Hello there,
On 04 Nov 2002 12:50:47 +0000
Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> On Mon, 2002-11-04 at 10:54, Manuel Serrano wrote:
> > -----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
> > ALI15X3: chipset revision 196
> > ALI15X3: IDE controller on PCI bus 00 dev 80
> > ALI15X3: not 100% native mode: will probe irqs later
> > -----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
> >
> > Nothing more. At this point, the keyboard is ineffective. The only solution
> > is to switch off the computer.
>
> Should be fixed in the development tree already. Forcing ata66 might
> also make the problem go away. The ALi code in the existing kernels
> assumes ALi north and south bridges so comes apart completely on the
> crusoe boxes which have a transmeta virtual northbridge on the
> CPU/software itself.
I'm sorry to keep bothering all of you with this problem. I have tried
a new version of the kernel (2.4.20-pre10-ac2) and I'm afraid that it does
not fix the problem. I'm now able to compile and boot a kernel using the
specific IDE driver but I'm still enable to enable the DMA on the disk.
Here are the information I have a boot-time:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
owens:.../src/linux-2.4.20-pre10-ac2> dmesg | more
Linux version 2.4.20-pre10-ac2 (root@owens) (gcc version 2.95.4 20011002 (Debia
n prerelease)) #2 Mon Nov 4 21:12:53 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000eef0000 (usable)
BIOS-e820: 000000000eef0000 - 000000000eefc000 (ACPI data)
BIOS-e820: 000000000eefc000 - 000000000ef00000 (ACPI NVS)
BIOS-e820: 000000000ef00000 - 000000000f000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
240MB LOWMEM available.
On node 0 totalpages: 61440
zone(0): 4096 pages.
zone(1): 57344 pages.
zone(2): 0 pages.
Sony Vaio laptop detected.
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
Detected 860.161 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1717.04 BogoMIPS
Memory: 238540k/245760k available (985k kernel code, 4832k reserved, 440k data,
56k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=30057 max_file_pages=0 max_inodes=0 max_dentries=30057
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 512K (128 bytes/line)
CPU: Processor revision 1.4.1.0, 867 MHz
CPU: Code Morphing Software revision 4.3.0-9-197
CPU: 20020207 23:55 official release 4.3.0#7
CPU serial number disabled.
CPU: After generic, caps: 0080893f 0081813f 0000004e 00000000
CPU: Common caps: 0080893f 0081813f 0000004e 00000000
CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Scanning bus 00
Found 00:00 [1279/0395] 000600 00
Found 00:01 [1279/0396] 000500 00
Found 00:02 [1279/0397] 000500 00
Found 00:30 [10b9/5451] 000401 00
Found 00:38 [10b9/1533] 000601 00
Found 00:40 [10b9/5457] 000703 00
Found 00:48 [104c/8023] 000c00 00
Found 00:50 [10cf/2011] 000480 00
Found 00:58 [10ec/8139] 000200 00
Found 00:60 [1002/4c59] 000300 00
Found 00:78 [10b9/5237] 000c03 00
Found 00:80 [10b9/5229] 000101 00
Found 00:88 [10b9/7101] 000000 00
Found 00:90 [1180/0475] 000607 02
Found 00:a0 [10b9/5237] 000c03 00
Fixups for bus 00
Scanning behind PCI bridge 00:12.0, config 010100, pass 0
Scanning behind PCI bridge 00:12.0, config 010100, pass 1
Bus scan for 00 returning with max=01
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
PCI: Found IRQ 9 for device 00:06.0
PCI: Found IRQ 9 for device 00:08.0
PCI: Found IRQ 9 for device 00:0a.0
PCI: Sharing IRQ 9 with 00:0b.0
PCI: Sharing IRQ 9 with 00:12.0
PCI: Found IRQ 9 for device 00:0f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI e
nabled
PCI: Enabling device 00:08.0 (0000 -> 0003)
PCI: Found IRQ 9 for device 00:08.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (10b9,5457,104d,80ec)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
Real Time Clock Driver v1.10e
floppy0: no floppy controllers found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 00:10.0
PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using pci=b
iosirq.
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ALI15X3: simplex device with no drives: DMA disabled
ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
ALI15X3: simplex device with no drives: DMA disabled
ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
hda: IC25N030ATCS04-0, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/1768KiB Cache, CHS=3648/255/63
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 265064k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
...
