> > > > Once booted:
> > > >
> > > > Hot plugging either the dedicated trackball or a PS/2 mouse generates a message on connection:
> > >
> > > Good, this is expected.
> > >
> > > > Just to clarify, I am not trying to use them both at the same time.
> > >
> > > Not sure if that would work, it might - depends on the notebook keyboard
> > > controller hardware.
> >
> > I tried it, and it seems to get really confused - constant stream of seemingly random error messages.
> >
> > > > X also works with the external PS/2 mouse,
> > >
> > > Good.
> > >
> > > > but not the dedicated trackball.
> > >
> > > What are the exact symptoms?
> >
> > No data at all from it.
> >
> > > Does gpm work?
> >
> > No.
> >
> > > Does cat /dev/psaux work?
> >
> > It doesn't say No such device, it just hangs, giving no data for the trackball, but works fine for the generic mouse.
> >
> > > Does cat /dev/input/mice work?
> >
> > Yes, it does the same as /dev/psaux
> >
> > > What does cat /proc/bus/input/devices say in the
> > > case it doesn't work? ....
> >
> > I: Bus=0011 Vendor=0002 Product=0001 Version=0000
> > N: Name="PS/2 Generic Mouse"
> > P: Phys=isa0060/serio1/input0
> > H: Handlers=mouse0
> > B: EV=7
> > B: KEY=70000 0 0 0 0 0 0 0 0
> > B: REL=3
> >
> > That's for both the generic mouse and the trackball.
>
> Ok. Can you try the usual #define I8042_DEBUG_IO in
> drivers/input/serio/i8042.h?
OK, no problem, but it might take a while. The machine in question has a fubar floppy drive, and the only way to get a new kernel over to it is via a 9600 bps serial link... I'll get to work straight away :-)
John.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:47 EST