Hi,
I'd appreciate to get comments on the appended patch. It's mostly cleanups
and the like, but the interesting part is the last cset, which is actually
fairly small:
14 files changed, 64 insertions(+), 47 deletions(-)
The build process remains recursive, but it changes the recursion
from
make -C subdir
to
make -f subdir/Makefile
i.e. the current working directory remains the top dir for all times. So
gcc/ld/.. are now called from the topdir, allowing to closer resemble
a non-recursive build. Some Makefiles may need a little additional
tweaking (in particular arch/*), but generally, the changes required are
pretty small.
I'd appreciate comments and/or testing, if I hear no complaints, it'll go
to Linus soon ;)
--Kai
Pull from http://linux-isdn.bkbits.net/linux-2.5.make
(Merging changesets omitted for clarity)
-----------------------------------------------------------------------------
ChangeSet@1.675, 2002-10-02 14:23:38-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Small cleanups
o Use a function "descend" for descending into subdirectories
o Remove unused (?) "boot" target
o Remove unnecessary intermediate "sub_dirs" target from Rules.make
o Use /bin/true instead of echo -n to suppress spurious
"nothing to be done for ..." output from make
----------------------------------------------------------------------------
Makefile | 53 +++++++++++++++++++++++++----------------------------
Rules.make | 27 +++++++++++++++------------
2 files changed, 40 insertions(+), 40 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.676, 2002-10-02 14:42:00-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Remove xfs vpath hack
xfs.o is built as one modules out of objects distributed into
multiple subdirs. That is okay with the current kbuild, you just
have to include the path for objects which reside in a subdir, then.
xfs used vpath instead of explicitly adding the paths, which is
inconsistent and conflicts e.g. with proper module version generation.
----------------------------------------------------------------------------
Rules.make | 3 +--
fs/xfs/Makefile | 27 +++++++++++++--------------
2 files changed, 14 insertions(+), 16 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.677, 2002-10-02 14:46:16-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Standardize ACPI Makefiles
ACPI was a bit lazy and just said compile all .c files in this directory,
which is different from all other Makefiles and will not work very
well e.g. bk, where a .c file may not be checked out yet, or separate
obj/src dirs. So just explicitly list the files we want to compile.
----------------------------------------------------------------------------
dispatcher/Makefile | 3 ++-
events/Makefile | 3 ++-
executer/Makefile | 5 ++++-
hardware/Makefile | 2 +-
namespace/Makefile | 4 +++-
parser/Makefile | 3 ++-
resources/Makefile | 3 ++-
tables/Makefile | 3 ++-
utilities/Makefile | 3 ++-
9 files changed, 20 insertions(+), 9 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.678, 2002-10-02 14:54:37-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Small quirks for separate obj / src trees
Add a couple of missing $(obj) and the like.
Also, remove the __chmod hack which made some files in the source tree
executable - hopefully, everybody's copy is by now ;)
----------------------------------------------------------------------------
drivers/isdn/hisax/Makefile | 2 +-
drivers/pci/Makefile | 2 +-
drivers/zorro/Makefile | 2 +-
scripts/Makefile | 11 +++--------
scripts/lxdialog/Makefile | 6 +++++-
5 files changed, 11 insertions(+), 12 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.679, 2002-10-02 14:59:28-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Add some bug traps
Makefiles which still use obsolete 2.4 constructs now give a warning.
----------------------------------------------------------------------------
Rules.make | 29 +++++++++++++++++++----------
1 files changed, 19 insertions(+), 10 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.680, 2002-10-02 16:29:37-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Handle $(core-y) the same way as $(init-y), $(drivers-y) etc
$(CORE_FILES) did not quite follow the way the other vmlinux parts where
handled, due to potential init order dependencies. However, it seems
everybody is putting arch specific stuff in front, so we keep doing
this and nothing should break ;)
----------------------------------------------------------------------------
Makefile | 8 +++-----
1 files changed, 3 insertions(+), 5 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.681, 2002-10-02 16:57:45-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Use $(core-y) and friends directly
The capitalized aliases $(CORE_FILES) etc are basically superfluous now,
move the remaining users to $(core-y) and the like.
----------------------------------------------------------------------------
Makefile | 42 +++++++++++++++++++-----------------------
arch/alpha/Makefile | 2 ++
arch/alpha/boot/Makefile | 2 +-
arch/sparc/Makefile | 3 +--
arch/sparc/boot/Makefile | 5 ++---
drivers/isdn/i4l/isdn_ppp.h | 2 +-
6 files changed, 26 insertions(+), 30 deletions(-)
-----------------------------------------------------------------------------
ChangeSet@1.682, 2002-10-02 17:52:22-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Always build helpers in script/
As noticed by Sam Ravnborg, we need the targets in scripts (fixdep,
in particular) considered always, i.e. also when compiling modules.
----------------------------------------------------------------------------
Makefile | 5 +++++
1 files changed, 5 insertions(+)
-----------------------------------------------------------------------------
ChangeSet@1.683, 2002-10-02 21:51:28-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Don't cd into subdirs during build
Instead of using make -C <subdir>, just use make -f <subdir>/Makefile.
This means we now call gcc/ld/... always from the topdir.
Advantages are:
o We don't need to use -I$(TOPDIR)/include and the like, just
-Iinclude works.
o __FILE__ gives the correct relative path from the topdir instead
of an absolute path, as it did before for included headers
o gcc errors/warnings give the correct relative path from the topdir
o takes us a step closer to a non-recursive build (though that's probably
as close as it gets)
The changes to Rules.make were done in a way which only uses the new way
for the standard recursive build (which remains recursive, just without
cd), all the archs do make -C arch/$(ARCH)/boot ..., which should keep
working as before. However, of course this should be converted eventually,
it's possible to do so piecemeal arch by arch.
It seems to work fine for most of the standard kernel. Potential places
which need changing are added -I flags to the command line, which now
need to have the path relative to the topdir and explicit rules for
generating files, which need to properly use $(obj) / $(src) to work
correctly.
