I have one machine rsync'ing a debian mirror through another machine
which runs a HTTPS proxy - rsync can use the HTTP CONNECT method to
proxy-connected to a remote rsyncd.
On the gateway machine, the proxy consistantly hangs in a write().
I've replaced the squid proxy with a simple perl script + nc to
make sure it isn't a squid-related problem..
# netstat -t | grep ftp.debian.nl
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 70832 14480 cust.94.89.adsl.c:33876 ftp.debian.nl:rsync ESTABLISHED
# ps -eo pid,tt,user,fname,tmout,f,wchan | grep nc
26782 ? nobody nc - 100 wait_for_tcp_memory
# strace -fp 26782
write(3, "\236\3754\"OU\331\6\36d\33;\270\3776\221\21\364Z\370/\346"..., 3384 <unfinished ...>
# tcpdump -v -e -i eth1 -n host ftp.debian.nl
tcpdump: listening on eth1
17:36:40.946370 0:10:67:0:f8:8f 0:d0:b7:b2:67:82 0800 66: 195.64.82.85.873 > 195.64.94.89.33876: . [tcp sum ok] ack 2887846970 win 0 <nop,nop,timestamp 77491485 14953830> (DF) (ttl 61, id 19377, len 52)
17:36:40.946431 0:d0:b7:b2:67:82 0:10:67:0:f8:8f 0800 66: 195.64.94.89.33876 > 195.64.82.85.873: . [tcp sum ok] ack 1 win 0 <nop,nop,timestamp 14965835 77480589> (DF) (ttl 64, id 30547, len 52)
17:36:51.985379 0:d0:b7:b2:67:82 0:10:67:0:f8:8f 0800 66: 195.64.94.89.33876 > 195.64.82.85.873: . [tcp sum ok] ack 1 win 0 <nop,nop,timestamp 14966939 77480589> (DF) (ttl 64, id 30548, len 52)
17:36:52.032399 0:10:67:0:f8:8f 0:d0:b7:b2:67:82 0800 66: 195.64.82.85.873 > 195.64.94.89.33876: . [tcp sum ok] ack 1 win 0 <nop,nop,timestamp 77492593 14965835> (DF) (ttl 61, id 19378, len 52)
17:38:40.984930 0:10:67:0:f8:8f 0:d0:b7:b2:67:82 0800 66: 195.64.82.85.873 > 195.64.94.89.33876: . [tcp sum ok] ack 1 win 0 <nop,nop,timestamp 77503488 14965835> (DF) (ttl 61, id 19379, len 52)
17:38:40.984987 0:d0:b7:b2:67:82 0:10:67:0:f8:8f 0800 66: 195.64.94.89.33876 > 195.64.82.85.873: . [tcp sum ok] ack 1 win 0 <nop,nop,timestamp 14977838 77492593> (DF) (ttl 64, id 30549, len 52)
.. etc. It never recovers from this.
The machine has 2 eepro100 network cards. One is connected to the
office network (which has its own 2 mbit connected to the outside
world), the other is connected to an ADSL 8 mbit/sec line. Both
connections to the outside world show the same problem. I've tried
both eepro100 and e100 drivers with the same results. 2.4.20-pre11
and 2.4.19 both behave the same. There is no firewall in the
path anywhere. And it doesn't matter which remote
rsync server I used, the connection always eventually hangs.
Wait - I do have a dual routing table setup, so that traffic originating
from the ADSL IP goes out over the ADSL line:
# ip rule show
0: from all lookup local
32700: from 195.64.94.89 lookup adsl
32766: from all lookup main
32767: from all lookup default
# ip route show table adsl
default via 195.64.94.1 dev eth1
The machine is a PII/300 with 192 MB of RAM, of which it has
plenty free.
What can this be ? Esp. the netstat output looks weird.
Mike.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:42 EST