[patch][2.5] ad1848 pnp conversion + fixes

From: Zwane Mwaikambo (zwane@holomorphy.com)
Date: Mon Dec 16 2002 - 03:18:14 EST


This patch converts ad1848 to the new PnP layer and has been tested on an
opl3sa2 here, without it it's non function in pnp mode. I'm willing to
field bug reports, (problems might occur for the modular case later on).

The patch also fixes a number of deadlocks from the cli/sti conversions

Please apply

Index: linux-2.5.52/sound/oss/ad1848.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.52/sound/oss/ad1848.c,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 ad1848.c
--- linux-2.5.52/sound/oss/ad1848.c 16 Dec 2002 05:17:07 -0000 1.1.1.1
+++ linux-2.5.52/sound/oss/ad1848.c 16 Dec 2002 07:10:16 -0000
@@ -33,6 +33,7 @@
  * Alan Cox : Added CS4236->4239 identification
  * Daniel T. Cobra : Alernate config/mixer for later chips
  * Alan Cox : Merged chip idents and config code
+ * Zwane Mwaikambo : Converted to 2.5 PnP API
  *
  * TODO
  * APM save restore assist code on IBM thinkpad
@@ -47,7 +48,6 @@
 #include <linux/module.h>
 #include <linux/stddef.h>
 #include <linux/pm.h>
-#include <linux/isapnp.h>
 #include <linux/pnp.h>
 #include <linux/spinlock.h>

@@ -107,6 +107,9 @@

         /* Power management */
         struct pm_dev *pmdev;
+#ifdef CONFIG_PNP
+ struct pnp_dev *pnp_dev;
+#endif
 } ad1848_info;

 typedef struct ad1848_port_info
@@ -180,16 +183,11 @@

 #ifdef CONFIG_PNP
 static int isapnp = 1;
-static int isapnpjump = 0;
-static int reverse = 0;
-
 static int audio_activated = 0;
 #else
 static int isapnp = 0;
 #endif

-
-
 static int ad1848_open(int dev, int mode);
 static void ad1848_close(int dev);
 static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag);
@@ -207,17 +205,15 @@
 static void ad1848_tmr_reprogram(int dev);
 #endif

+/* has to be called with devc->lock held */
 static int ad_read(ad1848_info * devc, int reg)
 {
- unsigned long flags;
         int x;
         int timeout = 900000;

         while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */
                 timeout--;

- spin_lock_irqsave(&devc->lock,flags);
-
         if(reg < 32)
         {
                 outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
@@ -233,21 +229,18 @@
                 outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
                 x = inb(io_Indexed_Data(devc));
         }
- spin_unlock_irqrestore(&devc->lock,flags);

         return x;
 }

+/* has to be called with the devc->lock held */
 static void ad_write(ad1848_info * devc, int reg, int data)
 {
- unsigned long flags;
         int timeout = 900000;

         while (timeout > 0 && inb(devc->base) == 0x80) /* Are we initializing */
                 timeout--;

- spin_lock_irqsave(&devc->lock,flags);
-
         if(reg < 32)
         {
                 outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
@@ -263,7 +256,6 @@
                 outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
                 outb((unsigned char) (data & 0xff), io_Indexed_Data(devc));
         }
- spin_unlock_irqrestore(&devc->lock,flags);
 }

 static void wait_for_calibration(ad1848_info * devc)
@@ -307,10 +299,7 @@
          */

         for (i = 6; i < 8; i++)
- {
                 prev = devc->saved_regs[i] = ad_read(devc, i);
- }
-
 }

 static void ad_unmute(ad1848_info * devc)
@@ -319,37 +308,28 @@

 static void ad_enter_MCE(ad1848_info * devc)
 {
- unsigned long flags;
         int timeout = 1000;
         unsigned short prev;

         while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */
                 timeout--;

- spin_lock_irqsave(&devc->lock,flags);
-
         devc->MCE_bit = 0x40;
         prev = inb(io_Index_Addr(devc));
         if (prev & 0x40)
- {
- spin_unlock_irqrestore(&devc->lock,flags);
                 return;
- }
+
         outb((devc->MCE_bit), io_Index_Addr(devc));
- spin_unlock_irqrestore(&devc->lock,flags);
 }

 static void ad_leave_MCE(ad1848_info * devc)
 {
- unsigned long flags;
         unsigned char prev, acal;
         int timeout = 1000;

         while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */
                 timeout--;