----------------------------------------------------------------------------
Rules.make | 79 +++++++++++++++++++++++---------------
arch/i386/Makefile | 4 -
arch/i386/boot/Makefile | 2
drivers/acpi/Makefile | 2
drivers/ide/arm/Makefile | 2
drivers/ide/legacy/Makefile | 2
drivers/ide/pci/Makefile | 2
drivers/ide/ppc/Makefile | 2
drivers/message/fusion/Makefile | 2
drivers/net/sk98lin/Makefile | 2
drivers/net/skfp/Makefile | 2
drivers/scsi/sym53c8xx_2/Makefile | 2
drivers/usb/storage/Makefile | 2
fs/xfs/Makefile | 6 +-
14 files changed, 64 insertions(+), 47 deletions(-)
=============================================================================
unified diffs follow for reference
=============================================================================
-----------------------------------------------------------------------------
ChangeSet@1.675, 2002-10-02 14:23:38-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Small cleanups
o Use a function "descend" for descending into subdirectories
o Remove unused (?) "boot" target
o Remove unnecessary intermediate "sub_dirs" target from Rules.make
o Use /bin/true instead of echo -n to suppress spurious
"nothing to be done for ..." output from make
---------------------------------------------------------------------------
diff -Nru a/Makefile b/Makefile
--- a/Makefile Wed Oct 2 21:51:56 2002
+++ b/Makefile Wed Oct 2 21:51:56 2002
@@ -52,13 +52,6 @@
all: vmlinux
-# Print entire command lines instead of short version
-# For now, leave the default
-
-ifndef KBUILD_VERBOSE
- KBUILD_VERBOSE = 1
-endif
-
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
@@ -105,6 +98,12 @@
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
+# For now, leave verbose as default
+
+ifndef KBUILD_VERBOSE
+ KBUILD_VERBOSE = 1
+endif
+
# If the user wants quiet mode, echo short versions of the commands
# only and suppress the 'Entering/Leaving directory' messages
@@ -120,7 +119,7 @@
quiet=silent_
endif
-export quiet
+export quiet KBUILD_VERBOSE
#
# Include the make variables (CC, etc...)
@@ -183,7 +182,7 @@
.PHONY: scripts
scripts:
- @$(MAKE) -C scripts
+ @$(call descend,scripts,)
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
@@ -276,12 +275,6 @@
export NETWORKS DRIVERS LIBS HEAD LDFLAGS MAKEBOOT
-# boot target
-# ---------------------------------------------------------------------------
-
-boot: vmlinux
- @$(MAKE) -C arch/$(ARCH)/boot
-
# Build vmlinux
# ---------------------------------------------------------------------------
@@ -314,7 +307,7 @@
echo ' Generating build number'
. scripts/mkversion > .tmp_version
mv -f .tmp_version .version
- +$(MAKE) -C init
+ +$(call descend,init,)
$(call cmd,link_vmlinux)
echo 'cmd_$@ := $(cmd_link_vmlinux)' > $(@D)/.$(@F).cmd
$(NM) $@ | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > System.map
@@ -363,7 +356,7 @@
.PHONY: $(SUBDIRS)
$(SUBDIRS): .hdepend prepare
- @$(MAKE) -C $@
+ @$(call descend,$@,)
# Things we need done before we descend to build or make
# module versions are listed in "prepare"
@@ -386,17 +379,17 @@
# ---------------------------------------------------------------------------
%.s: %.c FORCE
- @$(MAKE) -C $(@D) $(@F)
+ @$(call descend,$(@D),$(@F))
%.i: %.c FORCE
- @$(MAKE) -C $(@D) $(@F)
+ @$(call descend,$(@D),$(@F))
%.o: %.c FORCE
- @$(MAKE) -C $(@D) $(@F)
+ @$(call descend,$(@D),$(@F))
%.lst: %.c FORCE
- @$(MAKE) -C $(@D) $(@F)
+ @$(call descend,$(@D),$(@F))
%.s: %.S FORCE
- @$(MAKE) -C $(@D) $(@F)
+ @$(call descend,$(@D),$(@F))
%.o: %.S FORCE
- @$(MAKE) -C $(@D) $(@F)
+ @$(call descend,$(@D),$(@F))
# FIXME: The asm symlink changes when $(ARCH) changes. That's
# hard to detect, but I suppose "make mrproper" is a good idea
@@ -481,7 +474,7 @@
$(update-if-changed)
$(patsubst %,_sfdep_%,$(SUBDIRS)): FORCE
- @$(MAKE) -C $(patsubst _sfdep_%, %, $@) fastdep
+ @$(call descend,$(patsubst _sfdep_%,%,$@),fastdep)
else # !CONFIG_MODVERSIONS
@@ -533,7 +526,7 @@
.PHONY: $(patsubst %, _modinst_%, $(SUBDIRS))
$(patsubst %, _modinst_%, $(SUBDIRS)) :
- @$(MAKE) -C $(patsubst _modinst_%, %, $@) modules_install
+ $(descend,$(patsubst _modinst_%,%,$@),modules_install)
else # CONFIG_MODULES
@@ -631,11 +624,11 @@
make_with_config
xconfig:
- @$(MAKE) -C scripts kconfig.tk
+ @$(call descend,scripts,kconfig.tk)
wish -f scripts/kconfig.tk
menuconfig:
- @$(MAKE) -C scripts lxdialog
+ @$(call descend,scripts,lxdialog)
$(CONFIG_SHELL) $(src)/scripts/Menuconfig arch/$(ARCH)/config.in
config:
@@ -734,7 +727,7 @@
-type f -print | xargs rm -f
@rm -rf $(MRPROPER_DIRS)
@rm -f $(MRPROPER_FILES)
- @$(MAKE) -C scripts mrproper
+ @$(call descend,scripts,mrproper)
@$(MAKE) -f Documentation/DocBook/Makefile mrproper
distclean: mrproper
@@ -909,5 +902,9 @@
fi
endef
+# $(call descend,<dir>,<target>)
+# Recursively call a sub-make in <dir> with target <target>
+
+descend = $(MAKE) -C $(1) $(2)
FORCE:
diff -Nru a/Rules.make b/Rules.make
--- a/Rules.make Wed Oct 2 21:51:56 2002
+++ b/Rules.make Wed Oct 2 21:51:56 2002
@@ -136,8 +136,8 @@
# If we don't export any symbols in this dir, just descend
# ---------------------------------------------------------------------------
-fastdep: sub_dirs
- @echo -n
+fastdep: $(subdir-ym)
+ @/bin/true
else
@@ -206,7 +206,7 @@
targets := $(addprefix $(MODVERDIR)/,$(export-objs:.o=.ver))
-fastdep: $(targets) sub_dirs
+fastdep: $(targets) $(subdir-ym)
@mkdir -p $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR)
@touch $(addprefix $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR)/,$(export-objs:.o=.ver))
@@ -221,13 +221,13 @@
.PHONY: modules_install
-modules_install: sub_dirs
+modules_install: $(subdir-ym)
ifneq ($(obj-m),)
@echo Installing modules in $(MODLIB)/kernel/$(RELDIR)
@mkdir -p $(MODLIB)/kernel/$(RELDIR)
@cp $(obj-m) $(MODLIB)/kernel/$(RELDIR)
else
- @echo -n
+ @/bin/true
endif
else # ! modules_install
@@ -248,8 +248,8 @@
# The echo suppresses the "Nothing to be done for first_rule"
first_rule: $(if $(KBUILD_BUILTIN),$(O_TARGET) $(L_TARGET) $(EXTRA_TARGETS)) \
$(if $(KBUILD_MODULES),$(obj-m)) \
- sub_dirs
- @echo -n
+ $(subdir-ym)
+ @/bin/true
# Compile C sources (.c)
# ---------------------------------------------------------------------------
@@ -324,7 +324,7 @@
# ---------------------------------------------------------------------------
# To build objects in subdirs, we need to descend into the directories
-$(sort $(subdir-obj-y)): sub_dirs ;
+$(sort $(subdir-obj-y)): $(subdir-ym) ;
#
# Rule to compile a set of .o files into one .o file
@@ -454,12 +454,10 @@
# Descending
# ---------------------------------------------------------------------------
-.PHONY: sub_dirs $(subdir-ym)
-
-sub_dirs: $(subdir-ym)
+.PHONY: $(subdir-ym)
$(subdir-ym):
- @$(MAKE) -C $@ $(MAKECMDGOALS)
+ @$(call descend,$@,$(MAKECMDGOALS))
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
@@ -573,4 +571,9 @@
echo "$(2)" &&)) \
$(2)
endef
+
+# $(call descend,<dir>,<target>)
+# Recursively call a sub-make in <dir> with target <target>
+
+descend = $(MAKE) -C $(1) $(2)
-----------------------------------------------------------------------------
ChangeSet@1.676, 2002-10-02 14:42:00-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Remove xfs vpath hack
xfs.o is built as one modules out of objects distributed into
multiple subdirs. That is okay with the current kbuild, you just
have to include the path for objects which reside in a subdir, then.
