Linux version 2.4.17 (dwilson@lenny) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #2 Wed Mar 13 20:15:49 IST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS) BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) On node 0 totalpages: 130800 zone(0): 4096 pages. zone(1): 126704 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: mem=523200K Initializing CPU#0 Detected 601.378 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1199.30 BogoMIPS Memory: 512212k/523200k available (1471k kernel code, 10600k reserved, 438k data, 232k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000 CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 601.3833 MHz. ..... host bus clock speed is 100.2304 MHz. cpu: 0, clocks: 1002304, slice: 501152 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.09 Starting kswapd ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e i810_rng hardware driver 0.9.6 loaded block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 96147U8, ATA DISK drive hdc: ST38410A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 120060864 sectors (61471 MB) w/2048KiB Cache, CHS=7473/255/63 hdc: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=16708/16/63 Partition check: hda: hda1 hda2 hda3 hdc: [PTBL] [1048/255/63] hdc1 hdc2 < hdc5 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 438M agpgart: Detected an Intel i810 Chipset. agpgart: AGP aperture is 64M @ 0xd0000000 [drm] AGP 0.99 on Intel i810 @ 0xd0000000 64MB [drm] Initialized i810 1.1.0 20010616 on minor 0 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 11 for device 01:09.0 PCI: Sharing IRQ 11 with 00:1f.5 qlogicisp : new isp1020 revision ID (5) scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 48 irq 11 MEM base 0xe08a5000 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00 Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 04 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 LVM version 1.0.1-rc4(ish)(03/10/2001) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 232k freed Adding Swap: 265064k swap-space (priority -1) EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended reiserfs: checking transaction log (device 3a:00) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 3a:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 3a:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 3a:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 3a:04) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 3a:05) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 3a:06) ... Using r5 hash to sort names ReiserFS version 3.6.25 Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001) PCI: Found IRQ 5 for device 01:0b.0 PCI: Sharing IRQ 5 with 00:1f.2 tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: Index #1 - Media 10baseT (#0) described by a 21140 non-MII (0) block. tulip0: Index #2 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. tulip0: Index #3 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block. tulip0: Index #4 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block. tulip0: MII transceiver #1 config 3100 status 7809 advertising 01e1. eth0: Davicom DM9102/DM9102A rev 49 at 0xc400, 00:80:AD:83:DD:44, IRQ 5. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.15) apm: overridden by ACPI. PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 01:09.0 PCI: Setting latency timer of device 00:1f.5 to 64 mtrr: base(0xd0000000) is not aligned on a size(0x180000) boundary