Re: 2.5.22 ide disk hang on boot

From: Martin Dalecki (dalecki@evision-ventures.com)
Date: Tue Jun 18 2002 - 01:31:08 EST


Użytkownik Arnd Bergmann napisał:
> Hi,
>
> In 2.5.22, I get during the partition detection (2.5.21 was ok):
>
> ...
> /dev/ide/host0/bus0/target0/lun0: [PTBC] (6201/240/63) p1 p2 p3 <hda: status
> error: status = 0x58 [drive ready seek complete data request]
> hda: recalibrating
>
> After that, I have to reboot. The machine is an IBM thinkpad A30p, the
> ide controller is an ICH3 ("Intel Corp. 82801CAM IDE U100 (rev 1)") and
> the drive says it is "IC25T048ATDA05-0".
> I tried reverting the last IDE patches but got too many rejects.
>
> After replacing the ata_error that came last with BUG(), I got the
> backtrace below (assuming I copied every address correctly from the
> screen).
>
> Arnd <><
>
> Trace; c01f9242 <ata_status_poll+92/c8>
> Trace; c01fb2d1 <start_request+c5/17c>
> Trace; c01eb38a <__elv_next_request+a/10>

I assume that the system in question isn't:

1. Isn't setting up the drive in BIOS for DMA operation?

2. Isn't showring the hda: hda1.... partition layout?

As one can see from the above the problem is caused by PIO
read getting worser. I know the problem and am working on it.
As a band plase apply patch -p1 -R < ide-clean-92.diff.
I hope I can provide the proper solution soon.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jun 23 2002 - 22:00:15 EST