ide-convert-9 oops on boot

From: J.A. Magallon (jamagallon@able.es)
Date: Fri May 03 2002 - 21:24:33 EST

Next message: Holzrichter, Bruce: "RE: my slab cache broken on sparc64"
Previous message: David S. Miller: "Re: undefined reference to `in_ntoa'"
Next in thread: Heinz Diehl: "Re: ide-convert-9 oops on boot"
Reply: Heinz Diehl: "Re: ide-convert-9 oops on boot"
Reply: J.A. Magallon: "ide-convert-[89] oops (decoded) on boot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi.

Just patched pre8 with ide-convert-9, and system hangs on boot:

PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Conner Peripherals 1080MB - CFS1081A, ATA DISK drive
hdb: CREATIVE CD5230E, ATAPI CD/DVD-ROM drive
hdc: YAMAHA CRW8424E, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

<=======0 OOPS here, just got hung...
<usual output follows >
hda: 2114180 sectors (1082 MB), CHS=524/64/63, DMA
ide-cd: passing drive hdb to ide-scsi emulation.
ide-cd: passing drive hdc to ide-scsi emulation.
ide-floppy driver 0.99.newide

If it is not a known problem, and anyone needs more info I can write
down the hex and decode it.

TIA

werewolf:/proc/ide# lspci
00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge
00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:0e.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01)
00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 06)
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX] (rev b2)

werewolf:/proc/ide# cat piix

Intel PIIX4 Ultra 33 Chipset.
--------------- Primary Channel ---------------- Secondary Channel -------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: yes yes yes no
UDMA enabled: no no no no
UDMA enabled: X X X X
UDMA
DMA
PIO

-- 
J.A. Magallon                           #  Let the source be with you...        
mailto:jamagallon@able.es
Mandrake Linux release 8.3 (Cooker) for i586
Linux werewolf 2.4.19-pre7-jam9 #2 SMP mié may 1 12:09:38 CEST 2002 i686
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: Holzrichter, Bruce: "RE: my slab cache broken on sparc64"
Previous message: David S. Miller: "Re: undefined reference to `in_ntoa'"
Next in thread: Heinz Diehl: "Re: ide-convert-9 oops on boot"
Reply: Heinz Diehl: "Re: ide-convert-9 oops on boot"
Reply: J.A. Magallon: "ide-convert-[89] oops (decoded) on boot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Tue May 07 2002 - 22:00:22 EST