Re: Problems with OnStream USB30 Tape drive on the USB ports on a FIC VA-503+ - VIA MVP3 Chipset

From: Kurt Garloff (garloff@suse.de)
Date: Wed Dec 18 2002 - 17:07:34 EST


Hi,

to me this looks like a general USB or a specific usb-storage (FreeCom)
problem. Please send details of your USB setup (lsusb) to the usb-storage
developers. See
http://www2.one-eyed-alien.net/~mdharm/linux-usb/

On Sun, Dec 15, 2002 at 08:32:19AM -0500, Linux Kernel Developer wrote:
[...]
> CPU: AMD-K6(tm) 3D processor stepping 0c
[...]
> ACPI: Core Subsystem version [20011018]
> ACPI: Subsystem enabled
[...]
> VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
[...]
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 17:41:15 Dec 11 2002
> usb-uhci.c: High bandwidth mode enabled
> PCI: Assigned IRQ 11 for device 00:07.2
> usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 11
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> hub.c: new USB device 00:07.2-2, assigned address 2
> usb.c: USB device 2 (vend/prod 0x7ab/0xfc01) is not claimed by any active
> driver.
> SCSI subsystem driver Revision: 1.00
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> scsi0 : SCSI emulation for USB Mass Storage devices
> Vendor: OnStream Model: USB30 Rev: 1.09
> Type: Sequential-Access ANSI SCSI revision: 02
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 2
> USB Mass Storage support registered.
> osst :I: Tape driver with OnStream support version 0.9.10
> osst :I: $Id: osst.c,v 1.65 2001/11/11 20:38:56 riede Exp $
> osst :I: Attached OnStream USB30 tape at scsi0, channel 0, id 0, lun 0 as
> osst0
> usb-uhci.c: interrupt, status 30, frame# 1939
> usb-uhci.c: Host controller halted, trying to restart.
> usb-uhci.c: interrupt, status 2, frame# 1927
> freecom reset called
> hub.c: already running port 2 disabled by hub (EMI?), re-enabling...
> usb.c: USB disconnect on device 00:07.2-2 address 2
> osst0:W: Warning 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
> osst0:I: This warning may be caused by your scsi controller,
> osst0:I: it has been reported with some Buslogic cards.
> osst0:W: Command with sense data: Info fld=0xa00 (nonstd), Current
> osst:ce:00: sns = 70 2
> Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
> osst0:W: Command with sense data: Info fld=0xa00 (nonstd), Current
> osst:ce:00: sns = 70 2
> Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
[...]

Regards,

-- 
Kurt Garloff  <garloff@suse.de>                          Eindhoven, NL
GPG key: See mail header, key servers                        SuSE Labs
SuSE Linux AG, Nuernberg, DE                            SCSI, Security


- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:21 EST