Tue May 7 02:37:49 CEST 2002 ide-clean-57
Nuke /proc/ide. For explanations why, please see the frustrated comments in the
previous change log. If one still don't see why it wasn't a good thing,
well please just take a look at the following:
Kernel size before:
/usr/src/linux# size vmlinux
text data bss dec hex filename
1716049 403968 470252 2590269 27863d vmlinux
/usr/src/linux#
Kernel size after:
/usr/src/linux# size vmlinux
text data bss dec hex filename
1680993 403488 470124 2554605 26faed vmlinux
/usr/src/linux#
2% of overall size! And this is not exactly an minimalistic setup.
Wow! What a waste of space!!!! Not even counting the runtime size
of this crap! And then let's take a look at the following self
flattery:
-/*
- * Copyright (C) 1997-1998 Mark Lord
- *
- * This is the /proc/ide/ filesystem implementation.
- *
- * The major reason this exists is to provide sufficient access
- * to driver and config data, such that user-mode programs can
- * be developed to handle chipset tuning for most PCI interfaces.
- * This should provide better utilities, and less kernel bloat.
^^^^^^^^^^^^^^^^^^
Well there could only be an answer to this which would be
universally understandable in every Slavic language... but since
it's mothers day...
EOD.
diff -urN linux-2.5.14/drivers/ide/aec62xx.c linux/drivers/ide/aec62xx.c
--- linux-2.5.14/drivers/ide/aec62xx.c 2002-05-06 05:37:59.000000000 +0200
+++ linux/drivers/ide/aec62xx.c 2002-05-07 03:21:35.000000000 +0200
@@ -26,7 +26,7 @@
#include "ata-timing.h"
-#define DISPLAY_AEC62XX_TIMINGS
+#undef DISPLAY_AEC62XX_TIMINGS
#ifndef HIGH_4
#define HIGH_4(H) ((H)=(H>>4))
@@ -503,7 +503,7 @@
bmide_dev = dev;
aec62xx_display_info = &aec62xx_get_info;
}
-#endif /* DISPLAY_AEC62XX_TIMINGS && CONFIG_PROC_FS */
+#endif
return dev->irq;
}
diff -urN linux-2.5.14/drivers/ide/alim15x3.c linux/drivers/ide/alim15x3.c
--- linux-2.5.14/drivers/ide/alim15x3.c 2002-05-06 05:38:04.000000000 +0200
+++ linux/drivers/ide/alim15x3.c 2002-05-07 03:22:24.000000000 +0200
@@ -28,7 +28,7 @@
#include "ata-timing.h"
-#define DISPLAY_ALI_TIMINGS
+#undef DISPLAY_ALI_TIMINGS
#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
diff -urN linux-2.5.14/drivers/ide/amd74xx.c linux/drivers/ide/amd74xx.c
--- linux-2.5.14/drivers/ide/amd74xx.c 2002-05-06 05:38:03.000000000 +0200
+++ linux/drivers/ide/amd74xx.c 2002-05-07 03:23:35.000000000 +0200
@@ -94,7 +94,7 @@
* AMD /proc entry.
*/
-#ifdef CONFIG_PROC_FS
+#if 0 && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
@@ -384,7 +384,7 @@
* Register /proc/ide/amd74xx entry
*/
-#ifdef CONFIG_PROC_FS
+#if 0 && defined(CONFIG_PROC_FS)
if (!amd74xx_proc) {
amd_base = pci_resource_start(dev, 4);
bmide_dev = dev;
diff -urN linux-2.5.14/drivers/ide/cmd64x.c linux/drivers/ide/cmd64x.c
--- linux-2.5.14/drivers/ide/cmd64x.c 2002-05-06 05:38:00.000000000 +0200
+++ linux/drivers/ide/cmd64x.c 2002-05-07 03:24:08.000000000 +0200
@@ -79,7 +79,7 @@
#define UDIDETCR1 0x7B
#define DTPR1 0x7C
-#define DISPLAY_CMD64X_TIMINGS
+#undef DISPLAY_CMD64X_TIMINGS
#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
diff -urN linux-2.5.14/drivers/ide/cs5530.c linux/drivers/ide/cs5530.c
--- linux-2.5.14/drivers/ide/cs5530.c 2002-05-06 05:38:04.000000000 +0200
+++ linux/drivers/ide/cs5530.c 2002-05-07 03:24:29.000000000 +0200
@@ -29,7 +29,7 @@
#include "ata-timing.h"
-#define DISPLAY_CS5530_TIMINGS
+#undef DISPLAY_CS5530_TIMINGS
#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
diff -urN linux-2.5.14/drivers/ide/hpt366.c linux/drivers/ide/hpt366.c
--- linux-2.5.14/drivers/ide/hpt366.c 2002-05-07 02:36:37.000000000 +0200
