[PATCH] 2.5.40 s390 (6/27): config.

From: Martin Schwidefsky (schwidefsky@de.ibm.com)
Date: Fri Oct 04 2002 - 09:38:37 EST


Remove some configuration options that don't really make sense.

diff -urN linux-2.5.40/Documentation/s390/CommonIO linux-2.5.40-s390/Documentation/s390/CommonIO
--- linux-2.5.40/Documentation/s390/CommonIO Tue Oct 1 09:07:40 2002
+++ linux-2.5.40-s390/Documentation/s390/CommonIO Fri Oct 4 16:15:05 2002
@@ -123,9 +123,6 @@
 
 * /proc/chpids
 
- This entry will only show up if you specified CONFIG_CHSC=y during kernel
- config.
-
   This entry serves a dual purpose:
  
   - show which chpids are currently known to Linux and their status (online,
diff -urN linux-2.5.40/arch/s390/Config.help linux-2.5.40-s390/arch/s390/Config.help
--- linux-2.5.40/arch/s390/Config.help Tue Oct 1 09:07:31 2002
+++ linux-2.5.40-s390/arch/s390/Config.help Fri Oct 4 16:15:05 2002
@@ -160,25 +160,11 @@
   Select "vm_reader" if you are running under VM/ESA and want
   to IPL the image from the emulated card reader.
 
-CONFIG_FAST_IRQ
- Select this option in order to get the interrupts processed faster
- on your S/390 or zSeries machine. If selected, after an interrupt
- is processed, the channel subsystem will be asked for other pending
- interrupts which will also be processed before leaving the interrupt
- context. This speeds up the I/O a lot. Say "Y".
-
 CONFIG_MACHCHK_WARNING
   Select this option if you want the machine check handler on IBM S/390 or
   zSeries to process warning machine checks (e.g. on power failures).
   If unsure, say "Y".
 
-CONFIG_CHSC
- Select this option if you want the s390 common I/O layer to use information
- obtained by channel subsystem calls. This will enable Linux to process link
- failures and resource accessibility events. Moreover, if you have procfs
- enabled, you'll be able to toggle chpids logically offline and online. Even
- if you don't understand what this means, you should say "Y".
-
 CONFIG_PROCESS_DEBUG
   Say Y to print all process fault locations to the console. This is
   a debugging option; you probably do not want to set it unless you
diff -urN linux-2.5.40/arch/s390/config.in linux-2.5.40-s390/arch/s390/config.in
--- linux-2.5.40/arch/s390/config.in Tue Oct 1 09:07:35 2002
+++ linux-2.5.40-s390/arch/s390/config.in Fri Oct 4 16:15:05 2002
@@ -17,22 +17,19 @@
 source init/Config.in
 
 mainmenu_option next_comment
+comment 'Base setup'
 comment 'Processor type and features'
 bool 'Symmetric multi-processing support' CONFIG_SMP
 bool 'IEEE FPU emulation' CONFIG_MATHEMU
-endmenu
 
-mainmenu_option next_comment
-comment 'Base setup'
-bool 'Fast IRQ handling' CONFIG_FAST_IRQ
+comment 'I/O subsystem configuration'
 bool 'Process warning machine checks' CONFIG_MACHCHK_WARNING
-bool 'Use chscs for Common I/O' CONFIG_CHSC
-
 tristate 'QDIO support' CONFIG_QDIO
- if [ "$CONFIG_QDIO" != "n" ]; then
- bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
- fi
+if [ "$CONFIG_QDIO" != "n" ]; then
+ bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
+fi
 
+comment 'Misc'
 bool 'Builtin IPL record support' CONFIG_IPL
 if [ "$CONFIG_IPL" = "y" ]; then
   choice 'IPL method generated into head.S' \
@@ -68,7 +65,6 @@
 mainmenu_option next_comment
 comment 'Kernel hacking'
 
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
 #if [ "$CONFIG_CTC" = "y" ]; then
 # bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
 #fi
diff -urN linux-2.5.40/arch/s390/defconfig linux-2.5.40-s390/arch/s390/defconfig
--- linux-2.5.40/arch/s390/defconfig Tue Oct 1 09:07:35 2002
+++ linux-2.5.40-s390/arch/s390/defconfig Fri Oct 4 16:15:05 2002
@@ -31,19 +31,25 @@
 CONFIG_KMOD=y
 