xfs used vpath instead of explicitly adding the paths, which is
inconsistent and conflicts e.g. with proper module version generation.
---------------------------------------------------------------------------
diff -Nru a/Rules.make b/Rules.make
--- a/Rules.make Wed Oct 2 21:51:58 2002
+++ b/Rules.make Wed Oct 2 21:51:58 2002
@@ -207,7 +207,7 @@
targets := $(addprefix $(MODVERDIR)/,$(export-objs:.o=.ver))
fastdep: $(targets) $(subdir-ym)
- @mkdir -p $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR)
+ @mkdir -p $(dir $(addprefix $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR),$(export-objs:.o=.ver)))
@touch $(addprefix $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR)/,$(export-objs:.o=.ver))
endif # export-objs
@@ -245,7 +245,6 @@
endif
endif
-# The echo suppresses the "Nothing to be done for first_rule"
first_rule: $(if $(KBUILD_BUILTIN),$(O_TARGET) $(L_TARGET) $(EXTRA_TARGETS)) \
$(if $(KBUILD_MODULES),$(obj-m)) \
$(subdir-ym)
diff -Nru a/fs/xfs/Makefile b/fs/xfs/Makefile
--- a/fs/xfs/Makefile Wed Oct 2 21:51:58 2002
+++ b/fs/xfs/Makefile Wed Oct 2 21:51:58 2002
@@ -32,11 +32,6 @@
# Makefile for XFS on Linux.
#
-
-# we also have source in the subdirectories..
-vpath %.c = . linux pagebuf support
-
-
# This needs -I. because everything does #include <xfs.h> instead of "xfs.h".
# The code is wrong, local files should be included using "xfs.h", not <xfs.h>
# but I am not going to change every file at the moment.
@@ -49,7 +44,8 @@
EXTRA_CFLAGS += -DPAGEBUF_TRACE
endif
-export-objs := page_buf.o ktrace.o xfs_globals.o
+export-objs := pagebuf/page_buf.o support/ktrace.o \
+ linux/xfs_globals.o
obj-$(CONFIG_XFS_FS) += xfs.o
@@ -65,8 +61,8 @@
xfs-obj-$(CONFIG_FS_POSIX_ACL) += xfs_acl.o
xfs-obj-$(CONFIG_FS_POSIX_CAP) += xfs_cap.o
xfs-obj-$(CONFIG_FS_POSIX_MAC) += xfs_mac.o
-xfs-obj-$(CONFIG_PROC_FS) += xfs_stats.o
-xfs-obj-$(CONFIG_SYSCTL) += xfs_sysctl.o
+xfs-obj-$(CONFIG_PROC_FS) += linux/xfs_stats.o
+xfs-obj-$(CONFIG_SYSCTL) += linux/xfs_sysctl.o
xfs-objs += $(xfs-obj-y) \
@@ -118,11 +114,13 @@
xfs_rw.o
# Objects in pagebuf/
-xfs-objs += page_buf.o \
- page_buf_locking.o
+xfs-objs += $(addprefix pagebuf/, \
+ page_buf.o \
+ page_buf_locking.o)
# Objects in linux/
-xfs-objs += xfs_aops.o \
+xfs-objs += $(addprefix linux/, \
+ xfs_aops.o \
xfs_behavior.o \
xfs_file.o \
xfs_fs_subr.o \
@@ -131,16 +129,17 @@
xfs_iops.o \
xfs_lrw.o \
xfs_super.o \
- xfs_vnode.o
+ xfs_vnode.o)
# Objects in support/
-xfs-objs += debug.o \
+xfs-objs += $(addprefix support/, \
+ debug.o \
kmem.o \
ktrace.o \
move.o \
mrlock.o \
qsort.o \
- uuid.o
+ uuid.o)
# If both xfs and kdb modules are built in then xfsidbg is built in. If xfs is
# a module and kdb modules are being compiled then xfsidbg must be a module, to
-----------------------------------------------------------------------------
ChangeSet@1.677, 2002-10-02 14:46:16-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Standardize ACPI Makefiles
ACPI was a bit lazy and just said compile all .c files in this directory,
which is different from all other Makefiles and will not work very
well e.g. bk, where a .c file may not be checked out yet, or separate
obj/src dirs. So just explicitly list the files we want to compile.