+++ linux/drivers/ide/hpt366.c 2002-05-07 03:25:23.000000000 +0200
@@ -65,7 +65,7 @@
#include "ata-timing.h"
-#define DISPLAY_HPT366_TIMINGS
+#undef DISPLAY_HPT366_TIMINGS
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
diff -urN linux-2.5.14/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.14/drivers/ide/ide.c 2002-05-07 03:47:14.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-05-07 03:17:41.000000000 +0200
@@ -1921,12 +1921,6 @@
return 0;
}
-#ifdef CONFIG_PROC_FS
-ide_proc_entry_t generic_subdriver_entries[] = {
- { NULL, 0, NULL, NULL }
-};
-#endif
-
void ide_unregister(struct ata_channel *ch)
{
struct gendisk *gd;
@@ -1983,9 +1977,6 @@
}
}
}
-#ifdef CONFIG_PROC_FS
- destroy_proc_ide_drives(ch);
-#endif
spin_lock_irqsave(&ide_lock, flags);
/*
@@ -2208,9 +2199,6 @@
if (!initializing) {
ideprobe_init();
revalidate_drives();
-#ifdef CONFIG_PROC_FS
- create_proc_ide_interfaces();
-#endif
/* FIXME: Do we really have to call it second time here?! */
ide_driver_module();
}
@@ -3198,11 +3186,7 @@
}
drive->revalidate = 1;
drive->suspend_reset = 0;
-#ifdef CONFIG_PROC_FS
- ide_add_proc_entries(drive->proc, generic_subdriver_entries, drive);
- if (ata_ops(drive))
- ide_add_proc_entries(drive->proc, ata_ops(drive)->proc, drive);
-#endif
+
return 0;
}
@@ -3233,11 +3217,6 @@
#if defined(CONFIG_BLK_DEV_ISAPNP) && defined(CONFIG_ISAPNP) && defined(MODULE)
pnpide_init(0);
#endif
-#ifdef CONFIG_PROC_FS
- if (ata_ops(drive))
- ide_remove_proc_entries(drive->proc, ata_ops(drive)->proc);
- ide_remove_proc_entries(drive->proc, generic_subdriver_entries);
-#endif
auto_remove_settings(drive);
drive->driver = NULL;
drive->present = 0;
@@ -3315,10 +3294,6 @@
EXPORT_SYMBOL(ide_cmd);
EXPORT_SYMBOL(ide_delay_50ms);
EXPORT_SYMBOL(ide_stall_queue);
-#ifdef CONFIG_PROC_FS
-EXPORT_SYMBOL(ide_add_proc_entries);
-EXPORT_SYMBOL(ide_remove_proc_entries);
-#endif
EXPORT_SYMBOL(ide_add_setting);
EXPORT_SYMBOL(ide_remove_setting);
@@ -3484,10 +3459,6 @@
# endif
#endif
-#ifdef CONFIG_PROC_FS
- proc_ide_create();
-#endif
-
/*
* Initialize all device type driver modules.
*/
@@ -3553,9 +3524,6 @@
ide_unregister(&ide_hwifs[h]);
}
-# ifdef CONFIG_PROC_FS
- proc_ide_destroy();
-# endif
devfs_unregister(ide_devfs_handle);
}
diff -urN linux-2.5.14/drivers/ide/ide-cd.c linux/drivers/ide/ide-cd.c
--- linux-2.5.14/drivers/ide/ide-cd.c 2002-05-06 05:38:01.000000000 +0200
+++ linux/drivers/ide/ide-cd.c 2002-05-07 03:34:22.000000000 +0200
@@ -2906,7 +2906,6 @@
check_media_change: ide_cdrom_check_media_change,
revalidate: ide_cdrom_revalidate,
capacity: ide_cdrom_capacity,
- proc: NULL
};
/* options */
diff -urN linux-2.5.14/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.14/drivers/ide/ide-disk.c 2002-05-07 03:47:14.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-05-07 03:17:38.000000000 +0200
@@ -419,68 +419,6 @@
return drive->capacity - drive->sect0;
}
-#ifdef CONFIG_PROC_FS
-
-#ifdef CONFIG_BLK_DEV_IDE_TCQ
-static int proc_idedisk_read_tcq
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- struct ata_device *drive = (struct ata_device *) data;
- char *out = page;
- int len, cmds, i;
- unsigned long flags;
-
- if (!blk_queue_tagged(&drive->queue)) {
- len = sprintf(out, "not configured\n");
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
- }
-
- spin_lock_irqsave(&ide_lock, flags);
-
- len = sprintf(out, "TCQ currently on:\t%s\n", drive->using_tcq ? "yes" : "no");
- len += sprintf(out+len, "Max queue depth:\t%d\n",drive->queue_depth);
- len += sprintf(out+len, "Max achieved depth:\t%d\n",drive->max_depth);
- len += sprintf(out+len, "Max depth since last:\t%d\n",drive->max_last_depth);