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
At this point, it seems okay to me but then:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
owens:.../src/linux-2.4.20-pre10-ac2> sudo /sbin/hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 3648/255/63, sectors = 58605120, start = 0
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
Trying to enable dma is ineffective:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
owens:.../src/linux-2.4.20-pre10-ac2> sudo /sbin/hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
Even worse:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
owens:.../src/linux-2.4.20-pre10-ac2> sudo /sbin/hdparm -d1 -X66 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
setting xfermode to 66 (UltraDMA mode2)
zsh: segmentation fault sudo /sbin/hdparm -d1 -X66 /dev/hda
owens:.../src/linux-2.4.20-pre10-ac2> dmesg | tail -21
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
00000000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<00000000>] Not tainted
EFLAGS: 00010282
eax: 00000000 ebx: 00000042 ecx: 00000cf8 edx: 00000cfe
esi: c029d6b0 edi: c029d600 ebp: c19fd800 esp: c960bdd4
ds: 0018 es: 0018 ss: 0018
Process hdparm (pid: 1206, stackpage=c960b000)
Stack: c01a0b1f c029d6b0 00000042 00000000 00000042 c19fd800 c019e1fc c19fd800
00000001 4200000a c019e236 c029d6b0 00000042 c960be54 bffff564 c029d6b0
c960be54 c960be27 c029d6b0 00000056 0a420042 c01a314f c029d6b0 00000042
Call Trace: [<c01a0b1f>] [<c019e1fc>] [<c019e236>] [<c01a314f>] [<c01f44df>]
[<c012a9c3>] [<c0183f3e>] [<c01a7221>] [<c0180a29>] [<c0135fd0>] [<c013c595>]
[<c0106a4f>]
Code: Bad EIP value.
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
May be I'm doing something wrong. Here is the config file I'm using for
compiling the kernel:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
owens:.../src/linux-2.4.20-pre10-ac2> cat .config
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
CONFIG_MCRUSOE=y
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_F00F_WORKS_OK=y
# CONFIG_X86_MCE is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
# CONFIG_TCIC is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_IKCONFIG is not set
CONFIG_PM=y
CONFIG_ACPI=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUSMGR=m
CONFIG_ACPI_SYS=m
CONFIG_ACPI_CPU=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_AC=m
CONFIG_ACPI_EC=m
CONFIG_ACPI_CMBATT=m
CONFIG_ACPI_THERMAL=m
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_STATS is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NFORCE is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
#
# SCSI support
#
CONFIG_SCSI=m
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C bit-banging
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_TC35815 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_PCMCIA_WAVELAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_SERIO is not set
#
# Joysticks
#
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set
#
# DRM 4.1 drivers
#
CONFIG_DRM_NEW=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
CONFIG_VIDEO_MEYE=m
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
# CONFIG_SOUND_YMFPCI_LEGACY is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
CONFIG_USB_OHCI=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
CONFIG_USB_BLUETOOTH=m
# CONFIG_USB_MIDI is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
#
# USB Network adaptors
#
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
#
# Bluetooth support
#
CONFIG_BLUEZ=m
# CONFIG_BLUEZ_L2CAP is not set
# CONFIG_BLUEZ_SCO is not set
# CONFIG_BNEP_MC_FILTER is not set
# CONFIG_BNEP_PROTO_FILTER is not set
#
# Bluetooth device drivers
#
CONFIG_BLUEZ_HCIUSB=m
# CONFIG_BLUEZ_USB_ZERO_PACKET is not set
CONFIG_BLUEZ_HCIUART=m
# CONFIG_BLUEZ_HCIUART_H4 is not set
# CONFIG_BLUEZ_HCIDTL1 is not set
# CONFIG_BLUEZ_HCIBT3C is not set
# CONFIG_BLUEZ_HCIBLUECARD is not set
CONFIG_BLUEZ_HCIVHCI=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_PANIC_MORSE is not set
# CONFIG_DEBUG_SPINLOCK is not set
#
# Library routines
#
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
Should I be doing something different? For your information, the
kernel that comes with the RedHat8.0 (a 2.4.18 which seems to be
highly patched), the DMA are enabled. If it is needed I can provide a
dmesg trace for that kernel too. The problem with the RedHat kernel,
is that I cannot re-compile it. I can only use the plain pre-compiled
version that comes with the distribution. When I try to re-compile
there kernel I have syntax errors either on the kernel or the modules
or both.
