Hi list,
as instructed I'm making contact (attached dmesg). IBM claims that machine
is supported under linux (RedHat Advanced Server 2.1) but I couldn't find any
patches. Is it possible that RedHat is hiding some patches from linux
community? :)
The problem is that /proc/cpuinfo shows at most 4 processors (depending on
kernel version). Dmesg shows many "APIC error on CPUx: 00(80)" errors.
I can provide you with further details (make some tests) if needed.
Kernel is preemptible and is compiled with bigmem and acpi enabled.
Linux version 2.5.34 (root@levi) (gcc version 2.95.4 20011002 (Debian
prerelease)) #2 SMP czw wrz 12 16:32:16 CEST 2002
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffb6fc0 (usable)
BIOS-e820: 00000000dffb6fc0 - 00000000dffbf800 (ACPI data)
BIOS-e820: 00000000dffbf800 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
3712MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009dd40
hm, page 0009d000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org
if you experience SMP problems!
On node 0 totalpages: 1179648
DMA zone: 4096 pages
Normal zone: 225280 pages
HighMem zone: 950272 pages
ACPI: RSDP (v000 IBM ) @ 0x000fdba0
ACPI: RSDT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf780
ACPI: FADT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf700
ACPI: MADT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf600
ACPI: SRAT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf4c0
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
Processor #16 invalid (max 16)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
Processor #18 invalid (max 16)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x20] enabled)
Processor #32 invalid (max 16)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x22] enabled)
Processor #34 invalid (max 16)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x30] enabled)
Processor #48 invalid (max 16)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x32] enabled)
Processor #50 invalid (max 16)
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 14
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, IRQ 0-50
ACPI: IOAPIC (id[0x0d] address[0xfec01000] global_irq_base[0x33])
IOAPIC[1]: Assigned apic_id 13
IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, IRQ 51-101
ACPI: INT_SRC_OVR (bus[0] irq[0x8] global_irq[0x8] polarity[0x3] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0xe] global_irq[0xe] polarity[0x1] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x24] polarity[0x0]
trigger[0x0])
Using ACPI (MADT) for SMP configuration information
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
Kernel command line: auto BOOT_IMAGE=linux-2.5 root=802
BOOT_FILE=/boot/linux-2.5
Initializing CPU#0
Detected 1397.813 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2703.36 BogoMIPS
Memory: 4139296k/4718592k available (1788k kernel code, 54316k reserved, 817k
data, 120k init, 3276504k highmem)
Security Scaffold v1.0.0 initialized
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal LVT vector (0xf0) already installed
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel Pentium 4 (Unknown) stepping 01
per-CPU timeslice cutoff: 731.82 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/2 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
mtrr: SMP support incomplete for this vendor
Calibrating delay loop... 2785.28 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#1: Thermal monitoring enabled
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU1: Intel Pentium 4 (Unknown) stepping 01
Total of 2 processors activated (5488.64 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-0, 14-2, 14-16, 14-17, 14-18, 14-19, 14-20, 14-21,
14-22, 14-23, 14-24, 14-25, 14-26, 14-27, 14-28, 14-29, 14-30, 14-31, 14-32,
14-33, 14-34,
14-35, 14-37, 14-38, 14-39, 14-40, 14-41, 14-42, 14-43, 14-44, 14-45, 14-46,
14-47, 14-48, 14-49, 14-50, 13-0, 13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7,
13-8, 13-9, 13
-10, 13-11, 13-12, 13-13, 13-14, 13-15, 13-16, 13-17, 13-18, 13-19, 13-20,
13-21, 13-22, 13-23, 13-24, 13-25, 13-26, 13-27, 13-28, 13-29, 13-30, 13-31,
13-32, 13-33, 1
3-34, 13-35, 13-36, 13-37, 13-38, 13-39, 13-40, 13-41, 13-42, 13-43, 13-44,
13-45, 13-46, 13-47, 13-48, 13-49, 13-50 not connected.
..TIMER: vector=0x31 pin1=-1 pin2=0
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 16.
number of IO-APIC #14 registers: 51.
number of IO-APIC #13 registers: 51.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 00320011
....... : max redirection entries: 0032
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 1 1 31
01 001 01 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 1 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 001 01 0 0 0 0 0 1 1 71
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 000 00 1 0 0 0 0 0 0 00
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
2f 000 00 1 0 0 0 0 0 0 00
30 000 00 1 0 0 0 0 0 0 00
31 000 00 1 0 0 0 0 0 0 00
32 000 00 1 0 0 0 0 0 0 00
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
.... register #01: 00320011
....... : max redirection entries: 0032
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 000 00 1 0 0 0 0 0 0 00
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 000 00 1 0 0 0 0 0 0 00
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
2f 000 00 1 0 0 0 0 0 0 00
30 000 00 1 0 0 0 0 0 0 00
31 000 00 1 0 0 0 0 0 0 00
32 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9-> 0:36
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1396.0951 MHz.