- len += sprintf(out+len, "Current depth:\t\t%d\n", ata_pending_commands(drive));
- len += sprintf(out+len, "Active tags:\t\t[ ");
- for (i = 0, cmds = 0; i < drive->queue_depth; i++) {
- struct request *rq = blk_queue_tag_request(&drive->queue, i);
-
- if (!rq)
- continue;
-
- len += sprintf(out+len, "%d, ", i);
- cmds++;
- }
- len += sprintf(out+len, "]\n");
-
- len += sprintf(out+len, "Queue:\t\t\treleased [ %lu ] - started [ %lu ]\n", drive->immed_rel, drive->immed_comp);
-
- if (ata_pending_commands(drive) != cmds)
- len += sprintf(out+len, "pending request and queue count mismatch (counted: %d)\n", cmds);
-
- len += sprintf(out+len, "DMA status:\t\t%srunning\n", test_bit(IDE_DMA, &HWGROUP(drive)->flags) ? "" : "not ");
-
- drive->max_last_depth = 0;
-
- spin_unlock_irqrestore(&ide_lock, flags);
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-#endif
-
-static ide_proc_entry_t idedisk_proc[] = {
-#ifdef CONFIG_BLK_DEV_IDE_TCQ
- { "tcq", S_IFREG|S_IRUSR, proc_idedisk_read_tcq, NULL },
-#endif
- { NULL, 0, NULL, NULL }
-};
-
-#else
-
-# define idedisk_proc NULL
-
-#endif
-
/*
* This is tightly woven into the driver->special can not touch.
* DON'T do it again until a total personality rewrite is committed.
@@ -1099,7 +1037,6 @@
check_media_change: idedisk_check_media_change,
revalidate: NULL, /* use default method */
capacity: idedisk_capacity,
- proc: idedisk_proc
};
MODULE_DESCRIPTION("ATA DISK Driver");
@@ -1116,10 +1053,6 @@
}
/* We must remove proc entries defined in this module.
Otherwise we oops while accessing these entries */
-#ifdef CONFIG_PROC_FS
- if (drive->proc)
- ide_remove_proc_entries(drive->proc, idedisk_proc);
-#endif
}
}
diff -urN linux-2.5.14/drivers/ide/ide-proc.c linux/drivers/ide/ide-proc.c
--- linux-2.5.14/drivers/ide/ide-proc.c 2002-05-07 02:36:37.000000000 +0200
+++ linux/drivers/ide/ide-proc.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,477 +0,0 @@
-/*
- * Copyright (C) 1997-1998 Mark Lord
- *
- * This is the /proc/ide/ filesystem implementation.
- *
- * The major reason this exists is to provide sufficient access
- * to driver and config data, such that user-mode programs can
- * be developed to handle chipset tuning for most PCI interfaces.
- * This should provide better utilities, and less kernel bloat.
- *
- * The entire pci config space for a PCI interface chipset can be
- * retrieved by just reading it. e.g. "cat /proc/ide3/config"
- *
- * To modify registers *safely*, do something like:
- * echo "P40:88" >/proc/ide/ide3/config
- * That expression writes 0x88 to pci config register 0x40
- * on the chip which controls ide3. Multiple tuples can be issued,
- * and the writes will be completed as an atomic set:
- * echo "P40:88 P41:35 P42:00 P43:00" >/proc/ide/ide3/config
- *
- * All numbers must be specified using pairs of ascii hex digits.
- * It is important to note that these writes will be performed
- * after waiting for the IDE controller (both interfaces)
- * to be completely idle, to ensure no corruption of I/O in progress.
- *
- * Non-PCI registers can also be written, using "R" in place of "P"
- * in the above examples. The size of the port transfer is determined
- * by the number of pairs of hex digits given for the data. If a two
- * digit value is given, the write will be a byte operation; if four
- * digits are used, the write will be performed as a 16-bit operation;
- * and if eight digits are specified, a 32-bit "dword" write will be
- * performed. Odd numbers of digits are not permitted.
- *
- * If there is an error *anywhere* in the string of registers/data
- * then *none* of the writes will be performed.
