Re: Sound: DMA (output) timed out - IRQ/DRQ config error?

From: Jos Hulzink (josh@stack.nl)
Date: Mon Nov 11 2002 - 16:36:26 EST


On Monday 11 November 2002 21:42, Karel Kulhavy wrote:
> I get Sound: DMA (output) timed out - IRQ/DRQ config error?
> On a PPro 200MHz (DELL OptiPlex Pro) with builting Soudblaster (OSS)
> and massive access to SCSI disk AHA 1524 (tar xzvf of a big archive)
>
> 7: 686036 XT-PIC soundblaster
> 10: 614871 XT-PIC aha152x
>
> I would be worth the effort to block interrupts within the drivers
> only on an absolutely necessary way. Or is it already happening?

Sounds to me you are causing the ISA bus to smoke... An ISA bus can only
handle at most 16 MB / s but this is a pure theoretical limit, 8 MB / s is a
more sane value. And when the SCSI controller fills the buffer of the disk it
is damn good possible your ISA bus is flooded with data for about 1/8 sec..

this shouldn't happen, but iMHO you should use a PCI SCSI controller if you do
"massive access" to disks...

Jos

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Nov 15 2002 - 22:00:23 EST