Re: tg3 and Netgear GA302T x 2 locks machine

From: Ben Greear (greearb@candelatech.com)
Date: Sat Oct 05 2002 - 00:47:26 EST

Next message: Ben Greear: "Re: tg3 and Netgear GA302T x 2 locks machine"
Previous message: Milton D. Miller II: "initramfs work"
In reply to: David S. Miller: "Re: tg3 and Netgear GA302T x 2 locks machine"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

David S. Miller wrote:
> From: Ben Greear <greearb@candelatech.com>
> Date: Thu, 03 Oct 2002 21:19:37 -0700
>
> Got my two new Netgear GA302t nics today. They seem to use the
> tg3 driver....
>
> I put them into the 64/66 slots on my Tyan dual amd motherboard..
> Running kernel 2.4.20-pre8
>
> You reported the other week problems with two Acenic's in
> this same machine right? The second Acenic wouldn't even probe
> properly. And the two Acenic's were identical.
>
> I see a pattern developing... :-)
>

Yep, one of my 64-bit PCI slots only seems to work with Intel NICs.
Go figure.

At any rate, I have 4 32-bit slots, and they seem to work, at
least long enough for the driver to puke messages and hard-lock my
machine ;)

If you think this NIC should work with the tg3, then I can change
them to a completely other machine, btw.

Ben

-- Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Ben Greear: "Re: tg3 and Netgear GA302T x 2 locks machine"
Previous message: Milton D. Miller II: "initramfs work"
In reply to: David S. Miller: "Re: tg3 and Netgear GA302T x 2 locks machine"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:49 EST