- *
- * Drive/Driver settings can be retrieved by reading the drive's
- * "settings" files. e.g. "cat /proc/ide0/hda/settings"
- * To write a new value "val" into a specific setting "name", use:
- * echo "name:val" >/proc/ide/ide0/hda/settings
- */
-
-#include <linux/config.h>
-#include <asm/uaccess.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/ctype.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#ifndef MIN
-#define MIN(a,b) (((a) < (b)) ? (a) : (b))
-#endif
-
-#ifdef CONFIG_BLK_DEV_AEC62XX
-extern byte aec62xx_proc;
-int (*aec62xx_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_AEC62XX */
-#ifdef CONFIG_BLK_DEV_ALI15X3
-extern byte ali_proc;
-int (*ali_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_ALI15X3 */
-#ifdef CONFIG_BLK_DEV_AMD74XX
-extern byte amd74xx_proc;
-int (*amd74xx_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_AMD74XX */
-#ifdef CONFIG_BLK_DEV_CMD64X
-extern byte cmd64x_proc;
-int (*cmd64x_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_CMD64X */
-#ifdef CONFIG_BLK_DEV_CS5530
-extern byte cs5530_proc;
-int (*cs5530_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_CS5530 */
-#ifdef CONFIG_BLK_DEV_HPT34X
-extern byte hpt34x_proc;
-int (*hpt34x_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_HPT34X */
-#ifdef CONFIG_BLK_DEV_HPT366
-extern byte hpt366_proc;
-int (*hpt366_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_HPT366 */
-#ifdef CONFIG_BLK_DEV_PDC202XX
-extern byte pdc202xx_proc;
-int (*pdc202xx_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_PDC202XX */
-#ifdef CONFIG_BLK_DEV_PIIX
-extern byte piix_proc;
-int (*piix_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_PIIX */
-#ifdef CONFIG_BLK_DEV_SVWKS
-extern byte svwks_proc;
-int (*svwks_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_SVWKS */
-#ifdef CONFIG_BLK_DEV_SIS5513
-extern byte sis_proc;
-int (*sis_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_SIS5513 */
-#ifdef CONFIG_BLK_DEV_VIA82CXXX
-extern byte via_proc;
-int (*via_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_VIA82CXXX */
-
-static struct proc_dir_entry * proc_ide_root = NULL;
-
-static int ide_getdigit(char c)
-{
- int digit;
- if (isdigit(c))
- digit = c - '0';
- else
- digit = -1;
- return digit;
-}
-
-static int proc_ide_read_settings
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t *drive = data;
- ide_settings_t *setting = drive->settings;
- char *out = page;
- int len, rc, mul_factor, div_factor;
-
- out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n");
- out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n");
- while(setting) {
- mul_factor = setting->mul_factor;
- div_factor = setting->div_factor;
- out += sprintf(out, "%-24s", setting->name);
- if ((rc = ide_read_setting(drive, setting)) >= 0)
- out += sprintf(out, "%-16d", rc * mul_factor / div_factor);
- else
- out += sprintf(out, "%-16s", "write-only");
- out += sprintf(out, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor);
- if (setting->rw & SETTING_READ)
- out += sprintf(out, "r");
- if (setting->rw & SETTING_WRITE)
- out += sprintf(out, "w");
- out += sprintf(out, "\n");
- setting = setting->next;
- }
- len = out - page;
- PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
-}
-
-#define MAX_LEN 30
-
-static int proc_ide_write_settings
- (struct file *file, const char *buffer, unsigned long count, void *data)
-{
- ide_drive_t *drive = data;
- char name[MAX_LEN + 1];
- int for_real = 0, len;
- unsigned long n;
- const char *start = NULL;
- ide_settings_t *setting;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- /*
- * Skip over leading whitespace
- */
- while (count && isspace(*buffer)) {
- --count;
- ++buffer;
- }
- /*
- * Do one full pass to verify all parameters,
- * then do another to actually write the new settings.
- */
- do {
- const char *p;
- p = buffer;
- n = count;
- while (n > 0) {
- int d, digits;
- unsigned int val = 0;
- start = p;
-
- while (n > 0 && *p != ':') {
- --n;
- p++;
- }
- if (*p != ':')
- goto parse_error;
- len = min(p - start, MAX_LEN);
- strncpy(name, start, min(len, MAX_LEN));
- name[len] = 0;
-
- if (n > 0) {
- --n;
- p++;
- } else
- goto parse_error;
-
- digits = 0;
- while (n > 0 && (d = ide_getdigit(*p)) >= 0) {
- val = (val * 10) + d;
- --n;
- ++p;
- ++digits;
- }
- if (n > 0 && !isspace(*p))
- goto parse_error;
- while (n > 0 && isspace(*p)) {
- --n;
- ++p;
- }
-
- /* Find setting by name */
- setting = drive->settings;
-
- while (setting) {
- if (strcmp(setting->name, name) == 0)
- break;
- setting = setting->next;
- }
- if (!setting)
- goto parse_error;
-
- if (for_real)
- ide_write_setting(drive, setting, val * setting->div_factor / setting->mul_factor);
- }
- } while (!for_real++);
- return count;
-parse_error:
- printk("proc_ide_write_settings(): parse error\n");
- return -EINVAL;
-}
-
-static ide_proc_entry_t generic_drive_entries[] = {
- { "settings", S_IFREG|S_IRUSR|S_IWUSR,proc_ide_read_settings, proc_ide_write_settings },
- { NULL, 0, NULL, NULL }
-};
-
-void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data)
-{
- struct proc_dir_entry *ent;
-
- if (!dir || !p)
- return;
- while (p->name != NULL) {
- ent = create_proc_entry(p->name, p->mode, dir);
- if (!ent) return;
- ent->nlink = 1;
- ent->data = data;
- ent->read_proc = p->read_proc;
- ent->write_proc = p->write_proc;
- p++;
- }
-}
-
-void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
-{
- if (!dir || !p)
- return;
- while (p->name != NULL) {
- remove_proc_entry(p->name, dir);
- p++;
- }
-}
-
-/* FIXME: we should iterate over the hwifs here as everywhere else.
