Re: VIA KT266 PCI-related crashes fixed. Now whats the catch?

From: Denis Vlasenko (vda@port.imtp.ilyichevsk.odessa.ua)
Date: Thu Jun 20 2002 - 13:51:52 EST


On 20 June 2002 01:46, Jonathan A. Davis wrote:
> On Wed, 19 Jun 2002, Denis Vlasenko wrote:
> > Heh... doc says 0x00 and 0x10 are the same for reg 0x76...
> > did you test with 0x76 unchanged?
>
> I don't know what 0x76 does exactly, but I can say there is a very real
> difference between 0x00 and 0x10 on my system. Leaving the register
> unchanged (0x10) results in system hangs. They are a little harder to
> provoke than running without any changes, but they could still be
> triggered under severe disk load. Clearing that register and the same
> tests run to completion (I've done about 5 iterations). Perhaps this may
> be unique to specific board designs or chip steppings. Clearing 0x76 and
> leaving 0x75 with it's initial value results in hangs that trigger just
> about as quickly (subjectively) as leaving both registers in their
> original state.

Do you plan to submit a patch?

I'm heavily overloaded at the moment by totally non-Linux work right now
(Win NT / Oracle madness. In their world I need several CDs with faulty
installer just for client-side TCP/IP protocol stack. I feel very bad.
Shoot me someone!).

But if you really need some help, mail me.

--
vda
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jun 23 2002 - 22:00:22 EST