Re: [PROBLEM] sundance on d-link dfe-580tx

From: Donald Becker (becker@scyld.com)
Date: Thu Jun 13 2002 - 11:12:37 EST


On 13 Jun 2002, Matthew Hall wrote:

> Subject: Re: [PROBLEM] sundance on d-link dfe-580tx
>
> I have tried and tested the sundance.c file as you indicated, and the
> netdrivers packages with a recompiled kernel, yet we still cannot get
> this (damn) card working :)

You are still running the old driver, not the driver at
   http://www.scyld.com/network/ethercard.html
      ftp://www.scyld.com/pub/network/sundance.c

> Just in case you can provide any more insight into this I compiled the
> alta-diag tool, for debugging purposes, the results of -aa, -ee and -mm
> are attached, aswell as the full detection message from dmesg after
> modprob'ing the module.

I never released a "1.01b" driver in January 2002. The 1.01a driver was
released about two years ago. The current version is
sundance.c:v1.06 1/28/2002

The diagnostic program is reading the correct station address, however
the driver you are using is reading a bogus address. I believe that
that my driver release should correctly work with this card.

-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Jun 15 2002 - 22:00:28 EST