- */
-static void create_proc_ide_drives(struct ata_channel *hwif)
-{
- int d;
- struct proc_dir_entry *parent = hwif->proc;
- char name[64];
-
- for (d = 0; d < MAX_DRIVES; d++) {
- ide_drive_t *drive = &hwif->drives[d];
- struct ata_operations *driver = drive->driver;
-
- if (!drive->present)
- continue;
- if (drive->proc)
- continue;
-
- drive->proc = proc_mkdir(drive->name, parent);
- if (drive->proc) {
- ide_add_proc_entries(drive->proc, generic_drive_entries, drive);
- if (driver) {
- ide_add_proc_entries(drive->proc, generic_subdriver_entries, drive);
- ide_add_proc_entries(drive->proc, driver->proc, drive);
- }
- }
- sprintf(name,"ide%d/%s", (drive->name[2]-'a')/2, drive->name);
- }
-}
-
-static void destroy_proc_ide_device(struct ata_channel *hwif, ide_drive_t *drive)
-{
- struct ata_operations *driver = drive->driver;
-
- if (drive->proc) {
- if (driver)
- ide_remove_proc_entries(drive->proc, driver->proc);
- ide_remove_proc_entries(drive->proc, generic_drive_entries);
- remove_proc_entry(drive->name, proc_ide_root);
- remove_proc_entry(drive->name, hwif->proc);
- drive->proc = NULL;
- }
-}
-
-void destroy_proc_ide_drives(struct ata_channel *hwif)
-{
- int d;
-
- for (d = 0; d < MAX_DRIVES; d++) {
- ide_drive_t *drive = &hwif->drives[d];
-
- if (drive->proc)
- destroy_proc_ide_device(hwif, drive);
- }
-}
-
-void create_proc_ide_interfaces(void)
-{
- int h;
-
- for (h = 0; h < MAX_HWIFS; h++) {
- struct ata_channel *hwif = &ide_hwifs[h];
-
- if (!hwif->present)
- continue;
- if (!hwif->proc) {
- hwif->proc = proc_mkdir(hwif->name, proc_ide_root);
- if (!hwif->proc)
- return;
- }
- create_proc_ide_drives(hwif);
- }
-}
-
-static void destroy_proc_ide_interfaces(void)
-{
- int h;
-
- for (h = 0; h < MAX_HWIFS; h++) {
- struct ata_channel *hwif = &ide_hwifs[h];
- int exist = (hwif->proc != NULL);
-#if 0
- if (!hwif->present)
- continue;
-#endif
- if (exist) {
- destroy_proc_ide_drives(hwif);
- remove_proc_entry(hwif->name, proc_ide_root);
- hwif->proc = NULL;
- } else
- continue;
- }
-}
-
-void proc_ide_create(void)
-{
- proc_ide_root = proc_mkdir("ide", 0);
- if (!proc_ide_root) return;
-
- create_proc_ide_interfaces();
-
-#ifdef CONFIG_BLK_DEV_AEC62XX
- if ((aec62xx_display_info) && (aec62xx_proc))
- create_proc_info_entry("aec62xx", 0, proc_ide_root, aec62xx_display_info);
-#endif /* CONFIG_BLK_DEV_AEC62XX */
-#ifdef CONFIG_BLK_DEV_ALI15X3
- if ((ali_display_info) && (ali_proc))
- create_proc_info_entry("ali", 0, proc_ide_root, ali_display_info);
-#endif /* CONFIG_BLK_DEV_ALI15X3 */
-#ifdef CONFIG_BLK_DEV_AMD74XX
- if ((amd74xx_display_info) && (amd74xx_proc))
- create_proc_info_entry("amd74xx", 0, proc_ide_root, amd74xx_display_info);
-#endif /* CONFIG_BLK_DEV_AMD74XX */
-#ifdef CONFIG_BLK_DEV_CMD64X
- if ((cmd64x_display_info) && (cmd64x_proc))
- create_proc_info_entry("cmd64x", 0, proc_ide_root, cmd64x_display_info);
