Re: Part 2: Re: [PATCH] pdc20265 problem.

From: Petr Vandrovec (VANDROVE@vc.cvut.cz)
Date: Thu Aug 08 2002 - 14:01:36 EST


On 8 Aug 02 at 11:43, Andre Hedrick wrote:
> On Thu, 8 Aug 2002, Petr Vandrovec wrote:
> > On 8 Aug 02 at 10:41, Andre Hedrick wrote:
> >
> > > ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31
> > > ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31
> > > ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
> >
> > This is definitely bug. It should assigned ide0 to the port
> > in legacy mode, as far as I can tell.
>
> Again you have no experience in the logic!
>
> This boots with Promise first because of BIOS Logic with INT19 hooks.
> IE, that which I referenced in the documents that I know you did not read
> but come back and state it has nothing to do with the issues.

> Electrons wasted :-/

Yes, exactly. If you really believe that ide# (or even hd#) numbering
should change according to the BIOS boot order, then there is certainly
nothing we can agree on. And if I boot from floppy or SCSI, should IDE
code skip ide0/hda at all?

Maybe you did not notice that Linux can boot of /dev/hde, it does not
have to boot from /dev/hda. Just tell to LILO where /dev/hde lives (and
there are patches for EDD support, but adding two lines into /etc/lilo.conf
is easier than patching support for EDD structure, which is broken in 50%
of BIOSes I know anyway).
                                                    Petr
                                                    
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:17 EST