Hello again,
modprobe ne2k-pci debug=3 full_duplex=1
tail -f /var/log/messages
Jul 11 11:00:24 firex kernel: ne2k-pci.c: v1.02 for Linux 2.2,
10/19/2000, D. Becker/P. Gortmaker,
http://www.scyld.com/network/ne2k-pci.html
Jul 11 11:00:24 firex kernel: ne2k-pci.c: PCI NE2000 clone 'RealTek
RTL-8029' at I/O 0x6000, IRQ 12.
Jul 11 11:00:24 firex kernel: eth0: RealTek RTL-8029 found at 0x6000,
IRQ 12, 00:00:21:6A:BB:9F.
Jul 11 11:00:24 firex kernel: ne2k-pci.c: PCI NE2000 clone 'RealTek
RTL-8029' at I/O 0x6100, IRQ 11.
Jul 11 11:00:24 firex kernel: eth1: RealTek RTL-8029 found at 0x6100,
IRQ 11, 00:00:21:22:12:4A.
after that: ifup eth0 and ifup eth1
and test with net2k-pci-diag
./net2k-pci-diag -a
ne2k-pci-diag.c:v2.04a 6/19/2002 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Realtek 8029 adapter at 0x6000.
The 8390 core appears to be active, so some registers will not be read.
To see all register values use the '-f' flag.
Initial window 3, registers values by window:
Window 0: 22 00 76 7f 1e 00 8f 00 2a 40 50 43 81 00 00 00.
Window 1: 62 00 00 21 6a bb 9f 4c 00 00 00 80 00 00 00 00.
Window 2: a2 00 80 ff 40 ff ff ff ff ff ff ff cc e0 c9 bf.
Window 3: e2 30 ff 04 ff 00 30 ff ff ff ff ff ff ff 29 80.
RTL8029 transceiver: 10baseT/coax (autoselected on 10baseT link beat)
half duplex.
0K boot ROM.
No interrupt sources are pending (00).
Parsing the EEPROM of a RTL8029:
Station Address 00:00:21:6A:BB:9F (used as the ethernet address).
Configuration is 30 00:
0K boot ROM, half duplex
Transceiver: 10baseT/coax (autoselected on 10baseT link beat).
PCI Vendor ID 0xffff Device ID 0xffff
Subsystem ID: vendor 0xffff device 0xffff
Index #2: Found a Realtek 8029 adapter at 0x6100.
The 8390 core appears to be active, so some registers will not be read.
To see all register values use the '-f' flag.
Initial window 2, registers values by window:
Window 0: 22 04 65 64 03 00 0e 00 5a 46 50 43 01 00 00 00.
Window 1: 62 00 00 21 22 12 4a 65 00 00 00 80 00 00 00 00.
Window 2: a2 00 80 ff 46 ff ff ff ff ff ff ff cc e0 c9 bf.
Window 3: e2 30 ff 00 ff 00 30 ff ff ff ff ff ff ff 29 80.
RTL8029 transceiver: 10baseT/coax (autoselected on 10baseT link beat)
half duplex.
0K boot ROM.
No interrupt sources are pending (00).
Parsing the EEPROM of a RTL8029:
Station Address 00:00:21:22:12:4A (used as the ethernet address).
Configuration is 30 00:
0K boot ROM, half duplex
Transceiver: 10baseT/coax (autoselected on 10baseT link beat).
PCI Vendor ID 0xffff Device ID 0xffff
Subsystem ID: vendor 0xffff device 0xffff
Any ideas now? ne2k-pci-diag seems to report that booth ethernet cards
are still in half-duplex mode.
Best Regards,
Mihai
On Wednesday 10 July 2002 15:03, you wrote:
> On Wed, 10 Jul 2002, Gogu Mihai wrote:
> > Hello Linux experts,
>
> Hi,
>
> > I don`t know i a came to the right place.
> >
> > I need a little help. On my router i have 2 ethernet cards Realtek
> > 8029/bnc+utp.
> >
> > I read the documentation found on
> > http://www.scyld.com/network/ne2k-pci.html and according to this i
> > configured:
> >
> > cat /etc/modules.conf
> > alias eth0 ne2k-pci
> > options ne2k-pci debug=3 full_duplex=1
> > alias eth1 ne2k-pci
> > options ne2k-pci debug=3 full_duplex=1
>
> ^^^^^^^
> ... and tell us more!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jul 15 2002 - 22:00:19 EST