One more time, sorry for bothering you with my Sony/ALi problem and
many thanks for your help. Please tell me if I can do something to
help.
-- Manuel-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
[4.] Kernel version (from /proc/version): =========================================
owens:.../project/bigloo> cat /proc/version Linux version 2.4.20-pre10-ac2 (root@owens) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Mon Nov 4 21:12:53 CET 2002
[5.] Output of Oops.. message (if applicable) with symbolic information: ========================================================================
NA
[6.] A small shell script or example program which triggers the problem: ========================================================================
NA
[7.] Environment ================
Sony Picturebook PCG-C1MHP, Crusoe TM5800, ide disk IC25N030ATCS04-0 ATA/ATAPI IDE : IDE PCI Bus Master ALi M5229
[7.1.] Software (add the output of the ver_linux script here): ==============================================================
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux owens 2.4.20-pre10-ac2 #2 Mon Nov 4 21:12:53 CET 2002 i686 Transmeta(tm) Crusoe(tm) Processor TM5800 GenuineTMx86 GNU/Linux Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11u mount 2.11u modutils 2.4.19 e2fsprogs 1.30-WIP pcmcia-cs 3.2.1 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 3.0.0 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 4.5.2 Modules Loaded trident ac97_codec soundcore ds yenta_socket pcmcia_core 8139too mii ospm_thermal ospm_battery ospm_ac_adapter ospm_busmgr usb-storage mousedev hid usb-ohci usbcore scsi_mod
[7.2.] Processor information (from /proc/cpuinfo): ==================================================
owens:.../src/linux-2.4.20-pre10-ac2> cat /proc/cpuinfo processor : 0 vendor_id : GenuineTMx86 cpu family : 6 model : 4 model name : Transmeta(tm) Crusoe(tm) Processor TM5800 stepping : 3 cpu MHz : 860.161 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr cx8 sep cmov mmx longrun lrti bogomips : 1717.04
[7.3.] Module information (from /proc/modules): ===============================================
owens:.../src/linux-2.4.20-pre10-ac2> cat /proc/modules trident 25556 1 (autoclean) ac97_codec 9640 0 (autoclean) [trident] soundcore 3364 3 (autoclean) [trident] ds 6152 1 yenta_socket 8864 1 pcmcia_core 33632 0 [ds yenta_socket] 8139too 13480 1 (autoclean) mii 2192 0 (autoclean) [8139too] ospm_thermal 5376 0 (unused) ospm_battery 5364 0 (unused) ospm_ac_adapter 1924 0 (unused) ospm_busmgr 10932 0 [ospm_thermal ospm_battery ospm_ac_adapter] usb-storage 21208 0 (unused) mousedev 3672 1 hid 17124 0 (unused) usb-ohci 17064 0 (unused) usbcore 54048 0 [usb-storage hid usb-ohci] scsi_mod 89560 0 [usb-storage]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem): ===========================================================================
owens:.../src/linux-2.4.20-pre10-ac2> cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-017f : Acer Laboratories Inc. [ALi] M5229 IDE 01f0-01ff : Acer Laboratories Inc. [ALi] M5229 IDE 01f0-01f7 : ide0 0376-0376 : Acer Laboratories Inc. [ALi] M5229 IDE 03c0-03df : vga+ 03f6-03f6 : Acer Laboratories Inc. [ALi] M5229 IDE 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 1400-140f : Acer Laboratories Inc. [ALi] M5229 IDE 1800-18ff : Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device 1800-18ff : ALi Audio Accelerator 1c00-1cff : Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller 2000-20ff : PCI device 10cf:2011 (Citicorp TTI) 2400-24ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ 2400-24ff : 8139too 2800-28ff : ATI Technologies Inc Radeon Mobility M6 LY 4000-40ff : PCI CardBus #01 4400-44ff : PCI CardBus #01 8000-803f : Acer Laboratories Inc. [ALi] M7101 PMU 8040-805f : Acer Laboratories Inc. [ALi] M7101 PMU
owens:.../src/linux-2.4.20-pre10-ac2> cat /proc/iomem 00000000-0009afff : System RAM 0009b000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000dc000-000dffff : reserved 000e0000-000e0fff : Acer Laboratories Inc. [ALi] USB 1.1 Controller (#2) 000e0000-000e0fff : usb-ohci 000f0000-000fffff : System ROM 00100000-0eeeffff : System RAM 00100000-001f662e : Kernel code 001f662f-002649df : Kernel data 0eef0000-0eefbfff : ACPI Tables 0eefc000-0eefffff : ACPI Non-volatile Storage 0ef00000-0effffff : System RAM 10000000-10000fff : Ricoh Co Ltd RL5c475 10400000-107fffff : PCI CardBus #01 10800000-10bfffff : PCI CardBus #01 e8000000-e80fffff : Transmeta Corporation LongRun Northbridge e8100000-e8100fff : Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device e8101000-e8101fff : Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller e8102000-e81027ff : Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) e8102800-e81028ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ e8102800-e81028ff : 8139too e8103000-e8103fff : Acer Laboratories Inc. [ALi] USB 1.1 Controller e8103000-e8103fff : usb-ohci e8104000-e8107fff : Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) e8110000-e811ffff : ATI Technologies Inc Radeon Mobility M6 LY e8200000-e82fffff : PCI device 10cf:2011 (Citicorp TTI) f0000000-f7ffffff : ATI Technologies Inc Radeon Mobility M6 LY fff80000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root) =============================================