---------------------------------------------------------------------------
diff -Nru a/drivers/acpi/dispatcher/Makefile b/drivers/acpi/dispatcher/Makefile
--- a/drivers/acpi/dispatcher/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/dispatcher/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
+ dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/events/Makefile b/drivers/acpi/events/Makefile
--- a/drivers/acpi/events/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/events/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := evevent.o evregion.o evsci.o evxfevnt.o \
+ evmisc.o evrgnini.o evxface.o evxfregn.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/executer/Makefile b/drivers/acpi/executer/Makefile
--- a/drivers/acpi/executer/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/executer/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,10 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
+ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\
+ excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \
+ exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/hardware/Makefile b/drivers/acpi/hardware/Makefile
--- a/drivers/acpi/hardware/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/hardware/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,7 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := hwacpi.o hwgpe.o hwregs.o hwsleep.o hwtimer.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/namespace/Makefile b/drivers/acpi/namespace/Makefile
--- a/drivers/acpi/namespace/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/namespace/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,9 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := nsaccess.o nsdumpdv.o nsload.o nssearch.o nsxfeval.o \
+ nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \
+ nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/parser/Makefile b/drivers/acpi/parser/Makefile
--- a/drivers/acpi/parser/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/parser/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := psargs.o psparse.o pstree.o pswalk.o \
+ psopcode.o psscope.o psutils.o psxface.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/resources/Makefile b/drivers/acpi/resources/Makefile
--- a/drivers/acpi/resources/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/resources/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := rsaddr.o rscreate.o rsio.o rslist.o rsmisc.o rsxface.o \
+ rscalc.o rsdump.o rsirq.o rsmemory.o rsutils.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/tables/Makefile b/drivers/acpi/tables/Makefile
--- a/drivers/acpi/tables/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/tables/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := tbconvrt.o tbget.o tbrsdt.o tbxface.o \
+ tbgetall.o tbinstal.o tbutils.o tbxfroot.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff -Nru a/drivers/acpi/utilities/Makefile b/drivers/acpi/utilities/Makefile
--- a/drivers/acpi/utilities/Makefile Wed Oct 2 21:52:00 2002
+++ b/drivers/acpi/utilities/Makefile Wed Oct 2 21:52:00 2002
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
+obj-y := utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+ utcopy.o utdelete.o utglobal.o utmath.o utobject.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
-----------------------------------------------------------------------------
ChangeSet@1.678, 2002-10-02 14:54:37-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Small quirks for separate obj / src trees
Add a couple of missing $(obj) and the like.
Also, remove the __chmod hack which made some files in the source tree
executable - hopefully, everybody's copy is by now ;)
---------------------------------------------------------------------------
diff -Nru a/drivers/isdn/hisax/Makefile b/drivers/isdn/hisax/Makefile
--- a/drivers/isdn/hisax/Makefile Wed Oct 2 21:52:01 2002
+++ b/drivers/isdn/hisax/Makefile Wed Oct 2 21:52:01 2002
@@ -63,7 +63,7 @@
hisax-objs += $(hisax-objs-y)
-CERT := $(shell md5sum -c md5sums.asc >> /dev/null;echo $$?)
+CERT := $(shell cd $(src); md5sum -c md5sums.asc > /dev/null 2> /dev/null ;echo $$?)
CFLAGS_cert.o := -DCERTIFICATION=$(CERT)
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/pci/Makefile b/drivers/pci/Makefile
--- a/drivers/pci/Makefile Wed Oct 2 21:52:01 2002
+++ b/drivers/pci/Makefile Wed Oct 2 21:52:01 2002
@@ -40,6 +40,6 @@
# And that's how to generate them
$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
- $(obj)/gen-devlist < $<
+ ( cd $(obj); ./gen-devlist ) < $<
$(obj)/classlist.h: $(obj)/devlist.h
diff -Nru a/drivers/zorro/Makefile b/drivers/zorro/Makefile
--- a/drivers/zorro/Makefile Wed Oct 2 21:52:01 2002
+++ b/drivers/zorro/Makefile Wed Oct 2 21:52:01 2002
@@ -18,4 +18,4 @@
# And that's how to generate them
$(obj)/devlist.h: $(src)/zorro.ids $(obj)/gen-devlist
- $(obj)/gen-devlist < $<
+ ( cd $(obj); ./gen-devlist ) < $<
diff -Nru a/scripts/Makefile b/scripts/Makefile
--- a/scripts/Makefile Wed Oct 2 21:52:01 2002
+++ b/scripts/Makefile Wed Oct 2 21:52:01 2002
@@ -9,18 +9,13 @@
# conmakehash: Create arrays for initializing the kernel console tables
# tkparse: Used by xconfig
-all: fixdep split-include docproc conmakehash __chmod
+EXTRA_TARGETS := fixdep split-include docproc conmakehash
# The following temporary rule will make sure that people's
# trees get updated to the right permissions, since patch(1)
# can't do it
# ---------------------------------------------------------------------------
-.PHONY: __chmod
-
-__chmod: kernel-doc mkcompile_h makelst
- @chmod a+x $^
-
host-progs := fixdep split-include conmakehash docproc tkparse
tkparse-objs := tkparse.o tkcond.o tkgen.o
@@ -30,7 +25,7 @@
# but it is not worth the effort to generate the dependencies.
# The alternative solution to always generate it is fairly fast.
# FORCE it to remake
-$(obj)/kconfig.tk: $(srctree)/arch/$(ARCH)/config.in tkparse FORCE
+$(obj)/kconfig.tk: $(srctree)/arch/$(ARCH)/config.in $(obj)/tkparse FORCE
@echo ' Generating $@'
@( \
if [ -f /usr/local/bin/wish ]; then \
@@ -51,7 +46,7 @@
# Targets hardcoded and wellknow in top-level makefile
.PHONY: lxdialog
lxdialog:
- $(MAKE) -C lxdialog all
+ $(call descend,lxdialog,)
# fixdep is needed to compile other host programs
$(obj)/split-include $(obj)/docproc $(addprefix $(obj)/,$(tkparse-objs)) \
diff -Nru a/scripts/lxdialog/Makefile b/scripts/lxdialog/Makefile
--- a/scripts/lxdialog/Makefile Wed Oct 2 21:52:01 2002
+++ b/scripts/lxdialog/Makefile Wed Oct 2 21:52:01 2002
@@ -20,9 +20,13 @@
lxdialog-objs := checklist.o menubox.o textbox.o yesno.o inputbox.o \
util.o lxdialog.o msgbox.o
-all: ncurses lxdialog
+EXTRA_TARGETS := lxdialog
+
+first_rule: ncurses
include $(TOPDIR)/Rules.make
+
+.PHONY: ncurses
ncurses:
@echo "main() {}" > lxtemp.c
-----------------------------------------------------------------------------
ChangeSet@1.679, 2002-10-02 14:59:28-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Add some bug traps
Makefiles which still use obsolete 2.4 constructs now give a warning.
