> > 2.5.45 doesn't boot for me. I'm using a initrd to load some modules.
[ ... ]
> > I can hook up a serial console to grab the exact messages if needed.
>
> Please, do.
Here we go.
Gerd
Linux version 2.5.45 (kraxel@bogomips) (gcc version 3.2) #2 Thu Oct 31 18:54:13 CET 2002
Video mode to be used for restore is f07
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262140
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32764 pages, LIFO batch:7
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=2.5.45 ro root=306 console=ttyS0,115200n8 console=tty0
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 451.034 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 890.88 BogoMIPS
Memory: 1034424k/1048560k available (1155k kernel code, 13208k reserved, 956k data, 112k init, 131056k highmem)
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 450.0946 MHz.
..... host bus clock speed is 100.0210 MHz.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.9 (c) Adam Belay
PCI: PCI BIOS revision 2.10 entry at 0xf08b0, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:04.0
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
slab: reap timer started for cpu 0
Starting kswapd
highmem bounce pool size: 64 pages
aio_setup: sizeof(struct page) = 40
Journalled Block Device driver loaded
Capability LSM initialized
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
[c1a16040] eventpoll: driver installed.
Real Time Clock Driver v1.11
Non-volatile memory driver v1.2
block request queues:
128 requests per read queue
128 requests per write queue
8 requests per batch
enter congestion at 31
exit congestion at 33
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-305040, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive
hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=5005/255/63, UDMA(33)
hda: hda1 hda2 < hda5 hda6 hda7 > hda4
hda4: <bsd: hda8 hda9 hda10 hda11 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 270k freed
------------[ cut here ]------------
kernel BUG at fs/block_dev.c:370!
invalid operand: 0000
CPU: 0
EIP: 0060:[<c0149c4b>] Not tainted
EFLAGS: 00010202
EIP is at bdput+0x1b/0x90
eax: c0302701 ebx: 00000001 ecx: f7dd5678 edx: 00000001
esi: f7dd5660 edi: f7dd5660 ebp: f7dd5678 esp: f7fa5eac
ds: 0068 es: 0068 ss: 0068
Process swapper (pid: 1, threadinfo=f7fa4000 task=c1a16040)
Stack: f7dd5678 c0144583 00000001 00000000 f7dd5660 c014a620 f7dd5660 00000077
c1b3ac00 f7de0100 00000000 f7dcd820 f7ff6120 f7de0340 f7dccf40 c014408a
f7dd5660 00000000 f7dcd820 c02cd260 00000000 00000000 c0141d8d f7dcd820
Call Trace:
[<c0144583>] sync_blockdev+0x33/0x50
[<c014a620>] blkdev_put+0xc0/0x180
[<c014408a>] __fput+0xda/0xe0
[<c0141d8d>] filp_close+0x4d/0x80
[<c0141e10>] sys_close+0x50/0x60
[<c01091b3>] syscall_call+0x7/0xb
[<c01053d8>] prepare_namespace+0x148/0x1c0
[<c010506f>] init+0x2f/0x150
[<c0105040>] init+0x0/0x150
[<c010730d>] kernel_thread_helper+0x5/0x18
Code: 0f 0b 72 01 c5 fb 22 c0 8b 56 04 8d 7e 28 8b 06 89 02 8b 5e
<0>Kernel panic: Attempted to kill init!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:55 EST