr;
- return(PCIBIOS_SUCCESSFUL);
- }
- }
- }
-
- return(PCIBIOS_DEVICE_NOT_FOUND);
-}
-
-/*****************************************************************************/
-
-int pcibios_find_class(unsigned int class, unsigned short index,
- unsigned char *bus, unsigned char *dev)
-{
- unsigned int val;
- unsigned char devnr;
-
-#ifdef DEBUGPCI
- printk("pcibios_find_class(class=%04x,index=%d)\n", class, index);
-#endif
-
- /* FIXME: this ignores multi-function devices... */
- for (devnr = 0; (devnr < 128); devnr += 8) {
- pcibios_read_config_dword(0, devnr, PCI_CLASS_REVISION, &val);
- if ((val >> 8) == class) {
- if (index-- == 0) {
- *bus = 0;
- *dev = devnr;
- return(PCIBIOS_SUCCESSFUL);
- }
- }
- }
-
- return(PCIBIOS_DEVICE_NOT_FOUND);
-}
-
-/*****************************************************************************/
-
 /*
  * Local routines to interrcept the standard I/O and vector handling
  * code. Don't include this 'till now - initialization code above needs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:24 EST