---------------------------------------------------------------------------
diff -Nru a/Rules.make b/Rules.make
--- a/Rules.make Wed Oct 2 21:52:03 2002
+++ b/Rules.make Wed Oct 2 21:52:03 2002
@@ -8,6 +8,23 @@
empty :=
space := $(empty) $(empty)
+# Some bug traps
+# ---------------------------------------------------------------------------
+
+ifdef O_TARGET
+$(warning kbuild: Usage of O_TARGET is obsolete in 2.5. Please fix!
+endif
+
+ifdef L_TARGET
+ifneq ($(L_TARGET),lib.a)
+$(warning kbuild: L_TARGET ($(L_TARGET)) should be renamed to lib.a. Please fix!)
+endif
+endif
+
+ifdef list-multi
+$(warning kbuild: list-multi ($(list-multi)) is obsolete in 2.5. Please fix!)
+endif
+
# Figure out paths
# ---------------------------------------------------------------------------
# Find the path relative to the toplevel dir, $(RELDIR), and express
@@ -84,16 +101,8 @@
__obj-m = $(filter-out export.o,$(obj-m))
# if $(foo-objs) exists, foo.o is a composite object
-__multi-used-y := $(sort $(foreach m,$(__obj-y), $(if $($(m:.o=-objs)), $(m))))
-__multi-used-m := $(sort $(foreach m,$(__obj-m), $(if $($(m:.o=-objs)), $(m))))
-
-# FIXME: Rip this out later
-# Backwards compatibility: if a composite object is listed in
-# $(list-multi), skip it here, since the Makefile will have an explicit
-# link rule for it
-
-multi-used-y := $(filter-out $(list-multi),$(__multi-used-y))
-multi-used-m := $(filter-out $(list-multi),$(__multi-used-m))
+multi-used-y := $(sort $(foreach m,$(__obj-y), $(if $($(m:.o=-objs)), $(m))))
+multi-used-m := $(sort $(foreach m,$(__obj-m), $(if $($(m:.o=-objs)), $(m))))
# Build list of the parts of our composite objects, our composite
# objects depend on those (obviously)
-----------------------------------------------------------------------------
ChangeSet@1.680, 2002-10-02 16:29:37-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Handle $(core-y) the same way as $(init-y), $(drivers-y) etc
$(CORE_FILES) did not quite follow the way the other vmlinux parts where
handled, due to potential init order dependencies. However, it seems
everybody is putting arch specific stuff in front, so we keep doing
this and nothing should break ;)
---------------------------------------------------------------------------
diff -Nru a/Makefile b/Makefile
--- a/Makefile Wed Oct 2 21:52:05 2002
+++ b/Makefile Wed Oct 2 21:52:05 2002
@@ -252,17 +252,15 @@
networks-y := net/
libs-y := lib/
-CORE_FILES := kernel/built-in.o mm/built-in.o fs/built-in.o \
- ipc/built-in.o security/built-in.o
-SUBDIRS += kernel mm fs ipc security
-
include arch/$(ARCH)/Makefile
+core-y += kernel/ mm/ fs/ ipc/ security/
+
SUBDIRS += $(patsubst %/,%,$(filter %/, $(init-y) $(init-m)))
INIT += $(patsubst %/, %/built-in.o, $(init-y))
SUBDIRS += $(patsubst %/,%,$(filter %/, $(core-y) $(core-m)))
-CORE_FILES := $(patsubst %/, %/built-in.o, $(core-y)) $(CORE_FILES)
+CORE_FILES += $(patsubst %/, %/built-in.o, $(core-y))
SUBDIRS += $(patsubst %/,%,$(filter %/, $(drivers-y) $(drivers-m)))
DRIVERS += $(patsubst %/, %/built-in.o, $(drivers-y))
-----------------------------------------------------------------------------
ChangeSet@1.681, 2002-10-02 16:57:45-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Use $(core-y) and friends directly
The capitalized aliases $(CORE_FILES) etc are basically superfluous now,
move the remaining users to $(core-y) and the like.
---------------------------------------------------------------------------
diff -Nru a/Makefile b/Makefile
--- a/Makefile Wed Oct 2 21:52:06 2002
+++ b/Makefile Wed Oct 2 21:52:06 2002
@@ -151,7 +151,7 @@
CONFIG_SHELL TOPDIR HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE MAKEFILES GENKSYMS PERL
-export CPPFLAGS EXPORT_FLAGS NOSTDINC_FLAGS OBJCOPYFLAGS
+export CPPFLAGS EXPORT_FLAGS NOSTDINC_FLAGS OBJCOPYFLAGS LDFLAGS
export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
@@ -249,29 +249,25 @@
init-y := init/
drivers-y := drivers/ sound/
-networks-y := net/
+net-y := net/
libs-y := lib/
+core-y :=
+SUBDIRS :=
include arch/$(ARCH)/Makefile
core-y += kernel/ mm/ fs/ ipc/ security/
-SUBDIRS += $(patsubst %/,%,$(filter %/, $(init-y) $(init-m)))
-INIT += $(patsubst %/, %/built-in.o, $(init-y))
+SUBDIRS += $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+ $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
+ $(net-y) $(net-m) $(libs-y) $(libs-m)))
+init-y := $(patsubst %/, %/built-in.o, $(init-y))
+core-y := $(patsubst %/, %/built-in.o, $(core-y))
+drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
+net-y := $(patsubst %/, %/built-in.o, $(net-y))
+libs-y := $(patsubst %/, %/lib.a, $(libs-y))
-SUBDIRS += $(patsubst %/,%,$(filter %/, $(core-y) $(core-m)))
-CORE_FILES += $(patsubst %/, %/built-in.o, $(core-y))
-
-SUBDIRS += $(patsubst %/,%,$(filter %/, $(drivers-y) $(drivers-m)))
-DRIVERS += $(patsubst %/, %/built-in.o, $(drivers-y))
-
-SUBDIRS += $(patsubst %/,%,$(filter %/, $(networks-y) $(networks-m)))
-NETWORKS += $(patsubst %/, %/built-in.o, $(networks-y))
-
-SUBDIRS += $(patsubst %/,%,$(filter %/, $(libs-y) $(libs-m)))
-LIBS += $(patsubst %/, %/lib.a, $(libs-y))
-
-export NETWORKS DRIVERS LIBS HEAD LDFLAGS MAKEBOOT
+$(warning $(SUBDIRS))
