Hi!
On Sun, Sep 22, 2002 at 01:42:07PM +0200, Mikael Pettersson wrote:
> On Sat, 21 Sep 2002 17:43:48 +0200, Banai Zoltan wrote:
> >I have a problem with kernels >2.4.17,
> >booting them i got error message
> >ESR bad value enabling vector 00000004
> >Using 2.2.x and <=2.4.17 there is no probelm
> >
> >The hardware is an Intergraph TDZ-310
> >PPro-200Mhz, 450KX/GX chipset.
> >
> >My config with 2.4.19-ac4 (is similar to configs
> >use with 2.4.9 with JFS) is attached.
>
> There is no such message in a standard 2.4.19 kernel.
> Please post the _exact_ message(s). Also, are you sure it's
> an error and not just informational? Does the box work?
Sorry! You are right, i did not had time for write it down
becouse it is a production system.
But i grepped the source and found the right message in:
./arch/i386/kernel/apic.c so the message i seen was:
printk("ESR value before enabling vector: %08lx\n", value);
and the system stopped booting after that.
(This is a MP motherboard with one processor.)
Disabling
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
makes system boot!
I attach the lcpci -v output hoping it will help.
>
> /Mikael
>
Regards,
-- Banai Zoltan
This archive was generated by hypermail 2b29 : Mon Sep 23 2002 - 22:00:35 EST