- spin_lock_irqsave(&devc->lock,flags);
-
         acal = ad_read(devc, 9);

         devc->MCE_bit = 0x00;
@@ -357,14 +337,11 @@
         outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */

         if ((prev & 0x40) == 0) /* Not in MCE mode */
- {
- spin_unlock_irqrestore(&devc->lock,flags);
                 return;
- }
+
         outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */
         if (acal & 0x08) /* Auto calibration is enabled */
                 wait_for_calibration(devc);
- spin_unlock_irqrestore(&devc->lock,flags);
 }

 static int ad1848_set_recmask(ad1848_info * devc, int mask)
@@ -375,12 +352,9 @@
         mask &= devc->supported_rec_devices;

         /* Rename the mixer bits if necessary */
- for (i = 0; i < 32; i++)
- {
- if (devc->mixer_reroute[i] != i)
- {
- if (mask & (1 << i))
- {
+ for (i = 0; i < 32; i++) {
+ if (devc->mixer_reroute[i] != i) {
+ if (mask & (1 << i)) {
                                 mask &= ~(1 << i);
                                 mask |= (1 << devc->mixer_reroute[i]);
                         }
@@ -462,12 +436,9 @@
         }

         /* Rename the mixer bits back if necessary */
- for (i = 0; i < 32; i++)
- {
- if (devc->mixer_reroute[i] != i)
- {
- if (mask & (1 << devc->mixer_reroute[i]))
- {
+ for (i = 0; i < 32; i++) {
+ if (devc->mixer_reroute[i] != i) {
+ if (mask & (1 << devc->mixer_reroute[i])) {
                                 mask &= ~(1 << devc->mixer_reroute[i]);
                                 mask |= (1 << i);
                         }
@@ -494,13 +465,11 @@
         mask = (1 << devc->mix_devices[dev][chn].nbits) - 1;
         shift = devc->mix_devices[dev][chn].bitpos;

- if (devc->mix_devices[dev][chn].mutepos == 8)
- { /* if there is no mute bit */
+ if (devc->mix_devices[dev][chn].mutepos == 8) {
+ /* if there is no mute bit */
                 mute = 0; /* No mute bit; do nothing special */
                 mutemask = ~0; /* No mute bit; do nothing special */
- }
- else
- {
+ } else {
                 mute = (set_mute_bit << devc->mix_devices[dev][chn].mutepos);
                 mutemask = ~(1 << devc->mix_devices[dev][chn].mutepos);
         }
@@ -600,9 +569,10 @@
 {
         int i;
         char name[32];
+ unsigned long flags;

+ spin_lock_irqsave(&devc->lock, flags);
         devc->mix_devices = &(ad1848_mix_devices[0]);
-
         sprintf(name, "%s_%d", devc->chip_name, nr_ad1848_devs);

         for (i = 0; i < 32; i++)
@@ -656,12 +626,11 @@

         devc->levels = load_mixer_volumes(name, default_mixer_levels, 1);

- for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
- {
+ for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
                 if (devc->supported_devices & (1 << i))
                         ad1848_mixer_set(devc, i, devc->levels[i]);
         }
-
+
         ad1848_set_recmask(devc, SOUND_MASK_MIC);

         devc->mixer_output_port = devc->levels[31] | AUDIO_HEADPHONE | AUDIO_LINE_OUT;
@@ -679,13 +648,15 @@
                 /* Enable surround mode and SB16 mixer */
                 ad_write(devc, 16, 0x60);
         }
+ spin_unlock_irqrestore(&devc->lock, flags);
 }

 static int ad1848_mixer_ioctl(int dev, unsigned int cmd, caddr_t arg)
 {
         ad1848_info *devc = mixer_devs[dev]->devc;
+ unsigned long flags;
         int val;
-
+
         if (cmd == SOUND_MIXER_PRIVATE1)
         {
                 if (get_user(val, (int *)arg))
@@ -697,10 +668,12 @@
                         devc->mixer_output_port = val;
                         val |= AUDIO_HEADPHONE | AUDIO_LINE_OUT; /* Always on */
                         devc->mixer_output_port = val;
+ spin_lock_irqsave(&devc->lock, flags);
                         if (val & AUDIO_SPEAKER)
                                 ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */
                         else
                                 ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */
+ spin_unlock_irqrestore(&devc->lock, flags);
                 }
                 val = devc->mixer_output_port;
                 return put_user(val, (int *)arg);
@@ -720,13 +693,17 @@
                                 case SOUND_MIXER_RECSRC:
                                         if (get_user(val, (int *)arg))
                                                 return -EFAULT;
+ spin_lock_irqsave(&devc->lock, flags);
                                         val = ad1848_set_recmask(devc, val);
+ spin_unlock_irqrestore(&devc->lock, flags);
                                         break;