# Build vmlinux
# ---------------------------------------------------------------------------
@@ -283,16 +279,16 @@
# we cannot yet know if we will need to relink vmlinux.
# So we descend into init/ inside the rule for vmlinux again.
-vmlinux-objs := $(HEAD) $(INIT) $(CORE_FILES) $(LIBS) $(DRIVERS) $(NETWORKS)
+vmlinux-objs := $(HEAD) $(init-y) $(core-y) $(libs-y) $(drivers-y) $(net-y)
quiet_cmd_link_vmlinux = LD $@
define cmd_link_vmlinux
- $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) $(HEAD) $(INIT) \
+ $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) $(HEAD) $(init-y) \
--start-group \
- $(CORE_FILES) \
- $(LIBS) \
- $(DRIVERS) \
- $(NETWORKS) \
+ $(core-y) \
+ $(libs-y) \
+ $(drivers-y) \
+ $(net-y) \
--end-group \
$(filter $(kallsyms.o),$^) \
-o $@
diff -Nru a/arch/alpha/Makefile b/arch/alpha/Makefile
--- a/arch/alpha/Makefile Wed Oct 2 21:52:06 2002
+++ b/arch/alpha/Makefile Wed Oct 2 21:52:06 2002
@@ -95,6 +95,8 @@
core-$(CONFIG_MATHEMU) += arch/alpha/math-emu/
libs-y += arch/alpha/lib/
+export libs-y
+
MAKEBOOT = $(MAKE) -C arch/alpha/boot
rawboot:
diff -Nru a/arch/alpha/boot/Makefile b/arch/alpha/boot/Makefile
--- a/arch/alpha/boot/Makefile Wed Oct 2 21:52:06 2002
+++ b/arch/alpha/boot/Makefile Wed Oct 2 21:52:06 2002
@@ -20,7 +20,7 @@
TARGETS = vmlinux.gz tools/objstrip # also needed by aboot & milo
VMLINUX = $(TOPDIR)/vmlinux
OBJSTRIP = tools/objstrip
-LIBS := $(patsubst lib/%,$(TOPDIR)/lib/%,$(LIBS))
+LIBS := $(addprefix $(TOPDIR)/,$(libs-y))
all: $(TARGETS)
@echo Ready to install kernel in $(shell pwd)/vmlinux.gz
diff -Nru a/arch/sparc/Makefile b/arch/sparc/Makefile
--- a/arch/sparc/Makefile Wed Oct 2 21:52:06 2002
+++ b/arch/sparc/Makefile Wed Oct 2 21:52:06 2002
@@ -41,8 +41,7 @@
libs-y += arch/sparc/prom/ arch/sparc/lib/
# Export what is needed by arch/sparc/boot/Makefile
-export CORE_FILES
-export INIT
+export init-y core-y drivers-y net-y libs-y HEAD
image: vmlinux
$(MAKE) -C arch/sparc/boot image
diff -Nru a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
--- a/arch/sparc/boot/Makefile Wed Oct 2 21:52:06 2002
+++ b/arch/sparc/boot/Makefile Wed Oct 2 21:52:06 2002
@@ -22,9 +22,8 @@
clean:
rm -f btfixupprep piggyback tftpboot.img btfix.o btfix.s image
-BTOBJS := $(HEAD) $(INIT)
-BTLIBS := $(CORE_FILES) $(LIBS) \
- $(DRIVERS) $(NETWORKS)
+BTOBJS := $(HEAD) $(init-y)
+BTLIBS := $(core-y) $(LIBS) $(drivers-y) $(net-y)
# Actual linking
image: btfix.o
diff -Nru a/drivers/isdn/i4l/isdn_ppp.h b/drivers/isdn/i4l/isdn_ppp.h
--- a/drivers/isdn/i4l/isdn_ppp.h Wed Oct 2 21:52:06 2002
+++ b/drivers/isdn/i4l/isdn_ppp.h Wed Oct 2 21:52:06 2002
@@ -27,7 +27,7 @@
#else
static inline int
-isdn_ppp_xmit(struct sk_buff *, struct net_device *);
+isdn_ppp_xmit(struct sk_buff *, struct net_device *)
{
return 0;
}
-----------------------------------------------------------------------------
ChangeSet@1.682, 2002-10-02 17:52:22-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Always build helpers in script/
As noticed by Sam Ravnborg, we need the targets in scripts (fixdep,
in particular) considered always, i.e. also when compiling modules.
---------------------------------------------------------------------------
diff -Nru a/scripts/Makefile b/scripts/Makefile
--- a/scripts/Makefile Wed Oct 2 21:52:08 2002
+++ b/scripts/Makefile Wed Oct 2 21:52:08 2002
@@ -11,6 +11,11 @@
EXTRA_TARGETS := fixdep split-include docproc conmakehash
+# Yikes. We need to build this stuff here even if the user only wants
+# modules.
+
+KBUILD_BUILTIN := 1
+
# The following temporary rule will make sure that people's
# trees get updated to the right permissions, since patch(1)
# can't do it
-----------------------------------------------------------------------------
ChangeSet@1.683, 2002-10-02 21:51:28-05:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Don't cd into subdirs during build
Instead of using make -C <subdir>, just use make -f <subdir>/Makefile.
This means we now call gcc/ld/... always from the topdir.
Advantages are:
o We don't need to use -I$(TOPDIR)/include and the like, just
-Iinclude works.
o __FILE__ gives the correct relative path from the topdir instead
of an absolute path, as it did before for included headers
o gcc errors/warnings give the correct relative path from the topdir
o takes us a step closer to a non-recursive build (though that's probably
as close as it gets)
The changes to Rules.make were done in a way which only uses the new way
for the standard recursive build (which remains recursive, just without
cd), all the archs do make -C arch/$(ARCH)/boot ..., which should keep
working as before. However, of course this should be converted eventually,
it's possible to do so piecemeal arch by arch.
It seems to work fine for most of the standard kernel. Potential places
which need changing are added -I flags to the command line, which now
need to have the path relative to the topdir and explicit rules for
generating files, which need to properly use $(obj) / $(src) to work
correctly.
---------------------------------------------------------------------------
diff -Nru a/Rules.make b/Rules.make
--- a/Rules.make Wed Oct 2 21:52:10 2002
+++ b/Rules.make Wed Oct 2 21:52:10 2002
@@ -25,22 +25,20 @@
$(warning kbuild: list-multi ($(list-multi)) is obsolete in 2.5. Please fix!)
endif
-# Figure out paths
+# Some paths for the Makefiles to use
# ---------------------------------------------------------------------------
-# Find the path relative to the toplevel dir, $(RELDIR), and express
-# the toplevel dir as a relative path from this dir, $(TOPDIR_REL)
-ifeq ($(findstring $(TOPDIR),$(CURDIR)),)
- # Can only happen when something is built out of tree
- RELDIR := $(CURDIR)
- TOPDIR_REL := $(TOPDIR)
-else
- RELDIR := $(subst $(TOPDIR)/,,$(CURDIR))
- TOPDIR_REL := $(subst $(space),,$(foreach d,$(subst /, ,$(RELDIR)),../))
+# FIXME. For now, we leave it possible to use make -C or make -f
+# to do work in subdirs.
