Problems with routing, solutions and more problems.

From: Stefan Smietanowski (stesmi@stesmi.com)
Date: Fri Aug 23 2002 - 09:47:01 EST


Hi people.

I have the following scenario:

I have a linux box with 2 serial ports and an ethernet.

Those serial ports are connected to 2 modems.

I have 500 other machines out in the field. Let's call them toasters.
These toasters have a modem and a phoneline each. They all have the
same IP number, 192.168.0.1. They can't have anything BUT static ip.

I can call any of these 500 machines using any of my 2 modems,
but it for natural reasons does not work when I call 2 machines
at the same time since they have the same IP.

So I devised this idea:

I invent a fake ip number for the interfaces.

I don't change the actual ip on the interface, just virtually.

My idea is that: any packet going to 192.168.10.1 should go out over
modem0 and go to 192.168.1.1 and any packet going to 192.168.11.1
should go out over modem1 and go to 192.168.1.1.

So, I use netfilter, MANGLE, OUTPUT to tag each packet going to
192.168.10.1 with fwmark 10 and each packet going to 192.168.11.1 with
fwmark 11.

Kernel is 2.4.19, otherwise this step wouldn't work:

I NAT each packet using NAT, OUTPUT so that each packet going to
192.168.10.1 gets nat'ed to 192.168.1.1 and each packet going to
192.168.11.1 gets net'ed to 192.168.1.1.

A packet that should go on modem0 now has the destination IP of
192.168.1.1 and is tagged 10 and a packet that should go on modem1
now has a destination IP of 192.168.1.1 and is tagged 11.

I then add 2 routing tables, one for modem0 and one for modem1. They
just say that everything to 192.168.1.1 go out on ppp0 and ppp1
respectively.

Then I add an ip RULE that says that everything with fwmark 10
gets to routing table for modem0 and everything with fwmark 11
gets to routing table for modem1.

This sounds great and it actually works.

My problem now is that I believe the route cache is bypassing all my
junk in the routing and just sends it to the last place sent, as
everything works but it's being sent to ppp0 all the time.

If anyone thinks I'm wrong, please say so.

Now, is there a way to disable the route cache totally or for a specific
ip range?

// Stefan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Aug 23 2002 - 22:00:28 EST