-#endif /* CONFIG_BLK_DEV_CMD64X */
-#ifdef CONFIG_BLK_DEV_CS5530
- if ((cs5530_display_info) && (cs5530_proc))
- create_proc_info_entry("cs5530", 0, proc_ide_root, cs5530_display_info);
-#endif /* CONFIG_BLK_DEV_CS5530 */
-#ifdef CONFIG_BLK_DEV_HPT34X
- if ((hpt34x_display_info) && (hpt34x_proc))
- create_proc_info_entry("hpt34x", 0, proc_ide_root, hpt34x_display_info);
-#endif /* CONFIG_BLK_DEV_HPT34X */
-#ifdef CONFIG_BLK_DEV_HPT366
- if ((hpt366_display_info) && (hpt366_proc))
- create_proc_info_entry("hpt366", 0, proc_ide_root, hpt366_display_info);
-#endif /* CONFIG_BLK_DEV_HPT366 */
-#ifdef CONFIG_BLK_DEV_SVWKS
- if ((svwks_display_info) && (svwks_proc))
- create_proc_info_entry("svwks", 0, proc_ide_root, svwks_display_info);
-#endif /* CONFIG_BLK_DEV_SVWKS */
-#ifdef CONFIG_BLK_DEV_PDC202XX
- if ((pdc202xx_display_info) && (pdc202xx_proc))
- create_proc_info_entry("pdc202xx", 0, proc_ide_root, pdc202xx_display_info);
-#endif /* CONFIG_BLK_DEV_PDC202XX */
-#ifdef CONFIG_BLK_DEV_PIIX
- if ((piix_display_info) && (piix_proc))
- create_proc_info_entry("piix", 0, proc_ide_root, piix_display_info);
-#endif /* CONFIG_BLK_DEV_PIIX */
-#ifdef CONFIG_BLK_DEV_SIS5513
- if ((sis_display_info) && (sis_proc))
- create_proc_info_entry("sis", 0, proc_ide_root, sis_display_info);
-#endif /* CONFIG_BLK_DEV_SIS5513 */
-#ifdef CONFIG_BLK_DEV_VIA82CXXX
- if ((via_display_info) && (via_proc))
- create_proc_info_entry("via", 0, proc_ide_root, via_display_info);
-#endif /* CONFIG_BLK_DEV_VIA82CXXX */
-}
-
-void proc_ide_destroy(void)
-{
- /*
- * Mmmm.. does this free up all resources,
- * or do we need to do a more proper cleanup here ??
- */
-#ifdef CONFIG_BLK_DEV_AEC62XX
- if ((aec62xx_display_info) && (aec62xx_proc))
- remove_proc_entry("ide/aec62xx",0);
-#endif /* CONFIG_BLK_DEV_AEC62XX */
-#ifdef CONFIG_BLK_DEV_ALI15X3
- if ((ali_display_info) && (ali_proc))
- remove_proc_entry("ide/ali",0);
-#endif /* CONFIG_BLK_DEV_ALI15X3 */
-#ifdef CONFIG_BLK_DEV_AMD74XX
- if ((amd74xx_display_info) && (amd74xx_proc))
- remove_proc_entry("ide/amd74xx",0);
-#endif /* CONFIG_BLK_DEV_AMD74XX */
-#ifdef CONFIG_BLK_DEV_CMD64X
- if ((cmd64x_display_info) && (cmd64x_proc))
- remove_proc_entry("ide/cmd64x",0);
-#endif /* CONFIG_BLK_DEV_CMD64X */
-#ifdef CONFIG_BLK_DEV_CS5530
- if ((cs5530_display_info) && (cs5530_proc))
- remove_proc_entry("ide/cs5530",0);
-#endif /* CONFIG_BLK_DEV_CS5530 */
-#ifdef CONFIG_BLK_DEV_HPT34X
- if ((hpt34x_display_info) && (hpt34x_proc))
- remove_proc_entry("ide/hpt34x",0);
-#endif /* CONFIG_BLK_DEV_HPT34X */
-#ifdef CONFIG_BLK_DEV_HPT366
- if ((hpt366_display_info) && (hpt366_proc))
- remove_proc_entry("ide/hpt366",0);
-#endif /* CONFIG_BLK_DEV_HPT366 */
-#ifdef CONFIG_BLK_DEV_PDC202XX
- if ((pdc202xx_display_info) && (pdc202xx_proc))
- remove_proc_entry("ide/pdc202xx",0);
-#endif /* CONFIG_BLK_DEV_PDC202XX */
-#ifdef CONFIG_BLK_DEV_PIIX