 #
+# Base setup
+#
+
+#
 # Processor type and features
 #
 CONFIG_SMP=y
 CONFIG_MATHEMU=y
 
 #
-# Base setup
+# I/O subsystem configuration
 #
-CONFIG_FAST_IRQ=y
 CONFIG_MACHCHK_WARNING=y
-CONFIG_CHSC=y
 CONFIG_QDIO=m
 # CONFIG_QDIO_PERF_STATS is not set
+
+#
+# Misc
+#
 CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
@@ -84,9 +90,6 @@
 #
 # CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_DPT_I2O is not set
@@ -114,7 +117,6 @@
 # CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
@@ -153,7 +155,7 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID5=m
 # CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_LVM=m
+# CONFIG_BLK_DEV_LVM is not set
 
 #
 # Character device drivers
@@ -226,25 +228,22 @@
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 CONFIG_IPV6=m
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
 
 #
-#
+# SCTP Configuration (EXPERIMENTAL)
 #
+CONFIG_IPV6_SCTP__=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_LLC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -299,7 +298,7 @@
 # CONFIG_HPFS_FS is not set
 CONFIG_PROC_FS=y
 CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_MOUNT is not set
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -311,6 +310,9 @@
 # CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
 
 #
 # Network File Systems
@@ -363,6 +365,11 @@
 CONFIG_MAGIC_SYSRQ=y
 
 #
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
 # Library routines
 #
 # CONFIG_CRC32 is not set
diff -urN linux-2.5.40/arch/s390x/Config.help linux-2.5.40-s390/arch/s390x/Config.help
--- linux-2.5.40/arch/s390x/Config.help Tue Oct 1 09:06:17 2002
+++ linux-2.5.40-s390/arch/s390x/Config.help Fri Oct 4 16:15:05 2002
@@ -159,25 +159,11 @@
   Select "vm_reader" if you are running under VM/ESA and want
   to IPL the image from the emulated card reader.
 
-CONFIG_FAST_IRQ
- Select this option in order to get the interrupts processed faster
- on your S/390 or zSeries machine. If selected, after an interrupt
- is processed, the channel subsystem will be asked for other pending
- interrupts which will also be processed before leaving the interrupt
- context. This speeds up the I/O a lot. Say "Y".
-
 CONFIG_MACHCHK_WARNING
   Select this option if you want the machine check handler on IBM S/390 or
   zSeries to process warning machine checks (e.g. on power failures).
   If unsure, say "Y".
 
-CONFIG_CHSC
- Select this option if you want the s390 common I/O layer to use information
- obtained by channel subsystem calls. This will enable Linux to process link
- failures and resource accessibility events. Moreover, if you have procfs
- enabled, you'll be able to toggle chpids logically offline and online. Even
- if you don't understand what this means, you should say "Y".
-
 CONFIG_S390_SUPPORT
   Select this option if you want to enable your system kernel to
   handle system-calls from ELF binaries for 31 bit ESA. This option
diff -urN linux-2.5.40/arch/s390x/Makefile linux-2.5.40-s390/arch/s390x/Makefile
--- linux-2.5.40/arch/s390x/Makefile Tue Oct 1 09:07:01 2002
+++ linux-2.5.40-s390/arch/s390x/Makefile Fri Oct 4 16:15:05 2002
@@ -26,7 +26,7 @@
 
 core-y += arch/s390x/mm/ arch/s390x/kernel/
 drivers-y += drivers/s390/
-libs-y += arch/s390/lib/
+libs-y += arch/s390x/lib/
 
 all: image listing
 
diff -urN linux-2.5.40/arch/s390x/config.in linux-2.5.40-s390/arch/s390x/config.in
--- linux-2.5.40/arch/s390x/config.in Tue Oct 1 09:06:17 2002
+++ linux-2.5.40-s390/arch/s390x/config.in Fri Oct 4 16:15:05 2002
@@ -17,31 +17,29 @@
 source init/Config.in
 
 mainmenu_option next_comment
+comment 'Base setup'
 comment 'Processor type and features'
 bool 'Symmetric multi-processing support' CONFIG_SMP
 bool 'Kernel support for 31 bit emulation' CONFIG_S390_SUPPORT
 if [ "$CONFIG_S390_SUPPORT" = "y" ]; then
   tristate 'Kernel support for 31 bit ELF binaries' CONFIG_BINFMT_ELF32
 fi
-endmenu
 
-mainmenu_option next_comment
-comment 'Base setup'
-bool 'Fast IRQ handling' CONFIG_FAST_IRQ
+comment 'I/O subsystem configuration'
 bool 'Process warning machine checks' CONFIG_MACHCHK_WARNING
-bool 'Use chscs for Common I/O' CONFIG_CHSC
-
 tristate 'QDIO support' CONFIG_QDIO
- if [ "$CONFIG_QDIO" != "n" ]; then
- bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
- fi
+if [ "$CONFIG_QDIO" != "n" ]; then
+ bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
+fi
 