owens:.../src/linux-2.4.20-pre10-ac2> lspci -vv 00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 02) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
00:00.1 RAM memory: Transmeta Corporation SDRAM controller Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:06.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device (rev 02) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at e8100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <available only to root>
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <available only to root>
00:08.0 Modem: Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller (prog-if 00 [Generic]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8101000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1c00 [size=256] Capabilities: <available only to root>
00:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22 1394a-2000 Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8102000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e8104000 (32-bit, non-prefetchable) [size=16K] Capabilities: <available only to root>
00:0a.0 Multimedia controller: Citicorp TTI: Unknown device 2011 Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2000 [disabled] [size=256] Region 1: Memory at e8200000 (32-bit, non-prefetchable) [disabled] [size=1M] Capabilities: <available only to root>
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2400 [size=256] Region 1: Memory at e8102800 (32-bit, non-prefetchable) [size=256] Capabilities: <available only to root>
00:0c.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 2800 [size=256] Region 2: Memory at e8110000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8103000 (32-bit, non-prefetchable) [size=4K] Capabilities: <available only to root>
00:10.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) (prog-if a0) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 0 Region 0: [virtual] I/O ports at 01f0 [size=16] Region 1: [virtual] I/O ports at 03f4 Region 2: [virtual] I/O ports at 0170 [size=16] Region 3: [virtual] I/O ports at 0374 Region 4: I/O ports at 1400 [size=16] Capabilities: <available only to root>
00:11.0 Non-VGA unclassified device: Acer Laboratories Inc. [ALi] M7101 PMU Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:12.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:14.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 000e0000 (32-bit, non-prefetchable) [size=4K] Capabilities: <available only to root>
owens:.../src/linux-2.4.20-pre10-ac2> sudo lspci -vv 00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 02) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
00:00.1 RAM memory: Transmeta Corporation SDRAM controller Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:06.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device (rev 02) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at e8100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [a0] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Modem: Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller (prog-if 00 [Generic]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8101000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1c00 [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22 1394a-2000 Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8102000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e8104000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:0a.0 Multimedia controller: Citicorp TTI: Unknown device 2011 Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2000 [disabled] [size=256] Region 1: Memory at e8200000 (32-bit, non-prefetchable) [disabled] [size=1M] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2400 [size=256] Region 1: Memory at e8102800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 2800 [size=256] Region 2: Memory at e8110000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8103000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) (prog-if a0) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 0 Region 0: [virtual] I/O ports at 01f0 [size=16] Region 1: [virtual] I/O ports at 03f4 Region 2: [virtual] I/O ports at 0170 [size=16] Region 3: [virtual] I/O ports at 0374 Region 4: I/O ports at 1400 [size=16] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Non-VGA unclassified device: Acer Laboratories Inc. [ALi] M7101 PMU Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:12.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:14.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 000e0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 07 2002 - 22:00:36 EST