- if ((piix_display_info) && (piix_proc))
- remove_proc_entry("ide/piix",0);
-#endif /* CONFIG_BLK_DEV_PIIX */
-#ifdef CONFIG_BLK_DEV_SVWKS
- if ((svwks_display_info) && (svwks_proc))
- remove_proc_entry("ide/svwks",0);
-#endif /* CONFIG_BLK_DEV_SVWKS */
-#ifdef CONFIG_BLK_DEV_SIS5513
- if ((sis_display_info) && (sis_proc))
- remove_proc_entry("ide/sis", 0);
-#endif /* CONFIG_BLK_DEV_SIS5513 */
-#ifdef CONFIG_BLK_DEV_VIA82CXXX
- if ((via_display_info) && (via_proc))
- remove_proc_entry("ide/via",0);
-#endif /* CONFIG_BLK_DEV_VIA82CXXX */
-
- remove_proc_entry("ide/drivers", 0);
- destroy_proc_ide_interfaces();
- remove_proc_entry("ide", 0);
-}
diff -urN linux-2.5.14/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.14/drivers/ide/ide-tape.c 2002-05-07 03:47:14.000000000 +0200
+++ linux/drivers/ide/ide-tape.c 2002-05-07 03:36:01.000000000 +0200
@@ -6108,31 +6108,6 @@
return 0;
}
-#ifdef CONFIG_PROC_FS
-
-static int proc_idetape_read_name
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t *drive = (ide_drive_t *) data;
- idetape_tape_t *tape = drive->driver_data;
- char *out = page;
- int len;
-
- len = sprintf(out, "%s\n", tape->name);
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static ide_proc_entry_t idetape_proc[] = {
- { "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
- { NULL, 0, NULL, NULL }
-};
-
-#else
-
-#define idetape_proc NULL
-
-#endif
-
static void idetape_revalidate(ide_drive_t *_dummy)
{
/* We don't have to handle any partition information here, which is the
@@ -6154,7 +6129,6 @@
release: idetape_blkdev_release,
check_media_change: NULL,
revalidate: idetape_revalidate,
- proc: idetape_proc
};
/*
diff -urN linux-2.5.14/drivers/ide/Makefile linux/drivers/ide/Makefile
--- linux-2.5.14/drivers/ide/Makefile 2002-05-07 02:36:37.000000000 +0200
+++ linux/drivers/ide/Makefile 2002-05-07 03:31:30.000000000 +0200
@@ -72,8 +72,6 @@
obj-$(CONFIG_BLK_DEV_ATARAID_PDC) += pdcraid.o
obj-$(CONFIG_BLK_DEV_ATARAID_HPT) += hptraid.o
-ide-obj-$(CONFIG_PROC_FS) += ide-proc.o
-
ide-mod-objs := ide-taskfile.o ide.o ide-probe.o ide-geometry.o ide-features.o ata-timing.o $(ide-obj-y)
include $(TOPDIR)/Rules.make
diff -urN linux-2.5.14/drivers/ide/pdc202xx.c linux/drivers/ide/pdc202xx.c
--- linux-2.5.14/drivers/ide/pdc202xx.c 2002-05-06 05:38:06.000000000 +0200
+++ linux/drivers/ide/pdc202xx.c 2002-05-07 03:25:51.000000000 +0200
@@ -51,7 +51,7 @@
#define PDC202XX_DEBUG_DRIVE_INFO 0
#define PDC202XX_DECODE_REGISTER_INFO 0
-#define DISPLAY_PDC202XX_TIMINGS
+#undef DISPLAY_PDC202XX_TIMINGS
#ifndef SPLIT_BYTE
#define SPLIT_BYTE(B,H,L) ((H)=(B>>4), (L)=(B-((B>>4)<<4)))
diff -urN linux-2.5.14/drivers/ide/piix.c linux/drivers/ide/piix.c
--- linux-2.5.14/drivers/ide/piix.c 2002-05-06 05:38:00.000000000 +0200
+++ linux/drivers/ide/piix.c 2002-05-07 03:26:49.000000000 +0200
@@ -110,7 +110,7 @@
* PIIX/ICH /proc entry.
