On Tue, 2002-05-28 at 21:18, sean darcy wrote:
> You don't say which kernel you're using. I have a p71 which I can't get
> to work with 2.5.18 - see the mass storage thread. OTOH, a stock rh
> 2.4.18 kernel works just fine.
>
> What does usbview show? What are the usb and scsi snips from .config.
> What hapens when you try to mount sd* ?
Yes, I forgoht to mention that im running 2.4.18.
Here is a lsmod of all the relevent stuff I have loaded
root@neptune:~# lsmod
Module Size Used by Tainted: P
usb-storage 20820 0 (unused)
sr_mod 11792 0 (autoclean) (unused)
scsi_mod 80648 1 (autoclean) [usb-storage sr_mod]
usbview doesnt show mutch more than /proc/bus/usb/devices. The cammera
does show up in red in the left pane though. And I dont have any
/dev/sd* devices. Are you useing the camera in "Normal" usb mode?
somewhere in the setup they have an alternate mode, but dont know what
the difference is.
Here's the usb & scsi sections from my .config:
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
CONFIG_USB_UHCI_ALT=y
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_HID=y
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
# SCSI support
#
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
-- ----- GPG Key 0x7E959232; wwwkeys.pgp.net 861C AE70 158F C440 EEE1 397C 7CBD 1148 7E95 9232
This archive was generated by hypermail 2b29 : Fri May 31 2002 - 22:00:26 EST