                                 default:
                                         if (get_user(val, (int *)arg))
                                         return -EFAULT;
+ spin_lock_irqsave(&devc->lock, flags);
                                         val = ad1848_mixer_set(devc, cmd & 0xff, val);
+ spin_unlock_irqrestore(&devc->lock, flags);
                                         break;
                         }
                         return put_user(val, (int *)arg);
@@ -977,7 +954,7 @@
 {
         ad1848_info *devc;
         ad1848_port_info *portc;
- unsigned long flags;
+ unsigned long flags;

         if (dev < 0 || dev >= num_audiodevs)
                 return -ENXIO;
@@ -985,18 +962,16 @@
         devc = (ad1848_info *) audio_devs[dev]->devc;
         portc = (ad1848_port_info *) audio_devs[dev]->portc;

- spin_lock_irqsave(&devc->lock,flags);
- if (portc->open_mode || (devc->open_mode & mode))
- {
- spin_unlock_irqrestore(&devc->lock,flags);
+ spin_lock_irqsave(&devc->lock, flags);
+ if (portc->open_mode || (devc->open_mode & mode)) {
+ spin_unlock_irqrestore(&devc->lock, flags);
                 return -EBUSY;
         }
         devc->dual_dma = 0;

         if (audio_devs[dev]->flags & DMA_DUPLEX)
- {
                 devc->dual_dma = 1;
- }
+
         devc->intr_active = 0;
         devc->audio_mode = 0;
         devc->open_mode |= mode;
@@ -1007,10 +982,10 @@
                 devc->record_dev = dev;
         if (mode & OPEN_WRITE)
                 devc->playback_dev = dev;
- spin_unlock_irqrestore(&devc->lock,flags);
 /*
  * Mute output until the playback really starts. This decreases clicking (hope so).
  */
+ spin_unlock_irqrestore(&devc->lock, flags);
         ad_mute(devc);

         return 0;
@@ -1018,23 +993,24 @@

 static void ad1848_close(int dev)
 {
- unsigned long flags;
         ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
+ unsigned long flags;

         DEB(printk("ad1848_close(void)\n"));
-
- spin_lock_irqsave(&devc->lock,flags);
-
+
+ spin_lock_irqsave(&devc->lock, flags);
         devc->intr_active = 0;
+ spin_unlock_irqrestore(&devc->lock, flags);
+
         ad1848_halt(dev);

+ spin_lock_irqsave(&devc->lock, flags);
         devc->audio_mode = 0;
         devc->open_mode &= ~portc->open_mode;
         portc->open_mode = 0;
-
+ spin_unlock_irqrestore(&devc->lock, flags);
         ad_unmute(devc);
- spin_unlock_irqrestore(&devc->lock,flags);
 }

 static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag)
@@ -1111,13 +1087,10 @@
         }
         spin_lock_irqsave(&devc->lock,flags);

- if (devc->model == MD_1848)
- {
+ if (devc->model == MD_1848) {
                   ad_write(devc, 15, (unsigned char) (cnt & 0xff));
                   ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
- }
- else
- {
+ } else {
                   ad_write(devc, 31, (unsigned char) (cnt & 0xff));
                   ad_write(devc, 30, (unsigned char) ((cnt >> 8) & 0xff));
         }
@@ -1184,15 +1157,13 @@
         ad_leave_MCE(devc); /*
                                  * Starts the calibration process.
                                  */
- spin_unlock_irqrestore(&devc->lock,flags);
         devc->xfer_count = 0;
+ spin_unlock_irqrestore(&devc->lock,flags);

 #ifndef EXCLUDE_TIMERS
         if (dev == timer_installed && devc->timer_running)
                 if ((fs & 0x01) != (old_fs & 0x01))
- {
                         ad1848_tmr_reprogram(dev);
- }
 #endif
         ad1848_halt_output(dev);
         return 0;
@@ -1336,9 +1307,8 @@
         if (!(ad_read(devc, 9) & 0x02))
                 return; /* Capture not enabled */