*/
-#ifdef CONFIG_PROC_FS
+#if 0 && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
@@ -520,7 +520,7 @@
* Register /proc/ide/piix entry
*/
-#ifdef CONFIG_PROC_FS
+#if 0 && defined(CONFIG_PROC_FS)
if (!piix_proc) {
piix_base = pci_resource_start(dev, 4);
bmide_dev = dev;
diff -urN linux-2.5.14/drivers/ide/serverworks.c linux/drivers/ide/serverworks.c
--- linux-2.5.14/drivers/ide/serverworks.c 2002-05-06 05:38:03.000000000 +0200
+++ linux/drivers/ide/serverworks.c 2002-05-07 03:29:32.000000000 +0200
@@ -93,15 +93,16 @@
#include "ata-timing.h"
-#define DISPLAY_SVWKS_TIMINGS 1
+#undef DISPLAY_SVWKS_TIMINGS
#undef SVWKS_DEBUG_DRIVE_INFO
+static u8 svwks_revision = 0;
+
#if defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static struct pci_dev *bmide_dev;
-static byte svwks_revision = 0;
static int svwks_get_info(char *, char **, off_t, int);
extern int (*svwks_display_info)(char *, char **, off_t, int); /* ide-proc.c */
diff -urN linux-2.5.14/drivers/ide/sis5513.c linux/drivers/ide/sis5513.c
--- linux-2.5.14/drivers/ide/sis5513.c 2002-05-06 05:38:00.000000000 +0200
+++ linux/drivers/ide/sis5513.c 2002-05-07 03:27:49.000000000 +0200
@@ -58,7 +58,7 @@
/* When BROKEN_LEVEL is defined it limits the DMA mode
at boot time to its value */
// #define BROKEN_LEVEL XFER_SW_DMA_0
-#define DISPLAY_SIS_TIMINGS
+#undef DISPLAY_SIS_TIMINGS
/* Miscellaneaous flags */
#define SIS5513_LATENCY 0x01
diff -urN linux-2.5.14/drivers/ide/via82cxxx.c linux/drivers/ide/via82cxxx.c
--- linux-2.5.14/drivers/ide/via82cxxx.c 2002-05-06 05:37:58.000000000 +0200
+++ linux/drivers/ide/via82cxxx.c 2002-05-07 03:28:40.000000000 +0200
@@ -136,7 +136,7 @@
* VIA /proc entry.
*/
-#ifdef CONFIG_PROC_FS
+#if 0 && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
@@ -497,7 +497,7 @@
* Setup /proc/ide/via entry.
*/
-#ifdef CONFIG_PROC_FS
+#if 0 && defined(CONFIG_PROC_FS)
if (!via_proc) {
via_base = pci_resource_start(dev, 4);
bmide_dev = dev;
diff -urN linux-2.5.14/drivers/scsi/ide-scsi.c linux/drivers/scsi/ide-scsi.c
--- linux-2.5.14/drivers/scsi/ide-scsi.c 2002-05-06 05:37:53.000000000 +0200
+++ linux/drivers/scsi/ide-scsi.c 2002-05-07 03:37:28.000000000 +0200
@@ -557,7 +557,6 @@
check_media_change: NULL,
revalidate: idescsi_revalidate,
capacity: NULL,
- proc: NULL
};
/*
diff -urN linux-2.5.14/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.14/include/linux/ide.h 2002-05-07 03:47:14.000000000 +0200
+++ linux/include/linux/ide.h 2002-05-07 03:17:40.000000000 +0200
@@ -379,8 +379,7 @@
void *driver_data; /* extra driver data */
devfs_handle_t de; /* directory for device */
- struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
- struct ide_settings_s *settings; /* /proc/ide/ drive settings */
+ struct ide_settings_s *settings; /* ioctl entires */
char driver_req[10]; /* requests specific driver */
int last_lun; /* last logical unit */
@@ -612,43 +611,7 @@
extern int ide_write_setting(struct ata_device *, ide_settings_t *, int);
extern void ide_add_generic_settings(struct ata_device *);
-/*
- * /proc/ide interface
- */
-typedef struct {
- const char *name;
- mode_t mode;
- read_proc_t *read_proc;
- write_proc_t *write_proc;
-} ide_proc_entry_t;
-
-#ifdef CONFIG_PROC_FS
-void proc_ide_create(void);
-void proc_ide_destroy(void);
-void destroy_proc_ide_drives(struct ata_channel *);
-void create_proc_ide_interfaces(void);
-void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data);
-void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p);
-read_proc_t proc_ide_read_geometry;
-
-/*
- * Standard exit stuff:
- */
-#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
-{ \
- len -= off; \
- if (len < count) { \
- *eof = 1; \
- if (len <= 0) \
- return 0; \
- } else \
- len = count; \
- *start = page + off; \
- return len; \
-}
-#else
-# define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
-#endif
+#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
/*
* This structure describes the operations possible on a particular device type
@@ -671,8 +634,6 @@
void (*revalidate)(struct ata_device *);
sector_t (*capacity)(struct ata_device *);
-
- ide_proc_entry_t *proc;
};
/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
@@ -863,7 +824,6 @@
void ide_init_subdrivers (void);
extern struct block_device_operations ide_fops[];
-extern ide_proc_entry_t generic_subdriver_entries[];
#ifdef CONFIG_BLK_DEV_IDE
/* Probe for devices attached to the systems host controllers.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 07 2002 - 22:00:29 EST