+
+ifndef obj
+obj = .
+CFLAGS := $(patsubst -I%,-I$(TOPDIR)/%,$(patsubst -I$(TOPDIR)/%,-I%,$(CFLAGS)))
+AFLAGS := $(patsubst -I%,-I$(TOPDIR)/%,$(patsubst -I$(TOPDIR)/%,-I%,$(AFLAGS)))
endif
-# Some paths for the Makefiles to use
-# ---------------------------------------------------------------------------
+# For use in the quiet output
+echo_target = $@
# Usage:
#
@@ -58,12 +56,7 @@
# We don't support separate source / object yet, so these are just
# placeholders for now
-obj := .
-src := .
-
-# For use in the quiet output
-
-echo_target = $(RELDIR)/$@
+src := $(obj)
# Figure out what we need to build from the various variables
# ===========================================================================
@@ -120,6 +113,21 @@
# Only build module versions for files which are selected to be built
export-objs := $(filter $(export-objs),$(real-objs-y) $(real-objs-m))
+# Add subdir path
+
+EXTRA_TARGETS := $(addprefix $(obj)/,$(EXTRA_TARGETS))
+obj-y := $(addprefix $(obj)/,$(obj-y))
+obj-m := $(addprefix $(obj)/,$(obj-m))
+export-objs := $(addprefix $(obj)/,$(export-objs))
+subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
+real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
+real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
+multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
+multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
+multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
+multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
+subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
+
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
@@ -153,7 +161,7 @@
# This sets version suffixes on exported symbols
# ---------------------------------------------------------------------------
-MODVERDIR := $(TOPDIR)/include/linux/modules/$(RELDIR)
+MODVERDIR := include/linux/modules/$(obj)
#
# Added the SMP separator to stop module accidents between uniprocessor
@@ -183,7 +191,7 @@
# files (fix-dep filters them), so touch modversions.h if any of the .ver
# files changes
-quiet_cmd_cc_ver_c = MKVER include/linux/modules/$(RELDIR)/$*.ver
+quiet_cmd_cc_ver_c = MKVER include/linux/modules/$(obj)/$*.ver
cmd_cc_ver_c = $(CPP) $(c_flags) $< | $(GENKSYMS) $(genksyms_smp_prefix) \
-k $(VERSION).$(PATCHLEVEL).$(SUBLEVEL) > $@.tmp
@@ -216,8 +224,8 @@
targets := $(addprefix $(MODVERDIR)/,$(export-objs:.o=.ver))
fastdep: $(targets) $(subdir-ym)
- @mkdir -p $(dir $(addprefix $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR),$(export-objs:.o=.ver)))
- @touch $(addprefix $(TOPDIR)/.tmp_export-objs/modules/$(RELDIR)/,$(export-objs:.o=.ver))
+ @mkdir -p $(dir $(addprefix .tmp_export-objs/modules/,$(export-objs:.o=.ver)))
+ @touch $(addprefix .tmp_export-objs/modules/,$(export-objs:.o=.ver))
endif # export-objs
@@ -228,13 +236,15 @@
# Installing modules
# ==========================================================================
+quiet_cmd_modules_install = INSTALL $(obj-m)
+cmd_modules_install = mkdir -p $(MODLIB)/kernel/$(obj); \
+ cp $(obj-m) $(MODLIB)/kernel/$(obj)
+
.PHONY: modules_install
modules_install: $(subdir-ym)
ifneq ($(obj-m),)
- @echo Installing modules in $(MODLIB)/kernel/$(RELDIR)
- @mkdir -p $(MODLIB)/kernel/$(RELDIR)
- @cp $(obj-m) $(MODLIB)/kernel/$(RELDIR)
+ $(call cmd,modules_install)
else
@/bin/true
endif
@@ -250,8 +260,12 @@
ifndef O_TARGET
ifndef L_TARGET
-O_TARGET := built-in.o
+O_TARGET := $(obj)/built-in.o
+endif
endif
+
+ifdef L_TARGET
+L_TARGET := $(obj)/$(L_TARGET)
endif
first_rule: $(if $(KBUILD_BUILTIN),$(O_TARGET) $(L_TARGET) $(EXTRA_TARGETS)) \
@@ -368,7 +382,7 @@
#
quiet_cmd_link_multi = LD $(echo_target)
-cmd_link_multi = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) -r -o $@ $(filter $($(basename $@)-objs),$^)
+cmd_link_multi = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) -r -o $@ $(filter $(addprefix $(obj)/,$($(subst $(obj)/,,$(@:.o=-objs)))),$^)
# We would rather have a list of rules like
# foo.o: $(foo-objs)
@@ -388,6 +402,9 @@
host-progs-single := $(foreach m,$(host-progs),$(if $($(m)-objs),,$(m)))
host-progs-multi := $(foreach m,$(host-progs),$(if $($(m)-objs),$(m)))
host-progs-multi-objs := $(foreach m,$(host-progs-multi),$($(m)-objs))
+host-progs-single := $(addprefix $(obj)/,$(host-progs-single))
+host-progs-multi := $(addprefix $(obj)/,$(host-progs-multi))
+host-progs-multi-objs := $(addprefix $(obj)/,$(host-progs-multi-objs))
quiet_cmd_host_cc__c = HOSTCC $(echo_target)
cmd_host_cc__c = $(HOSTCC) -Wp,-MD,$(depfile) \
@@ -405,7 +422,7 @@
$(call if_changed_dep,host_cc_o_c)
quiet_cmd_host_cc__o = HOSTLD $(echo_target)
-cmd_host_cc__o = $(HOSTCC) $(HOSTLDFLAGS) -o $@ $($@-objs) \
+cmd_host_cc__o = $(HOSTCC) $(HOSTLDFLAGS) -o $@ $(addprefix $(obj)/,$($(subst $(obj)/,,$@)-objs)) \
$(HOST_LOADLIBES)
$(host-progs-multi): %: $(host-progs-multi-objs) FORCE
@@ -583,5 +600,7 @@
# $(call descend,<dir>,<target>)
# Recursively call a sub-make in <dir> with target <target>
-descend = $(MAKE) -C $(1) $(2)
-
+ifeq ($(KBUILD_VERBOSE),1)
+descend = echo '$(MAKE) -f $(1)/Makefile $(2)';
+endif
+descend += $(MAKE) -f $(1)/Makefile obj=$(1) $(2)
diff -Nru a/arch/i386/Makefile b/arch/i386/Makefile
--- a/arch/i386/Makefile Wed Oct 2 21:52:10 2002
+++ b/arch/i386/Makefile Wed Oct 2 21:52:10 2002