- spin_lock_irqsave(&devc->lock,flags);
-
         ad_mute(devc);
+ spin_lock_irqsave(&devc->lock,flags);

         {
                 int tmout;
@@ -1372,9 +1342,9 @@
         if (!(ad_read(devc, 9) & 0x01))
                 return; /* Playback not enabled */

+ ad_mute(devc);
         spin_lock_irqsave(&devc->lock,flags);

- ad_mute(devc);
         {
                 int tmout;

@@ -1404,35 +1374,28 @@
 {
         ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
- unsigned long flags;
         unsigned char tmp, old;

- spin_lock_irqsave(&devc->lock,flags);
         state &= devc->audio_mode;
-
         tmp = old = ad_read(devc, 9);

- if (portc->open_mode & OPEN_READ)
- {
+ if (portc->open_mode & OPEN_READ) {
                   if (state & PCM_ENABLE_INPUT)
                           tmp |= 0x02;
                   else
                           tmp &= ~0x02;
         }
- if (portc->open_mode & OPEN_WRITE)
- {
+ if (portc->open_mode & OPEN_WRITE) {
                 if (state & PCM_ENABLE_OUTPUT)
                         tmp |= 0x01;
                 else
                         tmp &= ~0x01;
         }
         /* ad_mute(devc); */
- if (tmp != old)
- {
+ if (tmp != old) {
                   ad_write(devc, 9, tmp);
                   ad_unmute(devc);
         }
- spin_unlock_irqrestore(&devc->lock,flags);
 }

 static void ad1848_init_hw(ad1848_info * devc)
@@ -1580,11 +1543,7 @@
                 printk(KERN_ERR "ad1848 - Too many audio devices\n");
                 return 0;
         }
- if (check_region(io_base, 4))
- {
- printk(KERN_ERR "ad1848.c: Port %x not free.\n", io_base);
- return 0;
- }
+
         devc->base = io_base;
         devc->irq_ok = 0;
         devc->timer_running = 0;
@@ -1736,15 +1695,13 @@
                 *ad_flags = 0;

         tmp1 = ad_read(devc, 12);
- if (tmp1 & 0x80)
- {
+ if (tmp1 & 0x80) {
                 if (ad_flags)
                         *ad_flags |= AD_F_CS4248;

                 devc->chip_name = "CS4248"; /* Our best knowledge just now */
         }
- if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40))
- {
+ if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40)) {
                 /*
                  * CS4231 detected - is it?
                  *
@@ -1935,8 +1892,7 @@
         }

         DDB(printk("ad1848_detect() - step L\n"));
- if (ad_flags)
- {
+ if (ad_flags) {
                   if (devc->model != MD_1848)
                           *ad_flags |= AD_F_CS4231;
         }
@@ -1945,7 +1901,6 @@
         if (devc->model == MD_1848 && ad1847_flag)
                 devc->chip_name = "AD1847";

-
         if (sscape_flag == 1)
                 devc->model = MD_1845_SSCAPE;

@@ -1969,7 +1924,6 @@

         ad1848_port_info *portc = NULL;

- spin_lock_init(&devc->lock);
         devc->irq = (irq > 0) ? irq : 0;
         devc->open_mode = 0;
         devc->timer_ticks = 0;
@@ -2039,17 +1993,14 @@

         ad1848_init_hw(devc);

- if (irq > 0)
- {
+ if (irq > 0) {
                 devc->dev_no = my_dev;
- if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0)
- {
+ if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0) {
                         printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
                         /* Don't free it either then.. */
                         devc->irq = 0;
                 }
- if (capabilities[devc->model].flags & CAP_F_TIMER)
- {
+ if (capabilities[devc->model].flags & CAP_F_TIMER) {
 #ifndef CONFIG_SMP
                         int x;
                         unsigned char tmp = ad_read(devc, 16);
@@ -2066,8 +2017,7 @@

                         if (devc->timer_ticks == 0)
                                 printk(KERN_WARNING "ad1848: Interrupt test failed (IRQ%d)\n", irq);
- else
- {
+ else {
                                 DDB(printk("Interrupt test OK\n"));
                                 devc->irq_ok = 1;
                         }
@@ -2086,8 +2036,7 @@
                 ad1848_tmr_install(my_dev);
 #endif