+comment 'Misc'
 bool 'Builtin IPL record support' CONFIG_IPL
 if [ "$CONFIG_IPL" = "y" ]; then
   choice 'IPL method generated into head.S' \
           "tape CONFIG_IPL_TAPE \
            vm_reader CONFIG_IPL_VM" tape
 fi
+
 define_bool CONFIG_KCORE_ELF y
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
@@ -71,7 +69,6 @@
 mainmenu_option next_comment
 comment 'Kernel hacking'
 
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
 #if [ "$CONFIG_CTC" = "y" ]; then
 # bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
 #fi
diff -urN linux-2.5.40/arch/s390x/defconfig linux-2.5.40-s390/arch/s390x/defconfig
--- linux-2.5.40/arch/s390x/defconfig Tue Oct 1 09:05:46 2002
+++ linux-2.5.40-s390/arch/s390x/defconfig Fri Oct 4 16:15:05 2002
@@ -31,6 +31,10 @@
 CONFIG_KMOD=y
 
 #
+# Base setup
+#
+
+#
 # Processor type and features
 #
 CONFIG_SMP=y
@@ -38,13 +42,15 @@
 CONFIG_BINFMT_ELF32=y
 
 #
-# Base setup
+# I/O subsystem configuration
 #
-CONFIG_FAST_IRQ=y
 CONFIG_MACHCHK_WARNING=y
-CONFIG_CHSC=y
-CONFIG_QDIO=m
+CONFIG_QDIO=y
 # CONFIG_QDIO_PERF_STATS is not set
+
+#
+# Misc
+#
 CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
@@ -85,9 +91,6 @@
 #
 # CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_DPT_I2O is not set
@@ -115,7 +118,6 @@
 # CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
@@ -153,7 +155,7 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID5=m
 # CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_LVM=m
+# CONFIG_BLK_DEV_LVM is not set
 
 #
 # Character device drivers
@@ -225,26 +227,23 @@
 # CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
-CONFIG_IPV6=m
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
+# CONFIG_IPV6 is not set
 
 #
-#
+# SCTP Configuration (EXPERIMENTAL)
 #
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_LLC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -299,7 +298,7 @@
 # CONFIG_HPFS_FS is not set
 CONFIG_PROC_FS=y
 CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_MOUNT is not set
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -311,6 +310,9 @@
 # CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
 
 #
 # Network File Systems
@@ -320,12 +322,12 @@
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_SUNRPC=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_EXPORTFS=y
 # CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_NCPFS_PACKET_SIGNING is not set
@@ -363,6 +365,11 @@
 CONFIG_MAGIC_SYSRQ=y
 
 #
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
 # Library routines
 #
 # CONFIG_CRC32 is not set
diff -urN linux-2.5.40/drivers/s390/Makefile linux-2.5.40-s390/drivers/s390/Makefile
--- linux-2.5.40/drivers/s390/Makefile Tue Oct 1 09:07:00 2002
+++ linux-2.5.40-s390/drivers/s390/Makefile Fri Oct 4 16:15:05 2002
@@ -9,4 +9,6 @@
 obj-y += s390mach.o s390dyn.o sysinfo.o
 obj-y += block/ char/ misc/ net/ cio/
 
+drivers-y += drivers/s390/built-in.o
+
 include $(TOPDIR)/Rules.make
diff -urN linux-2.5.40/drivers/s390/cio/Makefile linux-2.5.40-s390/drivers/s390/cio/Makefile
--- linux-2.5.40/drivers/s390/cio/Makefile Tue Oct 1 09:05:46 2002
+++ linux-2.5.40-s390/drivers/s390/cio/Makefile Fri Oct 4 16:15:05 2002
@@ -3,9 +3,8 @@
 #
 
 obj-y := cio_debug.o # make sure this always comes first
-obj-y += airq.o blacklist.o cio.o ioinfo.o misc.o requestirq.o s390io.o
+obj-y += airq.o blacklist.o cio.o ioinfo.o misc.o requestirq.o s390io.o chsc.o
 
-obj-$(CONFIG_CHSC) += chsc.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
 export-objs += airq.o cio.o ioinfo.o requestirq.o s390io.o
diff -urN linux-2.5.40/drivers/s390/cio/cio.c linux-2.5.40-s390/drivers/s390/cio/cio.c
--- linux-2.5.40/drivers/s390/cio/cio.c Fri Oct 4 16:14:52 2002
+++ linux-2.5.40-s390/drivers/s390/cio/cio.c Fri Oct 4 16:15:05 2002
@@ -969,10 +969,7 @@
                 return;
         }
         /* endif */
-#ifdef CONFIG_FAST_IRQ
         do {
-#endif /* CONFIG_FAST_IRQ */
-
                 /*
                  * Non I/O-subchannel thin interrupts are processed differently
                  */
@@ -1008,16 +1005,14 @@
                         irq_exit ();
                 }
 