@@ -98,8 +98,8 @@
drivers-$(CONFIG_MATH_EMULATION) += arch/i386/math-emu/
drivers-$(CONFIG_PCI) += arch/i386/pci/
-CFLAGS += -I$(TOPDIR)/arch/i386/$(MACHINE)
-AFLAGS += -I$(TOPDIR)/arch/i386/$(MACHINE)
+CFLAGS += -Iarch/i386/$(MACHINE)
+AFLAGS += -Iarch/i386/$(MACHINE)
MAKEBOOT = +$(MAKE) -C arch/$(ARCH)/boot
diff -Nru a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile
--- a/arch/i386/boot/Makefile Wed Oct 2 21:52:10 2002
+++ b/arch/i386/boot/Makefile Wed Oct 2 21:52:10 2002
@@ -44,7 +44,7 @@
bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
bzImage: BUILDFLAGS := -b
-quiet_cmd_image = BUILD $(RELDIR)/$@
+quiet_cmd_image = BUILD $(echo_target)
cmd_image = tools/build $(BUILDFLAGS) bootsect setup vmlinux.bin \
$(ROOT_DEV) > $@
diff -Nru a/drivers/acpi/Makefile b/drivers/acpi/Makefile
--- a/drivers/acpi/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/acpi/Makefile Wed Oct 2 21:52:10 2002
@@ -4,7 +4,7 @@
export ACPI_CFLAGS
-ACPI_CFLAGS := -D_LINUX -I$(CURDIR)/include
+ACPI_CFLAGS := -D_LINUX -Idrivers/acpi/include
ifdef CONFIG_ACPI_DEBUG
ACPI_CFLAGS += -DACPI_DEBUG_OUTPUT
diff -Nru a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
--- a/drivers/ide/arm/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/ide/arm/Makefile Wed Oct 2 21:52:10 2002
@@ -2,6 +2,6 @@
obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
-EXTRA_CFLAGS := -I../
+EXTRA_CFLAGS := -Idrivers/ide
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile
--- a/drivers/ide/legacy/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/ide/legacy/Makefile Wed Oct 2 21:52:10 2002
@@ -17,6 +17,6 @@
# Last of all
obj-$(CONFIG_BLK_DEV_HD) += hd.o
-EXTRA_CFLAGS := -I../
+EXTRA_CFLAGS := -Idrivers/ide
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
--- a/drivers/ide/pci/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/ide/pci/Makefile Wed Oct 2 21:52:10 2002
@@ -31,6 +31,6 @@
# Must appear at the end of the block
obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o
-EXTRA_CFLAGS := -I../
+EXTRA_CFLAGS := -Idrivers/ide
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile
--- a/drivers/ide/ppc/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/ide/ppc/Makefile Wed Oct 2 21:52:10 2002
@@ -3,6 +3,6 @@
obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o
-EXTRA_CFLAGS := -I../
+EXTRA_CFLAGS := -Idrivers/ide
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
--- a/drivers/message/fusion/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/message/fusion/Makefile Wed Oct 2 21:52:10 2002
@@ -13,7 +13,7 @@
# # sparc64
#EXTRA_CFLAGS += -gstabs+
-EXTRA_CFLAGS += -I. ${MPT_CFLAGS}
+EXTRA_CFLAGS += ${MPT_CFLAGS}
# Fusion MPT drivers; recognized debug defines...
# MPT general:
diff -Nru a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
--- a/drivers/net/sk98lin/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/net/sk98lin/Makefile Wed Oct 2 21:52:10 2002
@@ -55,7 +55,7 @@
# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
-EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
+EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_USE_CSUM $(DBGDEF)
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/net/skfp/Makefile b/drivers/net/skfp/Makefile
--- a/drivers/net/skfp/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/net/skfp/Makefile Wed Oct 2 21:52:10 2002
@@ -17,7 +17,7 @@
# projects. To keep the source common for all those drivers (and
# thus simplify fixes to it), please do not clean it up!
-EXTRA_CFLAGS += -I. -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
+EXTRA_CFLAGS += -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/scsi/sym53c8xx_2/Makefile b/drivers/scsi/sym53c8xx_2/Makefile
--- a/drivers/scsi/sym53c8xx_2/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/scsi/sym53c8xx_2/Makefile Wed Oct 2 21:52:10 2002
@@ -3,7 +3,5 @@
sym53c8xx-objs := sym_fw.o sym_glue.o sym_hipd.o sym_malloc.o sym_misc.o sym_nvram.o
obj-$(CONFIG_SCSI_SYM53C8XX_2) := sym53c8xx.o
-EXTRA_CFLAGS += -I.
-
include $(TOPDIR)/Rules.make
diff -Nru a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
--- a/drivers/usb/storage/Makefile Wed Oct 2 21:52:10 2002
+++ b/drivers/usb/storage/Makefile Wed Oct 2 21:52:10 2002
@@ -5,7 +5,7 @@
# Rewritten to use lists instead of if-statements.
#
-EXTRA_CFLAGS := -I../../scsi/
+EXTRA_CFLAGS := -Idrivers/scsi
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
diff -Nru a/fs/xfs/Makefile b/fs/xfs/Makefile
--- a/fs/xfs/Makefile Wed Oct 2 21:52:10 2002
+++ b/fs/xfs/Makefile Wed Oct 2 21:52:10 2002
@@ -32,10 +32,10 @@
# Makefile for XFS on Linux.
#
-# This needs -I. because everything does #include <xfs.h> instead of "xfs.h".
+# This needs -I because everything does #include <xfs.h> instead of "xfs.h".
# The code is wrong, local files should be included using "xfs.h", not <xfs.h>
# but I am not going to change every file at the moment.
-EXTRA_CFLAGS += -I. -funsigned-char
+EXTRA_CFLAGS += -Ifs/xfs -funsigned-char
ifeq ($(CONFIG_XFS_DEBUG),y)
EXTRA_CFLAGS += -g -DSTATIC="" -DDEBUG -DXFSDEBUG
@@ -154,6 +154,6 @@
endif
endif
-CFLAGS_xfsidbg.o += -I $(TOPDIR)/arch/$(ARCH)/kdb
+CFLAGS_xfsidbg.o += -Iarch/$(ARCH)/kdb
include $(TOPDIR)/Rules.make
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:37 EST