- if (!share_dma)
- {
+ if (!share_dma) {
                 if (sound_alloc_dma(dma_playback, devc->name))
                         printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_playback);

@@ -2100,8 +2049,7 @@
                                      dev_name,
                                      &ad1848_mixer_operations,
                                      sizeof(struct mixer_operations),
- devc)) >= 0)
- {
+ devc)) >= 0) {
                 audio_devs[my_dev]->mixer_dev = e;
                 if (owner)
                         mixer_devs[e]->owner = owner;
@@ -2112,6 +2060,7 @@
 int ad1848_control(int cmd, int arg)
 {
         ad1848_info *devc;
+ unsigned long flags;

         if (nr_ad1848_devs < 1)
                 return -ENODEV;
@@ -2123,9 +2072,11 @@
                 case AD1848_SET_XTAL: /* Change clock frequency of AD1845 (only ) */
                         if (devc->model != MD_1845 || devc->model != MD_1845_SSCAPE)
                                 return -EINVAL;
+ spin_lock_irqsave(&devc->lock, flags);
                         ad_enter_MCE(devc);
                         ad_write(devc, 29, (ad_read(devc, 29) & 0x1f) | (arg << 5));
                         ad_leave_MCE(devc);
+ spin_unlock_irqrestore(&devc->lock, flags);
                         break;

                 case AD1848_MIXER_REROUTE:
@@ -2140,11 +2091,13 @@
                             !(devc->supported_rec_devices & (1 << o)))
                                 return -EINVAL;

- if (n == SOUND_MIXER_NONE)
- { /* Just hide this control */
+ if (n == SOUND_MIXER_NONE) {
+ /* Just hide this control */
+ spin_lock_irqsave(&devc->lock, flags);
                                 ad1848_mixer_set(devc, o, 0); /* Shut up it */
                                 devc->supported_devices &= ~(1 << o);
                                 devc->supported_rec_devices &= ~(1 << o);
+ spin_unlock_irqrestore(&devc->lock, flags);
                                 break;
                         }

@@ -2171,23 +2124,19 @@
         int i, mixer, dev = 0;
         ad1848_info *devc = NULL;

- for (i = 0; devc == NULL && i < nr_ad1848_devs; i++)
- {
- if (adev_info[i].base == io_base)
- {
+ for (i = 0; devc == NULL && i < nr_ad1848_devs; i++) {
+ if (adev_info[i].base == io_base) {
                         devc = &adev_info[i];
                         dev = devc->dev_no;
                 }
         }

- if (devc != NULL)
- {
+ if (devc != NULL) {
                 if(audio_devs[dev]->portc!=NULL)
                         kfree(audio_devs[dev]->portc);
                 release_region(devc->base, 4);

- if (!share_dma)
- {
+ if (!share_dma) {
                         if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
                                 free_irq(devc->irq, (void *)devc->dev_no);

@@ -2198,12 +2147,14 @@

                 }
                 mixer = audio_devs[devc->dev_no]->mixer_dev;
- if(mixer>=0)
+ if (mixer>=0)
                         sound_unload_mixerdev(mixer);

                 if (devc->pmdev)
                         pm_unregister(devc->pmdev);
-
+#ifdef CONFIG_PNP
+ put_device(&devc->pnp_dev->dev);
+#endif
                 nr_ad1848_devs--;
                 for ( ; i < nr_ad1848_devs ; i++)
                         adev_info[i] = adev_info[i+1];
@@ -2223,6 +2174,7 @@

         dev = (int)dev_id;
         devc = (ad1848_info *) audio_devs[dev]->devc;
+ spin_lock(&devc->lock);

 interrupt_again: /* Jump back here if int status doesn't reset */

@@ -2237,18 +2189,12 @@
         {
                 if (devc->model == MD_C930)
                 { /* 82C930 has interrupt status register in MAD16 register MC11 */
-
- spin_lock(&devc->lock);
-
                         /* 0xe0e is C930 address port
                          * 0xe0f is C930 data port
                          */
                         outb(11, 0xe0e);
                         c930_stat = inb(0xe0f);
                         outb((~c930_stat), 0xe0f);
-
- spin_unlock(&devc->lock);
-
                         alt_stat = (c930_stat << 2) & 0x30;
                 }
                 else if (devc->model != MD_1848)
@@ -2285,6 +2231,7 @@
         {
                   goto interrupt_again;
         }
+ spin_unlock(&devc->lock);
 }

