On Wed, 27 Mar 2002, James Mayer wrote:
> On Thu, Mar 28, 2002 at 12:04:33AM +0000, Alan Cox wrote:
> > > After adding printk calls to alim15x3.c, it seems to hang during the
> > > pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02) call on line 588.
> >
> > Does it work if you comemtn that line out ?
>
> No, if the line is commented out I get:
>
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hda: drive not ready for command
Translation the HOST is not setup and the enable hooks are broken.
If you write to those bits it will tank the controller, and that is as
much as I can come forward on at this point. This is appears to be
exclusive to the TransMeta based NorthBridge + ALI south bridge.
Regards,
Andre Hedrick
LAD Storage Consulting Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 31 2002 - 22:00:14 EST