IRQ sharing problem - 2.4.18 kernel

From: Lists (lst) (linux@lapd.cj.edu.ro)
Date: Fri Jun 28 2002 - 03:32:18 EST


Hi,
I have a TYAN Tiger 200T M/B with 2xIntel PIII CPUs at 1GHz and 1,3GB RAM.
I'm using RadHat up to date and 2.4.18 vanilla kernel. On heavy load on
ethernet interfaces (eth1,2,3,4) and scsi controller which are on the same
IRQ (11) my server stops responding.

Thease are the erros given by kernel:
Jun 27 21:56:27 lapd eth3: Promiscuous mode enabled.
Jun 27 21:56:27 lapd NETDEV WATCHDOG: eth4: transmit timed out
Jun 27 21:56:27 lapd eth4: Tx queue start entry 4 dirty entry 0.
Jun 27 21:56:27 lapd eth4: Tx descriptor 0 is 00002000. (queue head)
Jun 27 21:56:27 lapd eth4: Tx descriptor 1 is 00002000.
Jun 27 21:56:27 lapd eth4: Tx descriptor 2 is 00002000.
Jun 27 21:56:27 lapd eth4: Tx descriptor 3 is 00002000.
Jun 27 21:56:27 lapd eth4: Setting half-duplex based on auto-negotiated partner ability 0000.
Jun 27 21:56:27 lapd eth4: Promiscuous mode enabled.
Jun 27 21:56:39 lapd NETDEV WATCHDOG: eth3: transmit timed out
Jun 27 21:56:39 lapd eth3: Tx queue start entry 4 dirty entry 0.
Jun 27 21:56:39 lapd eth3: Tx descriptor 0 is 00002000. (queue head)
Jun 27 21:56:39 lapd eth3: Tx descriptor 1 is 00002000.
Jun 27 21:56:39 lapd eth3: Tx descriptor 2 is 00002000.
Jun 27 21:56:39 lapd eth3: Tx descriptor 3 is 00002000.
Jun 27 21:56:39 lapd eth3: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1

How can I put the eths on different IRQs?
This is the IRQ router MAP table:
PCI->APIC IRQ transform: (B0,I6,P0) -> 5
PCI->APIC IRQ transform: (B0,I7,P3) -> 5
PCI->APIC IRQ transform: (B0,I7,P3) -> 5
PCI->APIC IRQ transform: (B0,I13,P0) -> 11
PCI->APIC IRQ transform: (B0,I14,P0) -> 11
PCI->APIC IRQ transform: (B0,I15,P0) -> 11
PCI->APIC IRQ transform: (B0,I16,P0) -> 11
PCI->APIC IRQ transform: (B0,I17,P0) -> 5
PCI->APIC IRQ transform: (B0,I18,P0) -> 11
PCI->APIC IRQ transform: (B0,I19,P0) -> 10

# cat /proc/interrupts
           CPU0 CPU1
  0: 51399 64321 IO-APIC-edge timer
  1: 1981 2474 IO-APIC-edge keyboard
  2: 0 0 XT-PIC cascade
  3: 1 0 IO-APIC-edge serial
  5: 444 551 IO-APIC-level eth0
  9: 0 1 IO-APIC-edge acpi
 11: 8984 9458 IO-APIC-level ncr53c8xx, eth1, eth2, eth3, eth4
 Here is my problem ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 12: 7375 9158 IO-APIC-edge PS/2 Mouse
 14: 10644 8483 IO-APIC-edge ide0
 15: 10 13 IO-APIC-edge ide1
NMI: 0 0
LOC: 115618 115638
ERR: 3
MIS: 2

I tried to change the IRQs with pirq and ether at the boot time but it
dosen't work.

Thanx,
Cosmin

-- 
NetAdm at "Alexandru Papiu Ilarian" Highschool Dej
       e-mail: <doom@lapd.cj.edu.ro> LRU:  #192084
     phone: +40-264.211.421 int 25 +40-723.514.225
It's nice to be important
But is more important to be nice
---

--- Pentru dezabonare, trimiteti mail la listar@lug.ro cu subiectul 'unsubscribe rlug'. REGULI, arhive si alte informatii: http://www.lug.ro/mlist/

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:13 EST