 /*
@@ -2524,11 +2471,6 @@

         DDB(printk("Entered probe_ms_sound(%x, %d)\n", hw_config->io_base, hw_config->card_subtype));

- if (check_region(hw_config->io_base, 8))
- {
- printk(KERN_ERR "MSS: I/O port conflict\n");
- return 0;
- }
         if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */
         {
                 /* check_opl3(0x388, hw_config); */
@@ -2723,8 +2665,6 @@
         unsigned long xtal_nsecs; /* nanoseconds per xtal oscillator tick */
         unsigned long divider;

- spin_lock_irqsave(&devc->lock,flags);
-
         /*
          * Length of the timer interval (in nanoseconds) depends on the
          * selected crystal oscillator. Check this from bit 0x01 of I8.
@@ -2751,6 +2691,7 @@
         if (divider > 65535) /* Overflow check */
                 divider = 65535;

+ spin_lock_irqsave(&devc->lock,flags);
         ad_write(devc, 21, (divider >> 8) & 0xff); /* Set upper bits */
         ad_write(devc, 20, divider & 0xff); /* Set lower bits */
         ad_write(devc, 16, ad_read(devc, 16) | 0x40); /* Start the timer */
@@ -2819,13 +2760,8 @@

 static int ad1848_suspend(ad1848_info *devc)
 {
- unsigned long flags;
-
- spin_lock_irqsave(&devc->lock,flags);
-
         ad_mute(devc);

- spin_unlock_irqrestore(&devc->lock,flags);
         return 0;
 }

@@ -2833,9 +2769,8 @@
 {
         unsigned long flags;
         int mixer_levels[32], i;
-
- spin_lock_irqsave(&devc->lock,flags);

+ local_irq_save(flags);
         /* Thinkpad is a bit more of PITA than normal. The BIOS tends to
            restore it in a different config to the one we use. Need to
            fix this somehow */
@@ -2860,7 +2795,7 @@
                 bits = interrupt_bits[devc->irq];
                 if (bits == -1) {
                         printk(KERN_ERR "MSS: Bad IRQ %d\n", devc->irq);
- spin_unlock_irqrestore(&devc->lock,flags);
+ local_irq_restore(flags);
                         return -1;
                 }

@@ -2875,7 +2810,7 @@
                 outb((bits | dma_bits[devc->dma1] | dma2_bit), config_port);
         }

- spin_unlock_irqrestore(&devc->lock,flags);
+ local_irq_restore(flags);
         return 0;
 }

@@ -2924,13 +2859,7 @@

 #ifdef CONFIG_PNP
 MODULE_PARM(isapnp, "i");
-MODULE_PARM(isapnpjump, "i");
-MODULE_PARM(reverse, "i");
 MODULE_PARM_DESC(isapnp, "When set to 0, Plug & Play support will be disabled");
-MODULE_PARM_DESC(isapnpjump, "Jumps to a specific slot in the driver's PnP table. Use the source, Luke.");
-MODULE_PARM_DESC(reverse, "When set to 1, will reverse ISAPnP search order");
-
-struct pnp_dev *ad1848_dev = NULL;

 /* Please add new entries at the end of the table */
 static struct {
@@ -2952,10 +2881,12 @@
                 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
                 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100),
                 0, 0, 0, 1, 0},
- {"OPL3-SA2 WSS mode",
+ /* This is handled by the opl3sa2 driver
+ {"OPL3-SA2 WSS mode",
                 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
                 ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021),
                 1, 0, 0, 1, 1},
+ */
         {"Advanced Gravis InterWave Audio",
                 ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
                 ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000),
@@ -2963,137 +2894,90 @@
         {0}
 };

-static struct isapnp_device_id id_table[] __devinitdata = {
- { ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
- ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), 0 },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), 0 },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), 0 },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), 0 },
- { ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
- ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), 0 },
- {0}
+static const struct pnp_device_id ad1848_id_table[] __devinitdata = {
+ {.id = "CMI0001" },
+ {.id = "@@@0001" },
+ {.id = "CSC0000" },
+ {.id = "CSC0100" },
+ /* {.id = "YMH0021" }, */
+ {.id = "GRV0001" },
+ {.id = "GRV0000" },
+ {.id = ""}
 };

