USB and PCMCIA drop out simultaneously during heavy data transfers (2.4.18)

From: Vassili Papavassiliou (pvs@NMSU.Edu)
Date: Tue Jul 23 2002 - 19:33:08 EST


Hello,
    This is a problem I reported on July 19; unfortunately, because of a typo,
the subject header did not appear. Briefly, during traffic through a PCMCIA
card (Ethernet, WiFi, or SCSI adapter), both PCMCIA and USB time out if there
is any USB activity at the time (such as moving a mouse). Otherwise they can
coexist for days. After the timeout PCMCIA cannot be restarted until the USB
modules are removed. This makes USB essentially unusable in this machine, as
there is always some PC card in use. In 2.2.xx, this issue only showed up with
CardBus cards.

    I apologize for reposting, but I think it's a real problem that may only
show up in older, slow machines, which is why I haven't seen any references to
it, and the absence of a subject in my original post probably made it useless.
Details are in the archived original message, e.g. in
http://www.uwsg.indiana.edu/hypermail/linux/kernel/0207.2/0884.html

    If anybody has any ideas, please CC also to pvs@nmsu.edu and thanks in
advance.
                                                      Vassili Papavassiliou

-- 
Vassili Papavassiliou             E-mail: pvs@nmsu.edu
NMSU, Physics Dept.               Phone: (505) 646-1310
Las Cruces, NM 88003              Fax:   (505) 646-1934

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Jul 23 2002 - 22:00:45 EST