..... host bus clock speed is 99.0782 MHz.
cpu: 0, clocks: 99782, slice: 3023
CPU0<T0:99776,T1:96752,D:1,S:3023,C:99782>
checking TSC synchronization across 2 CPUs: passed.
Starting migration thread for cpu 0
Bringing up 1
cpu: 1, clocks: 99782, slice: 3023
CPU1<T0:99776,T1:93728,D:2,S:3023,C:99782>
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
CPUS done 4294967295
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfd30d, last bus=11
PCI: Using configuration type 1
ACPI: Subsystem revision 20020829
APIC error on CPU0: 00(80)
APIC error on CPU1: 00(80)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI5] (00:05)
PCI: Probing PCI hardware (bus 05)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI5._PRT]
ACPI: PCI Root Bridge [PCI7] (00:07)
PCI: Probing PCI hardware (bus 07)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI7._PRT]
ACPI: PCI Root Bridge [PCI9] (00:09)
PCI: Probing PCI hardware (bus 09)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI9._PRT]
ACPI: PCI Interrupt Link [LVIA] (IRQs *9)
ACPI: PCI Interrupt Link [LVIB] (IRQs *10)
ACPI: PCI Interrupt Link [LVIC] (IRQs *3)
ACPI: PCI Interrupt Link [LVID] (IRQs *5)
ACPI: PCI Interrupt Link [LVUS] (IRQs *7)
ACPI: PCI Interrupt Link [LHS1] (IRQs *5)
ACPI: PCI Interrupt Link [LHS2] (IRQs *5)
ACPI: PCI Interrupt Link [LHS3] (IRQs *5)
ACPI: PCI Interrupt Link [LHS4] (IRQs *10)
ACPI: PCI Interrupt Link [LHS5] (IRQs *11)
ACPI: PCI Interrupt Link [LHS6] (IRQs *15)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
IOAPIC[0]: Set PCI routing entry (14-39 -> 0xa9 -> IRQ 39)
00:00:03[A] -> 14-39 -> vector 0xa9 -> IRQ 39
IOAPIC[0]: Set PCI routing entry (14-16 -> 0xb1 -> IRQ 16)
00:00:04[A] -> 14-16 -> vector 0xb1 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (14-17 -> 0xb9 -> IRQ 17)
00:00:04[B] -> 14-17 -> vector 0xb9 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (14-47 -> 0xc1 -> IRQ 47)
00:00:05[D] -> 14-47 -> vector 0xc1 -> IRQ 47
IOAPIC[0]: Set PCI routing entry (14-40 -> 0xc9 -> IRQ 40)
00:01:03[A] -> 14-40 -> vector 0xc9 -> IRQ 40
IOAPIC[0]: Set PCI routing entry (14-41 -> 0xd1 -> IRQ 41)
00:01:03[B] -> 14-41 -> vector 0xd1 -> IRQ 41
IOAPIC[0]: Set PCI routing entry (14-42 -> 0xd9 -> IRQ 42)
00:01:04[A] -> 14-42 -> vector 0xd9 -> IRQ 42
IOAPIC[1]: Set PCI routing entry (13-0 -> 0xe1 -> IRQ 51)
00:02:01[A] -> 13-0 -> vector 0xe1 -> IRQ 51
IOAPIC[1]: Set PCI routing entry (13-1 -> 0xe9 -> IRQ 52)
00:02:01[B] -> 13-1 -> vector 0xe9 -> IRQ 52
IOAPIC[1]: Set PCI routing entry (13-2 -> 0x32 -> IRQ 53)
00:02:01[C] -> 13-2 -> vector 0x32 -> IRQ 53
IOAPIC[1]: Set PCI routing entry (13-3 -> 0x3a -> IRQ 54)
00:02:01[D] -> 13-3 -> vector 0x3a -> IRQ 54
IOAPIC[1]: Set PCI routing entry (13-4 -> 0x42 -> IRQ 55)
00:02:02[A] -> 13-4 -> vector 0x42 -> IRQ 55
IOAPIC[1]: Set PCI routing entry (13-5 -> 0x4a -> IRQ 56)
00:02:02[B] -> 13-5 -> vector 0x4a -> IRQ 56
IOAPIC[1]: Set PCI routing entry (13-6 -> 0x52 -> IRQ 57)