-MODULE_DEVICE_TABLE(isapnp, id_table);
+MODULE_DEVICE_TABLE(pnp, ad1848_id_table);

-static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev *dev)
+static int ad1848_isapnp_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *dev_id)
 {
- int err;
+ ad1848_info *priv;
+ int mss_io_index, irq_index, dma_index, dma2_index;

- /* Device already active? Let's use it */
- if(dev->active)
- return(dev);
+ if (nr_ad1848_devs >= MAX_AUDIO_DEV)
+ return -ENOSPC;

- if((err = pnp_activate_dev(dev)) < 0) {
- printk(KERN_ERR "ad1848: %s %s config failed (out of resources?)[%d]\n", devname, resname, err);
+ priv = &adev_info[nr_ad1848_devs];
+ priv->pnp_dev = pnp_dev;
+ pnp_set_drvdata(pnp_dev, priv);
+ get_device(&pnp_dev->dev);
+
+ mss_io_index = ad1848_isapnp_list[nr_ad1848_devs].mss_io;
+ irq_index = ad1848_isapnp_list[nr_ad1848_devs].irq;
+ dma_index = ad1848_isapnp_list[nr_ad1848_devs].dma;
+ dma2_index = ad1848_isapnp_list[nr_ad1848_devs].dma2;
+
+ cfg.io_base = pnp_dev->resource[mss_io_index].start;
+ cfg.irq = pnp_dev->irq_resource[irq_index].start;
+ cfg.dma = pnp_dev->dma_resource[dma_index].start;

- pnp_disable_dev(dev);
+ if (dma2_index != -1)
+ cfg.dma2 = pnp_dev->dma_resource[dma2_index].start;
+ else
+ cfg.dma2 = -1;

- return(NULL);
- }
+ printk(KERN_NOTICE "ad1848: ISAPnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n",
+ pnp_dev->name, cfg.io_base, cfg.irq, cfg.dma, cfg.dma2);
         audio_activated = 1;
- return(dev);
-}
-
-static struct pnp_dev *ad1848_init_generic(struct pnp_card *bus, struct address_info *hw_config, int slot)
-{
-
- /* Configure Audio device */
- if((ad1848_dev = pnp_find_dev(bus, ad1848_isapnp_list[slot].vendor, ad1848_isapnp_list[slot].function, NULL)))
- {
- if((ad1848_dev = activate_dev(ad1848_isapnp_list[slot].name, "ad1848", ad1848_dev)))
- {
- get_device(&ad1848_dev->dev);
- hw_config->io_base = ad1848_dev->resource[ad1848_isapnp_list[slot].mss_io].start;
- hw_config->irq = ad1848_dev->irq_resource[ad1848_isapnp_list[slot].irq].start;
- hw_config->dma = ad1848_dev->dma_resource[ad1848_isapnp_list[slot].dma].start;
- if(ad1848_isapnp_list[slot].dma2 != -1)
- hw_config->dma2 = ad1848_dev->dma_resource[ad1848_isapnp_list[slot].dma2].start;
- else
- hw_config->dma2 = -1;
- hw_config->card_subtype = ad1848_isapnp_list[slot].type;
- } else
- return(NULL);
- } else
- return(NULL);
-
- return(ad1848_dev);
-}

-static int __init ad1848_isapnp_init(struct address_info *hw_config, struct pnp_card *bus, int slot)
-{
- char *busname = bus->name[0] ? bus->name : ad1848_isapnp_list[slot].name;
-
- /* Initialize this baby. */
-
- if(ad1848_init_generic(bus, hw_config, slot)) {
- /* We got it. */
-
- printk(KERN_NOTICE "ad1848: ISAPnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n",
- busname,
- hw_config->io_base, hw_config->irq, hw_config->dma,
- hw_config->dma2);
- return 1;
- }
         return 0;
 }