-#ifdef CONFIG_FAST_IRQ
-
                 /*
                  * Are more interrupts pending?
                  * If so, the tpi instruction will update the lowcore
                  * to hold the info for the next interrupt.
+ * We don't do this for VM because a tpi drops the cpu
+ * out of the sie which costs more cycles than it saves.
                  */
- } while (tpi (NULL) != 0);
-
-#endif /* CONFIG_FAST_IRQ */
+ } while (!MACHINE_IS_VM && tpi (NULL) != 0);
 
         return;
 }
diff -urN linux-2.5.40/drivers/s390/cio/misc.c linux-2.5.40-s390/drivers/s390/cio/misc.c
--- linux-2.5.40/drivers/s390/cio/misc.c Tue Oct 1 09:06:57 2002
+++ linux-2.5.40-s390/drivers/s390/cio/misc.c Fri Oct 4 16:15:05 2002
@@ -1,7 +1,7 @@
 /*
  * drivers/s390/s390io.c
  * S/390 common I/O routines
- * $Revision: 1.4 $
+ * $Revision: 1.5 $
  *
  * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
  * IBM Corporation
@@ -212,9 +212,7 @@
 
                         CRW_DEBUG(KERN_NOTICE, 2,
                                   "source is channel subsystem\n");
-#ifdef CONFIG_CHSC
                         s390_process_css();
-#endif
                         break;
 
                 default:
diff -urN linux-2.5.40/drivers/s390/cio/s390io.c linux-2.5.40-s390/drivers/s390/cio/s390io.c
--- linux-2.5.40/drivers/s390/cio/s390io.c Fri Oct 4 16:14:52 2002
+++ linux-2.5.40-s390/drivers/s390/cio/s390io.c Fri Oct 4 16:15:05 2002
@@ -995,10 +995,8 @@
         int ccode2; /* condition code for other I/O routines */
         schib_t *p_schib;
         int ret;
-#ifdef CONFIG_CHSC
         int chp = 0;
         int mask;
-#endif /* CONFIG_CHSC */
 
         char dbf_txt[15];
 
@@ -1121,7 +1119,6 @@
         ioinfo[irq]->opm = ioinfo[irq]->schib.pmcw.pim
             & ioinfo[irq]->schib.pmcw.pam & ioinfo[irq]->schib.pmcw.pom;
 
-#ifdef CONFIG_CHSC
         if (ioinfo[irq]->opm) {
                 for (chp=0;chp<=7;chp++) {
                         mask = 0x80 >> chp;
@@ -1133,7 +1130,6 @@
                         }
                 }
         }
-#endif /* CONFIG_CHSC */
 
         CIO_DEBUG_IFMSG(KERN_INFO, 0,
                         "Detected device %04X "
@@ -1700,11 +1696,9 @@
         int ccode;
         __u8 pathmask;
         __u8 domask;
-#ifdef CONFIG_CHSC
         int chp;
         int mask;
         int old_opm = 0;
-#endif /* CONFIG_CHSC */
 
         int ret = 0;
         int i;
@@ -1720,9 +1714,7 @@
         if (ioinfo[irq]->st)
                 return -ENODEV;
 
-#ifdef CONFIG_CHSC
         old_opm = ioinfo[irq]->opm;
-#endif /* CONFIG_CHSC */
         ccode = stsch (irq, &(ioinfo[irq]->schib));
 
         if (ccode) {
@@ -1735,7 +1727,6 @@
                 ioinfo[irq]->ui.flags.pgid_supp = 0;
                 ret = 0;
 
-#ifdef CONFIG_CHSC
                 /*
                  * disable if chpid is logically offline
                  */
@@ -1781,14 +1772,12 @@
                 } else {
                         ret = 0;
                 }
-#endif /* CONFIG_CHSC */
                 return ret;
         }
 
         ioinfo[irq]->opm = ioinfo[irq]->schib.pmcw.pim
             & ioinfo[irq]->schib.pmcw.pam & ioinfo[irq]->schib.pmcw.pom;
 
-#ifdef CONFIG_CHSC
         if (ioinfo[irq]->opm) {
                 for (chp=0;chp<=7;chp++) {
                         mask = 0x80 >> chp;
@@ -1830,7 +1819,6 @@
                                 pdevreg->oper_func( irq, pdevreg);
 
         }
-#endif /* CONFIG_CHSC */
 
         if ( ioinfo[irq]->ui.flags.pgid_supp == 0 )
                 return( 0); /* just exit ... */

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:45 EST