00:02:02[C] -> 13-6 -> vector 0x52 -> IRQ 57
IOAPIC[1]: Set PCI routing entry (13-7 -> 0x5a -> IRQ 58)
00:02:02[D] -> 13-7 -> vector 0x5a -> IRQ 58
IOAPIC[1]: Set PCI routing entry (13-20 -> 0x62 -> IRQ 71)
00:05:04[A] -> 13-20 -> vector 0x62 -> IRQ 71
IOAPIC[1]: Set PCI routing entry (13-21 -> 0x6a -> IRQ 72)
00:05:04[B] -> 13-21 -> vector 0x6a -> IRQ 72
IOAPIC[1]: Set PCI routing entry (13-22 -> 0x72 -> IRQ 73)
00:05:04[C] -> 13-22 -> vector 0x72 -> IRQ 73
IOAPIC[1]: Set PCI routing entry (13-23 -> 0x7a -> IRQ 74)
00:05:04[D] -> 13-23 -> vector 0x7a -> IRQ 74
IOAPIC[1]: Set PCI routing entry (13-16 -> 0x82 -> IRQ 67)
00:07:03[A] -> 13-16 -> vector 0x82 -> IRQ 67
IOAPIC[1]: Set PCI routing entry (13-17 -> 0x8a -> IRQ 68)
00:07:03[B] -> 13-17 -> vector 0x8a -> IRQ 68
IOAPIC[1]: Set PCI routing entry (13-18 -> 0x92 -> IRQ 69)
00:07:03[C] -> 13-18 -> vector 0x92 -> IRQ 69
IOAPIC[1]: Set PCI routing entry (13-19 -> 0x9a -> IRQ 70)
00:07:03[D] -> 13-19 -> vector 0x9a -> IRQ 70
IOAPIC[1]: Set PCI routing entry (13-8 -> 0xa2 -> IRQ 59)
00:09:01[A] -> 13-8 -> vector 0xa2 -> IRQ 59
IOAPIC[1]: Set PCI routing entry (13-9 -> 0xaa -> IRQ 60)
00:09:01[B] -> 13-9 -> vector 0xaa -> IRQ 60
IOAPIC[1]: Set PCI routing entry (13-10 -> 0xb2 -> IRQ 61)
00:09:01[C] -> 13-10 -> vector 0xb2 -> IRQ 61
IOAPIC[1]: Set PCI routing entry (13-11 -> 0xba -> IRQ 62)
00:09:01[D] -> 13-11 -> vector 0xba -> IRQ 62
IOAPIC[1]: Set PCI routing entry (13-12 -> 0xc2 -> IRQ 63)
00:09:02[A] -> 13-12 -> vector 0xc2 -> IRQ 63
IOAPIC[1]: Set PCI routing entry (13-13 -> 0xca -> IRQ 64)
00:09:02[B] -> 13-13 -> vector 0xca -> IRQ 64
IOAPIC[1]: Set PCI routing entry (13-14 -> 0xd2 -> IRQ 65)
00:09:02[C] -> 13-14 -> vector 0xd2 -> IRQ 65
IOAPIC[1]: Set PCI routing entry (13-15 -> 0xda -> IRQ 66)
00:09:02[D] -> 13-15 -> vector 0xda -> IRQ 66
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi'
Starting kswapd
highmem bounce pool size: 64 pages
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec: init pool 0, 1 entries, 12 bytes
biovec: init pool 1, 4 entries, 48 bytes
biovec: init pool 2, 16 entries, 192 bytes
biovec: init pool 3, 64 entries, 768 bytes
biovec: init pool 4, 128 entries, 1536 bytes
biovec: init pool 5, 256 entries, 3072 bytes
aio_setup: sizeof(struct page) = 44
Journalled Block Device driver loaded
Capability LSM initialized
PCI: Enabling Via external APIC routing
PCI: Via IRQ fixup for 00:05.2, from 7 to 15
PCI: Via IRQ fixup for 00:05.3, from 7 to 15
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CP07] (supports C1)
ACPI: Processor [CP06] (supports C1)
ACPI: Processor [CP05] (supports C1)
ACPI: Processor [CP04] (supports C1)
ACPI: Processor [CP03] (supports C1)
ACPI: Processor [CP02] (supports C1)
ACPI: Processor [CP01] (supports C1)
ACPI: Processor [CP00] (supports C1)
-- Mariusz Zielinski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 15 2002 - 22:00:29 EST