-static int __init ad1848_isapnp_probe(struct address_info *hw_config)
+static void ad1848_isapnp_remove(struct pnp_dev *pnp_dev)
 {
- static int first = 1;
- int i;
-
- /* Count entries in sb_isapnp_list */
- for (i = 0; ad1848_isapnp_list[i].card_vendor != 0; i++);
- i--;
-
- /* Check and adjust isapnpjump */
- if( isapnpjump < 0 || isapnpjump > i) {
- isapnpjump = reverse ? i : 0;
- printk(KERN_ERR "ad1848: Valid range for isapnpjump is 0-%d. Adjusted to %d.\n", i, isapnpjump);
- }
-
- if(!first || !reverse)
- i = isapnpjump;
- first = 0;
- while(ad1848_isapnp_list[i].card_vendor != 0) {
- static struct pnp_card *bus = NULL;
-
- while ((bus = pnp_find_card(
- ad1848_isapnp_list[i].card_vendor,
- ad1848_isapnp_list[i].card_device,
- bus))) {
-
- if(ad1848_isapnp_init(hw_config, bus, i)) {
- isapnpjump = i; /* start next search from here */
- return 0;
- }
- }
- i += reverse ? -1 : 1;
- }
-
- return -ENODEV;
+ put_device(&pnp_dev->dev);
+ /* pnp_disable_dev(pnp_dev); does this belong here? -Zwane */
+ nr_ad1848_devs--;
 }
+
+static struct pnp_driver ad1848_driver = {
+ .name = "ad1848",
+ .id_table = ad1848_id_table,
+ .probe = ad1848_isapnp_probe,
+ .remove = ad1848_isapnp_remove,
+};
 #endif

 static int __init init_ad1848(void)
 {
+ int i;
         printk(KERN_INFO "ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996\n");

+ for (i = 0; i < MAX_AUDIO_DEV; i++)
+ spin_lock_init(&adev_info[i].lock);
+
 #ifdef CONFIG_PNP
- if(isapnp && (ad1848_isapnp_probe(&cfg) < 0) ) {
- printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n");
- isapnp = 0;
+ if (isapnp) { /* FIXME I don't think this override can work anymore... -Zwane */
+ /* On return our settings are in cfg */
+ pnp_register_driver(&ad1848_driver);
+ if (audio_activated == 0) {
+ printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n");
+ isapnp = 0;
+ }
         }
 #endif

- if(io != -1) {
- if( isapnp == 0 )
- {
+ if (io != -1) {
+ if ( isapnp == 0 ) {
                         if(irq == -1 || dma == -1) {
                                 printk(KERN_WARNING "ad1848: must give I/O , IRQ and DMA.\n");
                                 return -EINVAL;
@@ -3106,7 +2990,7 @@
                         cfg.card_subtype = type;
                 }

- if(!probe_ms_sound(&cfg))
+ if (!probe_ms_sound(&cfg))
                         return -ENODEV;
                 attach_ms_sound(&cfg, THIS_MODULE);
                 loaded = 1;
@@ -3116,15 +3000,11 @@

 static void __exit cleanup_ad1848(void)
 {
- if(loaded)
+ if (loaded)
                 unload_ms_sound(&cfg);

 #ifdef CONFIG_PNP
- if(ad1848_dev){
- if(audio_activated)
- pnp_disable_dev(ad1848_dev);
- put_device(&ad1848_dev->dev);
- }
+ pnp_unregister_driver(&ad1848_driver);
 #endif
 }

Index: linux-2.5.52/sound/oss/Makefile
===================================================================
RCS file: /build/cvsroot/linux-2.5.52/sound/oss/Makefile,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 Makefile
--- linux-2.5.52/sound/oss/Makefile 16 Dec 2002 05:17:05 -0000 1.1.1.1
+++ linux-2.5.52/sound/oss/Makefile 16 Dec 2002 05:52:23 -0000
@@ -13,6 +13,7 @@
 # Each configuration option enables a list of files.

 obj-$(CONFIG_SOUND_OSS) += sound.o
+obj-$(CONFIG_SOUND_MSS) += ad1848.o
 obj-$(CONFIG_SOUND_CS4232) += cs4232.o ad1848.o

 # Please leave it as is, cause the link order is significant !
@@ -24,7 +25,6 @@
 obj-$(CONFIG_SOUND_SSCAPE) += sscape.o ad1848.o mpu401.o
 obj-$(CONFIG_SOUND_MAD16) += mad16.o ad1848.o sb_lib.o uart401.o
 obj-$(CONFIG_SOUND_CS4232) += cs4232.o uart401.o
-obj-$(CONFIG_SOUND_MSS) += ad1848.o
 obj-$(CONFIG_SOUND_OPL3SA2) += opl3sa2.o ad1848.o mpu401.o
 obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o
 obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o

-- 
function.linuxpower.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:12 EST